REFERENCES
- S. p. KEELER: in ‘Mechanics of sheet metal forming’, (ed. D. P. Koistinen and N.-M. Wang), 3-17; 1978, New York, Plenum Press.
- P. B. MELLOR: Int. Met. Rev., 1981, 26, 1–20.
- A. K. GHOSH, S. S. HECKER, and S. P. KEELER: in ‘Workability testing techniques’, (ed. G. E. Dieter), 135-195; 1984, Metals Park, OH, American Society for Metals.
- R. HILL: Proc. R. Soc., 1948, A193, 281–297.
- N.-M. WANG and S. C. TANG (eds.): ‘Computer modelling of sheet metal forming process’; 1985, Warrendale, PA, Metallurgical Society of AIME.
- V. KOKKONEN: in Ref. 5, pp. 13-20.
- M. HIGASHI, T. MORI, H. TANIGUCHI, and J. YOSHIMA: in Ref. 5, pp. 21-35.
- N.-M. WANG and B. BUDIANSKY: J. Appl. Mech. (Trans. ASME), 1978, 45, 73–82.
- R. D. WOOD, K. MATTIASSON, M. E. HONNOR, and O. C. ZIENKIEWICZ: in Ref. 5, pp. 121-142.
- R. W. LOGAN and W. F. HOSFORD: in Ref. 5, pp. 225-242.
- F. J. ARLINGHAUS, W. H. FREY, T. B. STOUGHTON, and B. K. muirry: in Ref. 5, pp. 51-64.
- T. B. STOUGHTON: in Ref. 5, pp. 143-159.
- S. C. TANG, J. GRESS, and P. LING: in Proc. 15th Biennial Congr, IDDRG, Dearborn, MI, May 1988, ASM Inter-national, 185-193.
- Y. GERMAIN, K. CHUNG, and R. H. WAGONER: Mt. J. Mech. Sci., 1989, 31, 1–24.
- R. HILL: Math. Proc. Cambridge Philos. Soc., 1979, 85, 179–191.
- S. Y. CHUNG and D. W. SWIFT: Proc. Inst. Mech. Eng., 1951, 165,199–223.
- W. F. HOSFORD and W. A. BACKOFEN: in ‘Fundamentals of deformation processing’, Proc. 9th Sagamore Conf., 259-298; 1962, Syracuse, NY, Syracuse University Press.
- R. L. WHTELEY: Trans. ASM, 1960, 52, 154–163.
- G. I. TAYLOR: J. Inst. Met., 1938, 62, 307–324.
- I. L. DILLAMORE: J. Phys. D, Series 2, 1974, 7, 979–991.
- J. F. HELD: in Proc. Conf. ‘Mechanical working and steel processing’, Vol. 3; New York 1966, American Institute of Mining, Metallurgical and Petroleum Engineers.
- J. F. W. BISHOP and R. mu,: Philos. Mag., 1951, 42, 414–427.
- W. F. HOSFORD and C. ium: Metall. Trans., 1976, 7A, 468–472.
- D. V. WILSON: J. Inst. Met., 1966, 94, 84–93.
- W. T. LANKFORD, S. C. SNYDER, and J. A. BAUSCHER: Trans. ASM, 1950, 42, 1197–1225.
- D. H. LLOYD: Sheet Met. Ind., 1962, 39, 306–315.
- D. V. WILSON: Metall. Rev., 1969, 14, 175–188.
- A. V. HERSHEY: J. Appl. Mech., 1954, 76, 241–249.
- W. F. HOSFORD: J. Appl. Mech. (Trans. ASME), 1972, 39, 607–609.
- R. W. LOGAN, D. J. MEULEMAN, and W. F. HOSFORD: in ‘Formability and metallurgical structure’, (ed. A. K. Sach-dev and J. D. Embury), 159-173: 1987, Warrendale, PA, Metallurgical Society of AIME.
- P. B. MELLOR and A. PARMAR: in ‘Mechanics of sheet metal forming’, (ed. D. P. Koistinen and N.-M. Wang), 53-72; 1978, New York, Plenum Press.
- J. LIAN, D. ZHOU, and B. BAUDELET: mt. .1. Mech. Sci., 1989, 31, 237–261.
- M. GOTOH: Int. J. Mech. Sci., 1977, 19, 505–520.
- F. BARLAT and J. LIAN: Int. J. Plasticity, 1989, 5, 51–66.
- D. J. LEGE, F. BARLAT, and J. C. BREM: Int. J. Mech. Sci., 1989, 31, 549–563.
- H. J. BUNGE: Z. Metal/k., 1965, 56, 872–874.
- H. J. BUNGE and W. T. ROBERTS: J. Appl. Crystallogr., 1969, 2, 116–128.
- C. S. da C. VIANA, J. S. KALLEND, and G. J. DAVIES: Int. J. Mech. Sci., 1979, 21, 335–371.
- P. NI. B. RODRIGUES and P. S. BATE: in ‘Textures in non-ferrous metals and alloys’, (ed. H. D. Merchant and J. G. Morris), 173-187; 1984, Warrendale, PA, Metallurgical Society of AIME.
- W. F. HOSFORD and R. H. ZEISLOFT: Metall. Trans., 1972, 3, 113–121.
- P. S. BATE, W. T. ROBERTS, and D. V. WILSON: Acta Metall., 1981, 29, 1797–1814.
- P. S. BATE, W. T. ROBERTS, and D. V. WILSON: Acta Metall., 1982, 30, 725–737.
- P. JOBSON and W. T. ROBERTS: Metall. Trans., 1977, 8A, 2013–2014.
- R. J. ASARO and A. NEEDLEMAN: Acta Metall., 1985, 33, 923–953.
- D. LEE and F. ZAVERL: Metall. Trans., 1980, 11A, 983–991.
- ‘Constitutive equations: Micro and macro aspects’, J. Eng. Mater. Technol. (Trans. ASME), 1984, 106, 285–419.
- E. W. HART: in ‘Constitutive equations: Micro and macro aspects’, J. Eng. Mater. Technol. (Trans. ASME), 1984, 106, 322–325.
- J. KRATOCHVIL and M. TOKUDA: in ‘Constitutive equations: Micro and macro aspects’, J. Eng. Mater. Technol. (Trans. ASME), 1984, 106, 299–303.
- T. C. LOWE and A. K. MILLER: in ‘Constitutive equations: Micro and macro aspects’, J. Eng. Mater. Technol. (Trans. ASME), 1984, 106, 337–348.
- D. D. OLANDER and A. K. MILLER: in Proc. 15th Biennial Cong. IDDRG, Dearborn, MI, May 1988, ASM Inter-national, 133-144.
- H. W. swwr: J. Inst. Met., 1952, 81, 109–120.
- E. VOCE: J. Inst. Met., 1948, 74, 537-562; 760–771.
- It. H. WAGONER: Metall. Trans., 1980, 11A, 165–175.
- D. V. WILSON, A. R. MIRSFIAMS, and W. T. ROBERTS: in ‘Developments in the drawing of metals’, 198-204; 1983, London, The Metals Society.
- J. BAUSCHINGER: Mitt. K. Tech. Hochschule, München, 1886, 13, 1.
- ‘The Bauschinger effect’, Mater. Forum, 1987, 10, 5–63.
- R. H. WAGONER and J. V. LAUKONIS: Metall. Trans., 1983, 14A, 1487–1495.
- M. ZANDRAHIMI, S. PLATIAS, D. PRICE, D. BARRETT, P. S. BATE, W. T. ROBERTS, and D. V. WILSON: Metall. Trans., 1989, 20A, 2471–2482.
- T. HASEGAWA, T. YAKOU, and S. KARASCHIMA: Mater. Sci. Eng., 1975, 20, 267–276.
- B. V. N. RAO and J. V. LAUKONIS: Mater. Sci. Eng., 1983, 60, 125–135.
- D. V. WILSON, M. ZANDRAHIMI, and W. T. ROBERTS: Acta Metall., 1990, 38, 215–226.
- R. H. WAGONER: in Ref. 5, pp. 77-92.
- A. N. BRAMLEY and P. B. MELLOR: J. Strain Anal., 1966, 1, 439–446.
- D. V. witsoN: Met. Technol., 1980, 7, 282–292.
- T. J. NIHILL and J. L. WHITE: in Proc. 15th Biennial Cong. IDDRG, Dearborn, MI, May 1988, ASM International, 17-24.
- D. V. WILSON, W. T. ROBERTS, N. K. WONG, and P. K. sEhourra: in ‘Proc. 3rd int. conf. on mechanical behaviour of materials’, (ed. K. J. Miller and R. F. Smith), Vol. 2, 583–594; 1979, Oxford, Pergamon Press.
- D. V. WILSON: J. Mech. Work. Technol., 1988, 16, 269–277.
- H. T. COUPLAND and D. V. WILSON: Sheet Met. Ind., 1958, 35, 85–103.
- A. FERRON: in Proc. 10th Biennial Cong. IDDRG, 303-316; 1978, Redhill, Portcullis.
- R. STBIBECX: Z. Ver. Dt. Eng., 1902, 46, 1341.
- P. A. STINE, R. E. SEWARD, M. T. BEYERLE, and P. C. LUKEN: in Ref. 5, pp. 107-120.
- H. D. NINE: in ‘Mechanics of sheet metal forming’, (ed. D. P. Koistinen and N.-M. Wang), 179-207; 1978, New York, Plenum Press.
- D. V. WILSON: Sheet Met. Ind., 1966, 43, 929–944.
- W. R. D. WILSON: in ‘Mechanics of sheet metal forming’, (ed. D. P. Koistinen and N.-M. Wang), 157-174; 1978, New York, Plenum Press.
- B. D. McLAUGHLAN and J. L. DUNCAN: in Proc. 10th Biennial Cong. IDDRG, 317-324; 1978, Redhill, Portcullis.
- R. H. WAGONER and N.-M. WANG: Int. J. Mech. Sci., 1979, 21, 255–264.
- D. V. WILSON: in ‘Formability and metallurgical structure’, (ed. A. K. Sachev and J. D. Embury), 3-32; 1987, Warrendale, PA, Metallurgical Society of AIME.
- W. ENGELHARDT: Technik, 1961, 16, 763.
- D. V. WILSON, B. J. SUNTER, and D. F. MARTIN: Sheet Met. Ind., 1966, 43, 465–476.
- M. ATKINSON: J. Iron Steel Inst., 1970, 208, 58–66.
- G. SACHS: ‘Sheet metal fabricating’, 91-278; 1951, New York, Reinhold.