REFERENCES
- S. MISHRA and c. DARMANN: Int. Met. Rev., 1982, 27, (6), 307.
- W. B. HUTCHINSON: Int. Met. Rev., 1984, 29, (1), 25.
- T. TANAKA: Int. Met. Rev., 1981, 26, (4), 185.
- H. INAGAKI: in Proc. 6th Int. Conf. on ‘Textures of materials’, Vol. 1, 149; 1981, Tokyo, The Iron and Steel Institute of Japan.
- E. C. BAIN: Trans. AIME, 1924, 70, 25.
- G. KURDJUMOV and G. SACHS: Z. Phys., 1930, 64, 225.
- z. NISHIYAMA: Sci. Rep. Res. Inst., Tohoku Univ., 1934-35, 23, 638.
- G. WASSERMANN: Arch. Eisenhiittenwes., 1933, 16, 647.
- A. B. GRENINGER and A. R. TROIANO: Trans. AIME, 1949, 185, 59.
- G. J. DAVIES, J. S. ICALLEND, and P. P. MORRIS: Acta Metall., 1976, 24, 159.
- H. INAGAKI: Z. Metallkd., 1984, 75, 510.
- H. INAGAKI: Z. Metallkd., 1988, 79, 716.
- G. STONE and G. THOMAS: Metall. Trans., 1974, 5A, 2095.
- E. FURUBAYASHI, H. MIYAJI, and M. NOBUKI: Trans. Iron Steel Inst. Jpn, 1987, 27, 513.
- G. J. DAVIES: in Proc. 5th Int. Conf. on ‘Textures of materials’, Vol. 2, 121; 1978, Berlin, Springer-Verlag.
- Ph. CHAPELLIER: MEng thesis, McGill University, Montreal, 1989.
- H. J. BUNGE: ‘Texture analysis in materials science’; 1982, London, Butterworths.
- L. G. SCHULZ: J. Appl. Phys., 1949, 20, 1030.
- B. F. DECKER, E. T. ASP, and D. HARKER: J. Appl. Phys., 1948, 19, 388.
- M. HATHERLEY and W. B. HUTCHINSON: ‘An introduction to textures in metals’: 1979, London, The Institution of Metallurgists.
- B. D. CULLITY: ‘Elements of X-ray diffraction’; 1978, Reading, MA, Addison-Wesley.
- K. LüCXE: in Proc. 6th Int. Conf. on ‘Textures of materials’, Vol. 1, 14; 1981, Tokyo, The Iron and Steel Institute of Japan.
- R. J. ROE: J. Appl. Phys., 1965, 36, 2024, 2069.
- H. J. BUNGE: Z. Metallkd., 1965, 56, 872
- H. j. BUNGE: `Mathematische Methoden der Texturanalyse'; 1969, Berlin, Akademie Verlag.
- P. R. MORRIS and A. J. HECKLER: ‘Advances in X-ray analysis’, Vol. 11, 454; 1968, New York, Plenum Press.
- J. HANSEN, J. POSPIECH, and K. LOCKE: ‘Tables for texture analysis of cubic crystals’: 1978, Berlin, Springer-Verlag.
- H. J. BUNGE and C. ESLING (eds.): ‘Quantitative texture analysis’, 271; 1982, Oberursel, FRG, Deutsche Gesellschaft fiir Metallkunde and Société Frangaise de Métallurgie.
- D. DANIEL: PhD thesis, McGill University, Montreal, 1990.
- PH. LEQUEU and J. J. JONAS: Metall. Trans., 1988, 19A, 105.
- L. S. TOTH, R. K. RAY, and J. J. JONAS: Metall. Trans., in press.
- H. INAGAKI and T. SUDA: Texture, 1972, 1, 129.
- M. SEMCHYSEN and G. A. nmmoNs: Trans. AIME, 1952, 194, 279.
- R. MESMER and N. LOUAT: Acta Metall., 1965, 13, 563.
- T. H. WEBSTER: Acta Metall., 1970, 18, 683.
- T. NAKAMURA, T. SAICAKI, Y. ROE, E. FUKUSHIMA, and H. INAGAKI: Trans. Iron Steel Inst. Jpn, 1975, 15, 561.
- H. INAGAKI, K. KUIUHARA, and 1. KOZASU: Trans. Iron Steel Inst, Jpn, 1977, 17, 75.
- W. E. HOSFORD and w. A. BACKOFEN: ‘Fundamentals of defor-mation processing’, 259; 1964, New York, Syracuse Uni-versity Press.
- R. SHOEFIELD, G. ROWNTREE, N. V. SARMA, and R. T. WEINER: Met. Technol., 1974, 1, 325.
- G. R. SPEICH and D. S. DABKOWSKI: in ‘The hot deformation of austenite’, 557; 1977, New York, American Institute of Mining, Metallurgical and Petroleum Engineers.
- B. L. BRAMFIT and A. R. MARDER: Metall. Trans., 1977, 8A, 1263.
- HUNG-CHI CHAO: Metall. Trans., 1978, 9A, 509.
- G. BALDI and G. BUZZICHELLI: Met. Sci., 1978, 12, 459.
- s. MATSUDA and Y. ICAWASHIMA: in Proc. 6th Int. Conf. on ‘Textures of materials’, Vol. 1, 659; 1981, Tokyo, The Iron and Steel Institute of Japan.
- D. L. BOURELL: Metall. Trans., 1983, 14A, 2487.
- D. L. BOURELL AND O. D. SFIERBY: Metall. Trans., 1983, 14A, 2563.
- H. INAGAKI: Z. Metallkd., 1985, 76, 85.
- H. INAGAKI: Z. Metallkd., 1988, 79, 364.
- F. H. SAMUEL, R. BARBOSA, F. BORATTO, S. YIJE, and J. J. JONAS: in Proc. Int. Conf. on 'Physical metallurgy of thermo- mechanical processing of steels and other metals', Vol. 2, 721; 1988, Tokyo, The Iron and Steel Institute of Japan.
- K. HASLAM, T. COLEMAN, D. DULIEU, and I. L. DILLAMORE: in ‘Deformation and recrystallization textures in metals and their industrial applications’, European Colloq. on Textures, Pont-A-Mousson, 1973, Societe Frangaise de Métallurgie, 369.
- G. J. DAVIES, J. S. ICALLEND, and T. RUBERG: in ‘Deformation and recrystallization textures in metals and their industrial applications’, European Colloq. on Textures, Pont-a-Mousson, 1973, Societe Frangaise de Métallurgie, 299.
- H. Hu and J. S. KALLEND: in Proc. 6th Int. Conf. on ‘Textures of materials’, Vol. 1, 164; 1981, Tokyo, The Iron and Steel Institute of Japan.
- H. Hu, R. S. CLINE, and S. R. GOODMAN: in `Recrystallization, grain growth and textures', 295; 1965, Metals Park, OH, American Society for Metals.
- S. R. GOODMAN and H. Hu: Trans. AIME, 1964, 230, 1413.
- S. R. GOODMAN and H. Hu: Trans. AIME, 1965, 233, 103.
- T. YUTOIU and R. OGAWA: in Proc. 6th Int. Conf. on ‘Textures of materials’, Vol. 1, 669; 1981, Tokyo, The Iron and Steel Institute of Japan.
- H. INAGAKI: Trans. Iron Steel Inst. Jpn, 1977, 17, 166.
- H. INAGAKI: in Proc. 5th Int. Conf. on ‘Textures of materials’, Vol. 2, 157; 1978, Berlin, Springer-Verlag.
- G. J. DAVIES, J. S. KALLEND, and P. P. MORRIS: in ‘The hot deformation of austenite’, 599; 1977, New York, American Institute of Mining, Metallurgical and Petroleum Engineers.
- H. INAGAKI: Z. Metallkd., 1983, 74, 716.
- H. WATANABE, Y. E. SMITH, and R. D. PEHLKE: in ‘The hot deformation of austenite’, 140; 1977, New York, American Institute of Mining, Metallurgical and Petroleum Engineers.
- A. J. DAVENPORT, R. E. MINER, and it. A. KOT: in ‘The hot deformation of austenite’, 186; 1977, New York, American Institute of Mining, Metallurgical and Petroleum Engineers.
- T. G. OAKWOOD, W. E. HEITMANN, and E. S. MADRZYIC: in ‘The hot deformation of austenite’, 204; 1977, New York, American Institute of Mining, Metallurgical and Petroleum Engineers.
- M. J. STEWART: in ‘The hot deformation of austenite’, 233; 1977, New York, American Institute of Mining, Metallurgi-cal and Petroleum Engineers.
- M. LAMBERIGHTS and T. GREDAY: in ‘The hot deformation of austenite’, 286; 1977, New York, American Institute of Mining, Metallurgical and Petroleum Engineers.
- C. OUCHI, T. SANPEI, T. OKITA, and I. KOZASU: in ‘The hot deformation of austenite’, 316; 1977, New York, American Institute of Mining, Metallurgical and Petroleum Engineers.
- R. COLADAS, J. MASOUNAVE, and J. P. BAILON; In ‘The hot deformation of austenite’, 341; 1977, New York, American Institute of Mining, Metallurgical and Petroleum Engineers.
- T. TANAKA, N. TABATA, T. HATOMURA, and C. SHIGA: in `Microalloying ‘75’, 107; 1977, New York, Union Carbide Corporation.
- T. GREDAY and M. LAMBERIGHTS: in `Microalloying ‘75’, 172; 1977, New York, Union Carbide Corporation.
- J. IRVINE and T. N. BAKER: Met. Sci., 1979, 13, 228.
- J. J. JONAS and I. WEISS: Met. Sci., 1979, 13, 238.
- I. WEISS and J. J. JONAS: Metall. Trans., 1979, 10A, 831.
- W. CHARNOCK and J. Nun-Pro: Met. Sci. J., 1967, 1, 123.
- H. ABE and K. no: J. Jpn Inst. Met., 1967, 31, 1300.
- R. E. SIVIALLMAN and D. GREEN: Acta Metall., 1964, 12, 145.
- W. R. HIRBARD and w. R. mum: Trans. AIME, 1961, 221, 336.
- A.D. KING and T. BELL: Metall. Trans., 1975, 6A, 1419.
- W. J. McG. TEGART and A. GITTINS: in ‘The hot deformation of austenite’, 1; 1977, New York, American Institute of Mining, Metallurgical and Petroleum Engineers.
- T. TANAKA, T. HATOMURA, and N. TABATA: Tetsu-to-Hagane (J. Iron Steel Inst. Jpn), 1976, 62, S206.
- J. S. KALLEND, P. P. MORRIS, and G. J. DAVIES: Acta Metall., 1976, 24, 361.
- T. GLADMAN AND D. DULIEU: Met. Sci., 1974, 8, 167.
- G. J. DAVIES and R. M. BATENIAN: in Proc. 6th Int. Conf. on ‘Textures of materials’, Vol. 1, 132; 1981, Tokyo, The Iron and Steel Institute of Japan.
- T. COLEMAN, D. MILIEU, and A. GOUCH: in ‘The microstructure and design of alloys’, Vol. 1, 70; 1974, London, The Metals Society.
- J. H. LITTLE, J. A. CHAPMAN, W. B. MORRISON, and B. MINTZ: in 'The microstructure and design of alloys', Vol. 1, 80; 1974, London, The Metals Society.
- T. TANAKA and N. TABATA: Tetsu-to-Hagane (J. Iron Steel Inst. Jpn), 1978, 64, 1353.
- B. L. BRAmFrr and A. R. HARDER: in ‘Processing and properties of low carbon steels’, 191; 1973, New York, American Insti-tute of Mining, Metallurgical and Petroleum Engineers.
- C. H. VLAD and H. J. BUNGE: in Proc. 6th Int. Conf. on ‘Textures of materials’, Vol. 1, 649; 1981, Tokyo, The Iron and Steel Institute of Japan.
- H. INAGAKI and M. KODAMA: Tetsu-to-Hagane (J. Iron Steel Inst. Jpn), 1981, 67, S640.
- G. F. MELLOY and J. D. DENNISON: in ‘The microstructure and design of alloys’, Vol. 1, 60; 1974, London, The Metals Society.
- H. SAITOH, K. USHIODA, T. SENUMA, T. NAKAMURA, and K. ESAKA: in Proc. Int. Conf. on ‘Physical metallurgy of thermomechanical processing of steels and other metals’, Vol. 2, 628; 1988, Tokyo, The Iron and Steel Institute of Japan.
- T. SENUMA and H. YADA: in Proc. Int. Conf. on ‘Physical metallurgy of thermomechanical processing of steels and other metals’, Vol. 2, 636; 1988, Tokyo, The Iron and Steel Institute of Japan.
- T. NAKAMURA and K. ESAKA: in Proc. Int. Conf. on ‘Physical metallurgy of thermomechanical processing of steels and other metals’, Vol. 2, 644; 1988, Tokyo, The Iron and Steel Institute of Japan.
- S. HASHIMOTO, T. YAKUSHIJI, T. ICASHIMA, and K. HOSOMI: in Proc. Int. Conf. on ‘Physical metallurgy of thermomechani-cal processing of steels and other metals’, Vol. 2, 652; 1988, Tokyo, The Iron and Steel Institute of Japan.
- S. HASHIMOTO, T. YAKUSHIJI, T. KASHIMA, and K. HOSOMI: in Proc. 8th Int. Conf. on ‘Textures of materials’, 673; 1988, Warrendale, PA, The Metallurgical Society of AIME.
- C. A. STICKLES: Trans. AIME, 1967, 239, 1857.
- R. O. WILLIAMS: Trans. AIME, 1962, 224, 129.
- I. L. DILLAMORE and W. T. ROBERTS: J. Inst. Met., 1963-64, 92, 193.
- T. YUTORI and R. OGAWA: Tetsu-to Hagane (J. Iron Steel Inst. Jpn), 1979, 65, 1747.
- M. A. JASWON and J. A. WHEELER: Acta Crystallogr., 1948, 1, 216.
- R. K. RAY, PH. CHAPELLIER, and J. J. JONAS: ‘Textures and microstructures’, in press.
- H. INAGAKI: Trans. Iron Steel Inst. Jpn, 1983, 23, 1059.
- A. KELLY and G. W. GROVES: ‘Crystallography and crystal defects’, 295, 328; 1970, London, Longmans.
- A. JONES and B. WALKER: Met. Sci., 1974, 8, 397.
- J. S. KALLEND and G. J. DAVIES: Philos. Mag., 1972, 25, 471.
- J. POSPIECH, J. JURA, and A. MACIOSOWSKI: in ‘Deformation and recrystallization textures in metals and their industrial appli-cations’, European Colloq. on Textures, Pont-a-Mousson, 1973, Societe Frangaise de Métallurgie, 117.
- C. M. SARGENT: Scr. Metall., 1974, 8, 821.
- G. J. DAVIES, D. J. GOODWILL, and J. S. KALLEND: J. Appl. Crystallogr., 1971, 4, 67.
- G. J. DAVIES, D. J. GOODWILL, and J. S. KALLEND: J. Appl. Crystallogr., 1971, 4, 193.
- G. J. DAVIES, J. S. KALLEND, and T. RUBERG: Met. Sci., 1975, 9, 421.
- H. ABE, K. rro, and R. FUKUMOTO: J. Jpn Inst. Met., 1967, 31, 37.
- C. ESLING, F. WAGNER, R. BARO, and M. ENGLANDER: in Proc. 5th Int. Conf. on ‘Textures of materials’, Vol. 2, 221; 1978, Berlin, Springer-Verlag.
- F. WAGNER, H. W. BERGMANN, M. HUMBERT, and C. ESLING: in Proc. 6th Int. Conf. on ‘Textures of materials’, Vol. 1, 714; 1981, Tokyo, The Iron and Steel Institute of Japan.
- B. B. RATH, J. S. KALLEND, C. L. VOLD, R. A. MASURA, and A. IMAM: in Proc. 7th Int. Conf. on ‘Textures of materials’, 339; 1984, Zwijndrecht, Netherlands Society for Materials Science.
- F. BORIK and R. H. RICHMAN: Trans. AIME, 1967, 239, 675.
- H. KUBOTERA, K. NAICAOKA, and T. NAGAMINE: Nippon Kokan Tech. Rep., May 1968, 19.
- N. INAKAZU and H. YAMAMOTO: in Proc. 6th Int. Conf. on ‘Textures of materials’, Vol. 2, 873; 1981, Tokyo, The Iron and Steel Institute of Japan.
- R. M. BATEMAN and G. J. DAVIES: in Proc. 6th Int. Conf. on ‘Textures of materials’, Vol. 1, 690; 1981, Tokyo, The Iron and Steel Institue of Japan.
- M. HUMBERT, F. WAGNER, W. P. LIU, C. ESLING, and H. J. BUNGE: in Proc. 8th Int. Conf. on ‘Textures of materials’, 743; 1988, Warrendale, PA, The Metallurgical Society of AIME.
- J. R. PATEL and M. COHEN: Acta Metall., 1953, 1, 531.
- J. C. BOKROS and E. R. PARKER: Acta Metall., 1963, 11, 1291.
- Y. HIGO, F. LECROISEY, and T. MORI: Acta Metall., 1974, 22, 313.
- H. MIYAJI, M. NOBUKI, N. SAICUMA, T. MITSUI, H. NAKAJIMA, and E. FURUBAYASHI: in Proc. Int. Conf. on 'Physical metallurgy of thermomechanical processing of steels and other metals', Vol. 2, 815; 1988, Tokyo, The Iron and Steel Institute of Japan.
- D. GOODCHILD, W. T. ROBERTS, and D. V. WILSON: Acta Metall., 1970, 18, 1137.
- M. KATO and T. MORI: Acta Metall., 1976, 24, 853.
- M. KATO and T. MORI: Acta Metall., 1977, 25, 951.
- T. N. DURLU and J. W. CHRISTIAN: Acta Metall., 1979, 27, 663.
- A. J. BOGERS and W. G. BURGERS: Acta Metall., 1964, 12, 255.
- E. FURUBAYASHI: Tetsu-to-Hagané (J. Iron Steel Inst. Jpn), 1985, 71, 1155, 1359.
- J. GREWEN and G. WASSERMANN: Texture, 1975, 2, 45.