References
- R. RAJ: J. Am. Ceram. Soc., 1993, 76, 2147–2174.
- M. MATSUI: Ceram. Int., 1993, 19, 9–16.
- V. SMITH, B. DECKMAN, and D. BRUECK: Am. Ceram. Soc. Bull., 1994, 73, 49–52.
- F. THCIMMLER: J. Eur. Ceram. Soc., 1990, 6, 139–151.
- R. N. KATZ: Ind. Ceram., 1997, 17, 158–164.
- G. W. H. FEUER, L. FRASSEK, L. SCHOENFELDER, and G. LEIMER: cfilBer. DKG, 1998, 75, 25–30.
- R. W. DAVIDGE: ‘Mechanical behaviour of ceramics’; 1979, Cambridge, Cambridge University Press.
- R. MORRELL: ‘Handbook of properties of technical and engin-eering ceramics’, Part 1, 'An introduction for the engineer and designee; 1987, London, HMSO.
- A. G. EVANS and T. G. LANGDON: Prog. Mater. Sci., 1976, 21, 171–425.
- A. G. EVANS: J. Am. Ceram. Soc., 1990, 73, 187–206.
- R. F. COOK and G. M. PHARR: in ‘Materials science and technology’, Vol. 11, ‘Mechanical properties of ceramics’, (ed. M. V. Swain), 339-407; 1994, Weinheim, VCH.
- P. F. BECHER: in ‘Materials science and technology’, Vol. 11, ‘Mechanical properties of ceramics’, (ed. M. V. Swain), 409-461; 1994, Weinheim, VCH.
- G. PETZOW and F. MUECKLICH: Prakt. Metallogr., 1996, 33, 64–82.
- F. F. LANGE: J. Am. Ceram. Soc., 1989, 72, 3–15.
- A. P. BROMLEY, D. A. HUTSON, F. L. RILEY, and L. S. TOVEY: Ind. Ceram., 1996, 16, 23–26.
- M. RUEHLE and A. G. EVANS: Prog. Mater. Sci., 1989, 33, 85–167.
- A. G. EVANS and R. M. CANNON: Acta Metall., 1986, 34, 761–800.
- A. G. EVANS and R. M. McMEENING: Acta Metall., 1986, 34, 2435–2441.
- P. F. BECHER: J. Am. Ceram. Soc., 1991, 74, 255–269.
- P. F. BECHER, C. H. HSUEH, P. ANGELINI, and T. N. TIEGS: J. Am. Ceram. Soc., 1988, 71, 1050–1061.
- K. NIIHARA: J. Ceram. Soc. Jpn, 1991, 99, 974–982.
- M. STERNITZKE: J. Eur. Ceram. Soc., 1997, 17, 1061–1082.
- M. P. HARMER, H. M. CHAN, and G. A. MILLER: J. Am. Ceram. Soc., 1992, 75, 1715–1728.
- W. J. CLEGG, K. KENDALL, N. McN. ALFORD, T. W. BUTTON, and J. D. BIRCHALL: Nature, 1990, 347, 455–457.
- W. A. SANDERS and D. M. MIESKOWSKI: J. Am. Ceram. Soc., 1985, 64, 304–309.
- D. R. CLARKE: J. Am. Ceram. Soc., 1987, 70, 15–22.
- ‘Materials science and technology’, Vol. 17B, ‘Processing of ceramics’, (ed. R. J. Brook); 1996, Weinheim, VCH.
- B. DJURfafa, I. J. DAVIES, S. PICKERING, D. McGARRY, E. BULLOCK, M. VERWERFT, P. M. BRONSVELD, and J. Th. M. DE HOSSON: SiiiC. Ind., 1995, 7-8, 203-210.
- A. J. PYZIK and H. R. BEAMAN: J. Am. Ceram. Soc., 1993, 76, 2737–2744.
- K. HIRAO, M. OHASHI, M. E. BRITO, and S. KANZAKI: J. Am. Ceram. Soc., 1995, 78, 1687–1690.
- Ch. A. WOOD, H. ZHAO, and Y.-B. CHENG: J. Am. Ceram. Soc., 1999, 82, 421–428.
- J. J. CAO, W. J. MOBERLYCHAN, L. C. DE JONGHE, Ch. J. GILBERT, and R. O. RITCHIE: J. Am. Ceram. Soc., 1996, 97, 416–469.
- N. P. PADTURE: J. Am. Ceram. Soc., 1994, 77, 519–523.
- L. C. STEARNS, J. ZHAO, and M. P. HARMER: J. Eur. Ceram. Soc., 1992, 10, 473–477.
- L. CARROLL, M. STERNITZKE, and B. DERBY: Acta Mater., 1996, 44, 4543–4552.
- K. NIIHARA and A. NAKAHIRA: Proc. 3rd Int. Symp. on ‘Ceramic materials and components for engines’, (ed. V. J. Tennery), 919-926; 1988, Westerville, OH, American Ceramic Society.
- R. RIEDEL, K. STRECKER, and G. PETZOW: J. Am. Ceram. Soc., 1989, 72, 2071–2077.
- R. RIEDEL, M. SEHER, J. MAYER, and D. V. SZABO: J. Eur. Ceram. Soc., 1995, 15, 703–715.
- P. SAJGALIK, J. DUSZA, F. HOFER, P. WARBICHLER, M. REECE, and J. KOZANKOVA: J. Mater. Sci. Lett., 1996, 15, 72–76.
- W. J. CLEGG: Acta Metall. Mater., 1992, 40, 3085–3093.
- J. REQUENA, R. MORENO, and J. S. MOYA: J. Am. Ceram. Soc., 1989, 72, 1511–1513.
- A. J. SANCHEZ-HERENCIA, J. S. MOYA, and A. P. TOMSIA: Scr. Mater., 1998, 1, 1–5.
- M. JIMENEZ-MELENDO, C. CLAUSS, A. DOMINGUEZ-RODRIGUEZ, G. DE PORTU, E. RONCARI, and P. PINASCO: Acta Mater., 1998, 46, 3995–4004.
- D. B. MARSHALL, J. J. RATTO, and F. F. LANGE: J. Am. Ceram. Soc., 1991, 74, 2979–2987.
- P. S. NICHOLSON, P. SARKAR, and X. HAUNG: J. Mater. Sci., 1993, 28, 6274–6278.
- J.-L. HUANG, Y.-L. CHANG, and H.-H. LU: J. Mater. Res., 1997, 12, 2337–2344.
- P. SAJGALIK, Z. LENCES, and J. DUSZA: J. Mater. Sci., 1996, 31, 4837–4842.
- S. KANZAKI, M. E. BRITO, M. C. VALECILLOS, K. HIRAO, and M. TORIYAMA: J. Eur. Ceram. Soc., 1997, 17, 1841–1847.
- H. M. CHAN and M. P. HARMER: in ‘Materials science and technology’, Vol. 17B, ‘Processing of ceramics’, (ed. R. J. Brook), 177-215; 1996, Weinheim, VCH.
- G. PETZOW, R. TELLE, and R. DANZER: Mater. Charact., 1991, 26, 289–294.
- R. TELLE: Prakt. Metallogr., 1995, 32, 440–466.
- M. P. HARMER, H. M. CHAN, and G. A. MILLER: J. Am. Ceram. Soc., 1992, 75, 1715–1728.
- J.-L. HUANG, F.-CH. CHOU, and H.-H. LU: J. Mater. Res., 1997, 12, 2357–2365.
- J. S. MOYA: Adv. Mater., 1995, 7, 185–189.
- H. uu and S. M. xsu: J. Am. Ceram. Soc., 1996, 79, 2452–2457.
- J. L. CHERMANT and F. OSTERSTOCK: J. Mater. Sci., 1976, 11, 1939–1951.
- A. PATEL, I. NETTLESHIP, and E. J. PALMIERE: Mater. Charact., 1997, 39, 15–23.
- G. PEZZOTTI, B.-T. LEE, K. HIRAGA, and T. NISHIDA: J. Mater. Sci., 1993, 28, 4787–4798.
- G. WOETTING, G. KANKA, and G. ZIEGLER: in `Non-oxide technical and engineering ceramics', (ed. S. Hampshire), 83-96; 1986, London, Elsevier Applied Science.
- P. OBENAUS and M. HERRMANN: Prakt. Metallogr., 1990, 27, 503–513.
- F. MUECKLICH, S. HARTMANN, M. J. HOFFMANN, G. A. SCHNEIDER, J. OHSER, and G. PETZOW: in ‘Key engineering materials’, Vols. 89-91, ‘Silicon nitride '93’, (ed. M. J. Hoffmann et al), 465–470; 1994, Aedermannsdorf, Trans Tech Publications.
- H. BJOERKLUND, J. WASEN, and L. K. L. FALK: J. Am. Ceram. Soc., 1997, 80, 3061–3069.
- M. K. CINIBULK, H.-J. KLEEBE, and M. RUEHLE: J. Am. Ceram. Soc., 1993, 76, 426–432.
- W. BRAUE, R. W. CARPENTER, and D. J. SMITH: J. Mater. Sci., 1990, 25, 2949–2957.
- H.-J. KLEEBE, M. J. HOFFMANN, and M. RUEHLE: Z. Metallkd., 1992, 83, 610–617.
- K. D. CHOWDHURY, R. W. CARPENTER, W. BRAUE, J. LIU, and H. MA: J. Am. Ceram. Soc., 1995, 78, 2579-2592.106.
- S. JIAO, M. L. JENKINS, and R. W. DAVIDGE: Acta Mater., 1997, 45, 149–156.
- L. K. L. FALK: J. Eur. Ceram. Soc., 1998, 18, 2263–2279.
- G. D. QUINN: J. Mater. Sci., 1990, 25, 4361–4376.
- w. WEIBULL: Swed. Inst. Eng. Res. Proc., 1939, 151, 1–45.
- F. C. MONKMAN and N. J. GRANT: Proc. ASTM, 1956, 56, 593-620.110.
- C. A. ZAPFFE and M. CLOGG: Trans. ASM, 1945, 34, 71–107.
- C. S. SMITH: ‘A history of metallography’, 97–127; 1960, Chicago, IL, University of Chicago Press (reprinted MITPress).
- V. BIRINGUCCIO: ‘De la pirotechnia’; 1540 (see translation by M. T. Gnudi and C. S. Smith; 1942, New York, AIME).
- C. A. ZAPFFE: Met. Prog., 1947, 51, 428–431.
- C. A. ZAPFFE: Rev. Met. (Paris), 1947, 44, 91–96.
- ‘Metals handbook’, 9th edn, Vol. 12, `Fractography'; 1987, Metals Park, OH, ASM.
- C. R. BROOKS and A. CHOUDHURY: 'Metallurgical failure analysis': 1993, New York, McGraw-Hill.
- J. VARNER and V. FRECHETTE (eds.): ‘Advances in ceramics’, Vol. 22, Tractography of glasses and ceramics'; 1988, Westerville, OH, American Ceramic Society.
- R. BRADT et al. (eds.): ‘Concepts, flaws and fractography: fracture mechanics of ceramics’; 1974, New York, Plenum Press.
- R. W. RICE: in Ref. 79, 3-56.
- V. D. FICHETTE: ‘Advances in ceramics’, Vol. 28, ‘Failure119.analysis of brittle materials’: 1990, Westerville, OH, AmericanCeramic Society.
- J. I. GOLDSTEIN, D. E. NEWBURY, P. ECHLIN, D. C. JOY, A. D. ROMING, Jr, C. E. LYMAN, C. FIORI, and E. LIFSHIN: 121.‘Scanning electron microscopy and X-ray microanalysis’, 2nd edn; 1992, New York, Plenum Press.
- P. J. GOODHEW and F. J. HUMPREYS: 'Electron microscopy and analysis': 1994, London, New York, Philadelphia, PA, Taylor123.and Francis.
- B. BARETZKY, B. REINSCH, U. TAEFFNER, G. SCHNEIDER, and M. RUEHLE: Z. Metallkd., 1996, 87, 332–340.
- R. L. SCHALEK and L. T. DRZAL: Ceram. Ind., 1998, 6, 72–79.
- T. A. CARLSON: ‘Photoelectron and Auger spectroscopy’; 1975, New York, Plenum Press.
- R. WIESENDANGER: 'Scanning probe microscopy and spectroscopy': 1994, Cambridge, Cambridge University Press.
- J. E. de VRIES: JMEPEG, 1998, 7, 303–311.
- W. ARNOLD and H. REITER: in ‘Designing with structural128.ceramics’, (ed. R. W. Davidge and M. H. vande Voorde), 224-242; 1990, Amsterdam, Elsevier Applied Science.
- T. xism and J.-H. two: in 'The science of engineering ceramics ii', (ed. K. Niihara et al), 587-592; 1998, Aedermannsdorf, Trans Tech Publications.
- C. Z. ZHANG, Z. GUO, Y. DONG, H. ZHANG, and J. TIAN: Am. 131. Ceram. Soc. Bull., 1996, 75, 64–66.
- J. N. NESS, W. M. STOBBS, and T. F. PAGE: Philos. Mag. A, 1986,132.54, 679–702.
- G. DREIER, G. ELSSNER, S. SCHMAUDER, and T. SUGA: J. Mater. Sci., 1994, 29, 1441–1448.
- Q. MA and D. R. CLARKE: J. Am. Ceram. Soc., 1993, 76, 1433–1440.
- G. PEZZOTTI, O. SBAIZERO, V. SERGO, N. MURAKI, K. MARUYAMA, and T. NISHIDA: J. Am. Ceram. Soc., 1998, 81, 187–192
- G. PEZZOTTI, N. MURAKI, N. MAEDA, K. SATOU, and T. NISHIDA: J. Am. Ceram. Soc., 1999, 82, 1249–1256.
- G. PEZZOTTI, H. SUENOBU, T. NISHIDA, and O. SBAIZERO: J. Am. Ceram. Soc., 1999, 82, 1257–1262.
- J. DUSZA: in ‘Key engineering materials’, Vols. 108-110, ‘Ceramic matrix composites’, (ed. G. M. Newaz et al), 323-354; 1995, Aedermannsdorf, Trans Tech Publications.
- J. ROEDEL, J. M. KELLY, and B. R. LAWN: J. Am. Ceram. Soc., 1990, 73, 3313–3318.
- G. VELKINIS, H. R. SHERCLIFF, and P. W. R. BEAUMONT: Acta Metall. Mater., 1990, 38, 1151–1162.
- B. F. SORENSEN, A. HORSEWELL, O. JORGENSEN, A. N. KUMAR, and P. ENGBAEK: J. Am. Ceram. Soc., 1998, 81, 661–669.
- J. L. CHERMANT and M. COSTER: J. Mater. Sci., 1979, 14, 509–534.
- M. COSTER and J. L. CHERMANT: Int. Met. Rev., 1983, 28, 228–250.
- G. PEZZOTTI: Acta Metall. Mater., 1993, 41, 1825–1839.
- G. PEZZOTTI, B.-T. LEE, K. HIRAGA, and T. NISHIDA: J. Mater. Sci., 1994, 29, 1786–1794.
- T. HANSSON, R. WARREN, and J. WASEN: J. Am. Ceram. Soc., 1993, 76, 841–848.
- A. A. WERESZCZAK, M. K. FERBER, and A. PARVIZI-MAJIDI: J. Comp. Mater., 1997, 31, 1905–1919.
- K. BANERJI: Metall. Trans. A, 1988, 19A, 961–971.
- J. J. MECHOLSKY, D. E. PASSOJA, and K. S. FEINBERG-RINGEL: J. Am. Ceram. Soc., 1989, 72, 60–65.
- R. W. RICE: in ‘Fracture mechanics of ceramics’, Vol. 1, (ed. R. Brandt et al), 323-345; 1974, New York, Plenum Press.
- R. W. RICE: in ‘Surfaces and interfaces of glasses and ceramics’, (ed. W. V. Frechette et al.), 439-472; 1974, New York, Plenum Press.
- R. W. RICE: in Tractography of ceramic and metal failures', STP 827, 5-103; 1984, Philadelphia, PA, ASTM.
- A. G. EVANS: J. Am. Ceram. Soc., 1982, 65, 127–137.
- G. D. QUINN and R. MORRELL: J. Am. Ceram. Soc., 1993, 74, 2037–2066.
- 'Fractography and characterization of fracture origins in advanced ceramics', Standard C 1322-96A, in ‘Annual book of ASTM standards’, Vol. 15.1; 1997, Philadelphia, PA, ASTM
- ‘Advanced technical ceramics — monolithic ceramics — pro-cedure for fractographic investigation’, CEN Standard TC 184/WG3, third draft, CEN, Paris, France.
- J. DUSZA: DSc thesis, Institute of Materials Research, SAS, Kosice, Slovakia, 1995.
- J. J. MECHOLSKY, Jr, R. W. RICE, and S. W. FREIMAN: J. Am. Ceram. Soc., 1974, 57, 440–443.
- H. P. KIRCHNER, R. M. GRUVER, and W. A. SOTTER: Philos. Mag., 1976, 33, 775–780.
- A. P. BROMLEY, D. A. HUTSON, F. L. RILEY, and L. S. TOVEY: Ind. Ceram., 16, 23-26.
- K. NOGUCHI, Y. MATSUDA, M. OISHI, T. MASAKI, S. NAKAYAMA, and M. MIZUSHINA: J. Am. Ceram. Soc., 1990, 73, 2667–2676.
- T. OHJI, Y. YAMAUCHI, W. KANEMATSU, and S. ITO: J. Am. Ceram. Soc., 1989, 72, 688–690.
- J. DUSZA and P. gAJGALIK: J. Eur. Ceram. Soc., 1992, 9, 9–17.
- J. DUSZA and P. gAJGALIK: in ‘Advanced multilayered and fibre-reinforced composites’, (ed. Y. M. Haddad), 187-205; 1998, Dordrecht, Kluwer Academic Publishers.
- K. HIRAO, M. OHASHI, M. E. BRITO, and S. KANZAKI: J. Am. Ceram. Soc., 1995, 78, 1687–1690.
- F. F. LANGE, B. I. DAVIS, and E. WRIGHT: J. Am. Ceram. Soc., 1986, 69, 66–72.
- V. K. PUJARI and D. M. TRACEY: Technical Paper 93—GT-319, ASME, New York, USA, 1993.
- Y.-K. JEONG, A. NAKAHIRA, P. E. D. MORGAN, and K. NIIHARA: J. Am. Ceram. Soc., 1997, 80, 1307–1309.
- J.-J. PARK, O. KOMURA, A. YAMAKAWA, and K. NIIHARA: J. Am. Ceram. Soc., 1998, 81, 2253–2260.
- M. J. ANDREWS, A. A. WERESZCZAK, K. BREDER, M. K. FERBER, and T. P. KIRKLAND: Ceram. Eng. Sci. Proc., 1998, 19, 65–78.
- K. BREDER, A. A. WERESZCZAK, and M. J. ANDREWS: Ceram. Eng. Sci. Proc., 1998, 19, 65–78.
- A. JAYATILAKA and K. TRUSTRUM: J. Mater. Sci., 1977, 12, 1426–1430.
- W. E. C. CREYKE, I. E. SAINSBURY, and R. MORRELL: ‘Design with non-ductile materials’: 1982, London, Applied Science Publishing.
- R. DANZER: J. Eur. Cer. Soc., 1992, 10, 461–472.
- A. KHALILI and K. KROMP: Forschr. Ber. DKG, 1990, 5,255–263.
- T. H. SERVICE, J. L. RITTER, Jr, T. SERVICE, and D. SONDERMAN: J. Am. Ceram. Soc., 1985, 64, 1276–1280.
- M. MATSUI: ‘Fracture mechanics of ceramics’, Vol. 11, (ed. R. C. Brandt et al), 1-9; 1996, New York, Plenum Press.
- S. SATO, K. TAGUCHI, R. ADACHI, and M. NAKATANI: Fatigue Fract. Eng. Mater. Struct., 1996, 19, 529–537.
- R. W. DAVIDGE, J. R. McLAREN, and G. TAPPIN: J. Mater. Sci., 1973, 8, 1699–1705.
- S. M. WIEDERHORN and E. R. FULLER, Jr: Mater. Sci. Eng., 1985, 71, 169–186.
- L.-Y. CHAO and D. K. SHETTY: J. Am. Ceram. Soc., 1992, 75, 2116–2124.
- C. BERDIN, G. CAILLETAUD, and D. JEULIN: J. Am. Ceram. Soc., 1996, 79, 2825–2832.
- A. ZIMMERMANN and J. ROEDEL: J. Am. Ceram. Soc., 1998, 81, 2527–2532.
- R. DANZER and T. LUBE: in ‘Fracture mechanics of ceramics’, Vol. 11, (ed. R. C. Brandt et al), 425-439; 1996, New York, Plenum Press.
- H. A. LINDNER: cfilBer. DKG, 1998, 75, 31–39.
- R. M. McMEEKING and A. G. EVANS: J. Am. Ceram. Soc., 1982, 65, 242–246.
- B. BUDIANSKY, J. W. HUTCHINSON, and J. C. LAMBROPOULOS: Int. J. Solids Struct., 1983, 19, 337–355.
- L. R. F. ROSE: J. Mech. Phys. Solids, 1986, 34, 609–616.
- D. J. GREEN, R. H. HANNIK, and M. V. SWAIN: ‘Transformation toughening of ceramics’; 1989, Boca Raton, FL, CRC Press.
- A. G. EVANS and A. H. HEUER: J. Am. Ceram. Soc., 1980, 63, 241–248.
- D. B. MARSHALL, M. D. DRORY, and A. G. EVANS: in ‘Fracture mechanics of ceramics’, Vol. 6, (ed. R. C. Brandt et al); 1983, New York, Plenum Press.
- M. RUEHLE, N. CLAUSSEN, and A. H. HEUER: J. Am. Ceram. Soc., 1986, 69, 195–197.
- L. S. SIGL and K. A. SCHWETZ: Jpn J. Appl. Phys., 1994, 10, 224–225.
- H. J. KLEEBE: J. Eur. Ceram. Soc., 1992, 10, 151–159.
- W.-H. GU and K. T. FABER: J. Am. Ceram. Soc., 1995, 78, 1507–1512.
- L. S. SIGL and H.-J. KLEEBE: J. Am. Ceram. Soc., 1995, 78, 2374–2380.
- L. S. SIGL: Acta Mater., 1996, 44, 3599–3609.
- K. T. FABER and A. G. EVANS: Acta Metall., 1983, 31, 565–576.
- H. LIU, K. L. WEISSKOPF, and G. PETZOW: J. Am. Ceram. Soc., 1989, 72, 559–563.
- S. G. SESHADRI, M. SRINIVASAN, and K. M. KEELER: Ceram. Eng. Sci. Proc., 1987, 8, 671–675.
- G. PEZZOTTI: Acta Metall. Mater., 1993, 41, 1825–1839.
- P. L. SWANSON, C. J. FAIRBANKS, B. R. LAWN, Y.-W. MAI, and B. J. HOCKEY: J. Am. Ceram. Soc., 1987, 70, 279–289.
- R. W. STEINBRECHT and O. SCHMENKEL: J. Am. Ceram. Soc., 1988, 71, C271.
- S. TANDOM and K. T. FABER: Acta Mater., 1998, 46, 3547–3555.
- J. ROEDEL: J. Eur. Ceram. Soc., 1992, 9, 323–334.
- S. J. BENNISON and B. R. LAWN: Acta Metall., 1989, 37, 2659–2671.
- P. F. BECHER, Ch.-H. HSUEH, P. ANGELINI, and T. N. TIEGS: J. Am. Ceram. Soc., 1988, 71, 1050–1061.
- C. W. LI and J. YAMANIS: Ceram. Eng. Sci. Proc., 1989, 10, 632–645.
- G. H. CAMPBELL, M. RUEHLE, B. J. DAGLEISH, and A. G. EVANS: J. Am. Ceram. Soc., 1990, 73, 521–530.
- R. W. STEINBRECH: J. Eur. Ceram. Soc., 1992, 10, 131–142.
- J. T. KRSTIC: Philos. Mag. A, 1983, A48, 695-708.
- L. S. SIGL, P. A. MATAGA, B. J. DALGLEISH, R. M. McMEEKING, and A. G. EVANS: Acta Metall., 1988, 36, 945–953.
- B. BUDIANSKY, J. W. HUTCHINSON, and J. C. LAMBROPOULOS: J. Mech. Phys. Solids, 1986, 34, 167–189.
- M. F. ASHBY, F. J. BLUNT, and M. BANNISTER: Acta Metall., 1989, 37, 847–857.
- T. KOSMAC, R. WAGNER, and N. CLAUSSEN: J. Am. Ceram. Soc., 1981, 64, C-72—C-73.
- R. H. DAUSKARDT, D. K. 'JEWS, and R. O. RITCHIE: J. Am. Ceram. Soc., 1989, 72, 1124–1130.
- D. B. MARSHALL and M. V. SWAIN: J. Am. Ceram. Soc., 1988, 71, 399–407.
- D. B. MARSHALL, M. C. SHAW, R. H. DAUSKART, R. O. RITCHIE, M. J. READEY, and A. H. HEUER: J. Am. Ceram. Soc., 1990, 73, 2659–2666.
- T. FETT, D. MUNZ, Ch.-T. YU, and A. S. KOBAYASHI: J. Am. Ceram. Soc., 1994, 77, 3267–3269.
- K. MORI and S. HASHIMURA: J. Am. Ceram. Soc., 1998, 81, 738–740.
- J. C. HAY and K. W. WHITE: J. Am. Ceram. Soc., 1993, 76, 1849–1854.
- R. KNEHANS and R. W. STEINBRECH: J. Mater. Sci. Lett., 1982, 1, 327–329.
- E. H. LUTZ and M. SAKAI: J. Am. Ceram. Soc., 1993, 76, 3113–3122.
- N. CLAUSSEN: in ‘Advances in ceramics, science and technology of zirconia II’, (ed. N. Claussen et al), 325-351; 1984, Columbus, OH, American Ceramics Society.
- N. CLAUSSEN: Mater. Sci. Eng., 1985, 71, 23–38.
- P. BECHER and W. H. WARWICK: J. Am. Ceram. Soc., 1994, 77, 2689–2692.
- W. H. GU, K. T. FABER, and R. W. STEINBRECH: Acta Metall., 1992, 40, 3121–3128.
- K. T. FABER, W. H. GU, H. CAI, R. A. WINHOLTZ, and D. J. MAGLEY: in ‘Toughening mechanisms in quasi-brittle materials’, 3–17; 1991, Dordrecht, Kluwer Academic Publishers.
- P. F. BECHER, Ch.-H. HSUEH, K. B. ALEXANDER, and E. Y. SUN: J. Am. Ceram. Soc., 1996, 79, 298–304.
- A. BELLOSI, Z. LENCES, and S. GUICCIARDI: Silic. Ind., 1995, 11-12, 321-331.
- G. PEZZOTTI, B.-T. LEE, K. HIRAKA, and T. NISHIDA: J. Mater. Sci., 1994, 29, 1786–1794.
- E. TANI, S. UMEBAYASHI, K. KISHI, and M. NISHIJIMA: Am. Ceram. Soc. Bull., 1986, 65, 1311–1315.
- s. R. clloi and J. A. SALEM: J. Am. Ceram. Soc., 1994, 77, 1042–1046.
- M. MITOMO, N. HIROSAKI, and H. HIROTSURU: MRS Bull., 1995, 20, 38–41.
- C. W. LI, D. J. LEE, and S. C. Loh J. Am. Ceram. Soc., 1992, 75, 1777–1785.
- T. OHJI, K. HIRAO, and S. KANZAKI: J. Am. Ceram. Soc., 1995, 78, 3125–3128.
- P. ‘gAJGALIK, J. DUSZA, and M. J. HOFFMANN: J. Am. Ceram. Soc., 1995, 78, 2619–2624.
- B.-J. clloi and H.-E. KIM: J. Am. Ceram. Soc., 1998, 81, 2191–2193.
- Y. S. CHOU and D. J. GREEN: J. Am. Ceram. Soc., 1993, 76, 1452–1458.
- M. C. CHU, S. SATO, Y. KOBAYASHI, and K. ANDO: Fatigue Fract. Eng. Mater. Struct., 1995, 18, 1019–1029.
- P. F. BECHER, E. Y. SUN, K. P. PLUCKNETT, K. B. ALEXANDER, Ch.-H. HSUEH, H.-T. LIN, S. B. WATERS, and C. G. WESTMORELAND: J. Am. Ceram. Soc., 1998, 81, 2821–2830.
- M. MITOMO and s. UENOSONO: J. Am. Ceram. Soc., 1992, 75, 103–108.
- T. KAWASHIMA, H. OKAMOTO, H. YAMAMOTO, and A. KITAMURA: J. Ceram. Soc. Jpn, 1991, 99, 1–6.
- N. KONDO, T. OHJI, and F. WAKAI: J. Am. Ceram. Soc., 1998, 81, 713–716.
- K. S. RAVICHANDRAN: Acta Metall. Mater., 1994, 42, 143–150.
- D. E. GARCIA, S. SCHICKER, R. JANSSEN, and N. CLAUSSEN: J. Eur. Ceram. Soc., 1998, 18, 601–605.
- O. SBAIZERO, G. PEZZOTTI, and T. NISHIDA: Acta Mater., 1998, 46, 681–687.
- P. F. BECHER, E. Y. SUN, C. H. HSUEH, K. P. PLUCKNETT, H. D. KIM, K. HIRAO, and M. E. BRITO: in ‘The science of engin-eering ceramics II’, (ed. K. Niihara et al), 285-291; 1998, Aedermannsdorf, Trans Tech Publications.
- M. Y. HE and J. W. HUTCHISON: Int. J. Solids Struct., 1989, 25, 1053–1066.
- I. M. PETERSON and T. Y. TIEN: J. Am. Ceram. Soc., 1995, 78, 2345–2352.
- P. F. BECHER, E. Y. SUN, Ch.-H. HSUEH, K. B. ALEXANDER, S. B. WATERS, and C. G. WESTMORELAND: Acta Mater., 1996, 44, 3881–3893.
- H. PARK, H.-E. KIM, and K. NIIHARA: J. Am. Ceram. Soc., 1997, 80, 750–756.
- G. PEZZOTTI and H.-J. KLEEBE: J. Eur. Ceram. Soc., 1999, 19, 451–455.
- X. PAN, J. MAYER, M. RUEHLE, and K. NIIHARA: J. Am. Ceram. Soc., 1996, 79, 585–590.
- D. S. CHEONG, K. T. HWANG, and C. S. KIM: in ‘The science of engineering ceramics II’, (ed. K. Niihara et al), 371-376; 1998, Aedermannsdorf, Trans Tech Publications.
- K. NIIHARA and A. NAKAHIRA: Ann. Chim. Fr., 1991, 16, 479–486.
- R. I. TODD: in ‘Sixth ECeRS: conference and exhibition of the European Ceramic Society: extended abstracts’, Br. Ceram. Proc. 60, Vol. 2, 21–22; 1999, London, IOM Communications.
- C. N. WALKER, C. E. BORSA, R. I. TODD, R. W. DAVIDGE, and R. J. BROOK: in ‘Novel synthesis and processing of ceramics’, Br. Ceram. Proc. 53, (ed. F. R. Sale), 249-264; 1994, London, The Institute of Materials.
- R. W. DAVIDGE, R. J. BROOK, F. CAMBIER, M. POORTEMAN, A. LERICHE, D. O'SULLIVAN, S. HAMPSHIRE, and T. KENNEDY: J. Eur. Ceram. Soc., 1996, 16, 799–802.
- F. MESCHKE, P. ALVES-RICCARDO, G. A. SCHNEIDER, and N. CLAUSSEN: J. Mater. Res., 1997, 12, 3307–3315.
- H. Z. WU, C. W. LAWRENCE, S. G. ROBERTS, and B. DERBY: Acta Mater., 1998, 11, 3839–3848.
- Y. XU, A. ZANGVIL, and A. KERBER: J. Eur. Ceram. Soc., 1997, 17, 921–928.
- M. WILHELM and W. WRUSS: cfilBer. DKG, 1998, 75, 40–44.
- M. STERNITZKE, B. DERBY, and R. BROOK: J. Am. Ceram. Soc., 1998, 81, 41–48.
- K. NIIHARA, K. IZAKI, and T. KAWAKAMI: J. Mater. Sci. Letter, 1990, 10, 112–114.
- K. NIIHARA, T. HIRANO, A. NAKAHIRA, and K. IZAKI: in ‘Grain boundary controlled properties of fine ceramics’, (ed. K. Ishizaki et al), 103-111; 1992, London, Elsevier Applied Science.
- G. PEZZOTTI and M. SAKAI: J. Am. Ceram. Soc., 1994, 77, 3039–3041.
- M. HERRMANN, Ch. SCHUBERT, A. RENDTEL, and H. HUEBNER: J. Am. Ceram. Soc., 1998, 81, 1095–1108.
- T. HIRANO and K. NIIHARA: Mater. Lett., 1995, 22, 249–254.
- A. SAWAGUSHI, K. TODA, and K. NIIHARA: J. Am. Ceram. Soc., 1991, 74, 1142–1144.
- J. PEREZ-RIGUEIRO, J. Y. PASTOR, J. LLORCA, M. ELICES, P. MIRANZO, and J. S. MOYA: Acta Mater., 1998, 46, 5399–5411.
- G. PEZZOTTI, T. NISHIDA, and M. SAKAI: J. Ceram. Soc. Jpn, 1995, 103, 901–909.
- T. OHJI, Y.-K. JEONG, Y.-H. CHOA, and K. NIIHARA: J. Am. Ceram. Soc., 1998, 81, 1453–1460.
- J. SELSING: J. Am. Ceram. Soc., 1961, 44, 419–419.
- I. LEVIN, W. D. KAPLAN, D. G. BRANDON, and A. A. LAYYOUS: J. Am. Ceram. Soc., 1995, 78, 254–256.
- J. ZHAO, L. C. STEARNS, M. P. HARMER, H. M. CHAN, G. A. MILLER, and R. E. COOK: J. Am. Ceram. Soc., 1993, 76, 503–510.
- A. M. THOMSON, H. M. CHAN, M. P. HARMER, and R. E. COOK: J. Am. Ceram. Soc., 1995, 78, 567–571.
- C. J. RUSSO, M. P. HARMER, H. M. CHAN, and G. A. MILLER: Ceram. Eng. Sci. Proc., 1993, 14, 998–1005.
- M. P. HARMER, H. M. CHAN, and G. A. MILLER: J. Am. Ceram. Soc., 1992, 75, 1715–1728.
- H. M. CHAN: Ann. Rev. Mater. Sci., 1997, 27, 249–282.
- D. B. MARSHALL, J. J. RATTO, and F. F. LANGE: J. Am. Ceram. Soc., 1991, 74, 2979–2987.
- D. B. MARSHALL: Ceram. Bull., 1992, 71, 969–973.
- T. CHARTIER, D. MERLE, and J. L. BESSON: J. Eur. Ceram. Soc., 1995, 15, 101–107.
- M. F. AMATEAU and G. L. MESSING: in ‘International encyclopedia of composites’, (ed. S. M. Lee), Vol. 3, 11–16; 1990, Weinheim, VCH Verlag.
- A. V. VIRKAR, J. L. HUANG, and R. A. CUTLER: J. Am. Ceram. Soc., 1987, 70, 164–170.
- H. WANG and x. Hu: J. Am. Ceram. Soc., 1996, 79, 553–556.
- J.-L. HUANG, F.-CH. CHOU, and H.-H. LU: J. Mater. Res., 1997, 12, 2357–2365.
- B.-J. CHOI, Y.-H. KOH, and H.-E. KIM: J. Am. Ceram. Soc., 1998, 81, 2725–2728.
- P. Z. CAI, D. J. GREEN, and G. L. MESSING: J. Eur. Ceram. Soc., 1998, 5, 2025–2034.
- O. PRAKASH, P. SARKAR, and P. S. NICHOLSON: J. Am. Ceram. Soc., 1995, 78, 1125–1127.
- J. SHE, S. SCHEPPOKAT, R. JANSSEN, and N. CLAUSSEN: J. Am. Ceram. Soc., 1998, 81, 1374–1376.
- J. J. HANSEN, R. A. CUTLER, D. K. SHETTY, and A. V. VIRKAR: J. Am. Ceram. Soc., 1988, 71, C501–505.
- W. J. CLEGG: Mater. Sci. Technol., 1998, 14, 483–495.
- A. J. PHILLIPPS, W. J. CLEGG, and T. W. CLYNE: Acta Metall. Mater, 1993, 41, 805–817.
- D. KOVAR, M. D. THOULESS, and J. W. HALLORAN: J. Am. Ceram. Soc., 1998, 81, 1004–1012.
- D.-H. KUO and W. M. KRIVEN: J. Am. Ceram. Soc., 1995, 78, 3121–3124.
- D.-H. KUO and W. M. KRIVEN: Mater. Sci. Eng., 1998, A241, 241-250.
- D. B. MARSHALL, P. E. D. MORGAN, and R. M. HOUSLEY: J. Am. Ceram. Soc., 1997, 80, 1677–1683.
- C. J. RUSSO, M. P. HARMER, H. M. CHAN, and G. A. MILLER: J. Am. Ceram. Soc., 1992, 75, 3396–3400.
- H. Liu, B. R. LAWN, and S. M. Hsu: J. Am. Ceram. Soc., 1996, 79, 634–640.
- B. R. LAWN, S. K. LEE, and K. S. LEE: in ‘The science of engineering ceramics II’, (ed. K. Niihara et al), 3-8; 1998, Aedermannsdorf, Trans Tech Publications.
- A. G. EVANS: Int. J. Fract., 1980, 16, 485–498.
- G. ROEBBEN, M. STEEN, J. BRESSERS, and O. VANDER BIEST: Prog. Mater. Sci., 1996, 40, 265–331.
- S. SURESH: ‘Fatigue of materials’; 1991, Cambridge, Cambridge University Press.
- R. H. DAUSKARDT: Acta Metall. Mater., 1993, 41, 2765–2781.
- R. H. DAUSKARDT, D. B. MARSHALL, and R. O. RITCHIE: J. Am. Ceram. Soc., 1990, 73, 893–903.
- G. GRATHWOHL and T. LIU: J. Am. Ceram. Soc., 1991, 74, 318–325.
- D. L. DAVIDSON, J. B. CAMPBELL, and J. LANKFORD: Acta Metall. Mater., 1991, 39, 1319–1330.
- J.-F. TSAI, J. D. BELNAP, and D. K. SHETTY: J. Am. Ceram. Soc., 1994, 77, 105–117.
- R. H. DAUSKARDT, W. C. CARTER, D. K. VEIRS, and R. O. RITCHIE: Acta Metall. Mater., 1990, 38, 2327–2336.
- M. HOFFMAN, Y.-W. MAI, S. WAKAYAMA, M. KAWAHARA, and T. KISHI: J. Am. Ceram. Soc., 1995, 78, 2801–2810.
- J.-F. TSAI and D. K. SHETTY: J. Am. Ceram. Soc., 1995, 78, 599–608.
- G. GRATHWOHL: Mater.-wiss. Werkstofftech., 1988, 19, 113–124.
- H. FREI and G. GRATHWOHL: cfilBer. DKG, 1991, 68, 27–35.
- F. GUIU, M. LI, and M. J. REECE: J. Am. Ceram. Soc., 1992, 75, 2976–2984.
- S. LATHABAI, Y.-W. MAI, and B. R. LAWN: J. Am. Ceram. Soc., 1989,72,1760–1761
- A. UENO, H. KISHIMOTO, and H. KAWAMOTO: in ‘Fracture mechanics of ceramics’, (ed. R. C. Bradt et al), Vol. 9, 423–438; 1992, New York, Plenum Press.
- H. KISHIMOTO, A. UENO, S. OKAWARA, and H. KAWAMOTO: J. Am. Ceram. Soc., 1994, 77, 1324–1328.
- K. URASHIMA, Y. TAJIMA, and M. WATANABE: in ‘Cyclic fatigue in ceramics’, (ed. H. Kishimoto et al), 83-100; 1995, Amsterdam, Elsevier Science/Japan Society of Materials Science.
- T. OGAWA: in ‘Fracture mechanics of ceramics’, (ed. R. C. Bradt et al), Vol. 9, 455–464; 1992, New York, Plenum Press.
- C. J. GILBERT, R. H. DAUSKARDT, and R. O. RITCHIE: Ceram. Int., 1997, 23, 413–418.
- A. OTSUKA, T. MIYATA, H. SUGAWARA, S.-K. YOO, and T. SUZUKI: in ‘Cyclic fatigue in ceramics’, (ed. H. Kishimoto et al), 139-166; 1995, Amsterdam, Elsevier Science/Japan Society of Materials Science.
- G. CHOI: Acta Metall. Mater., 1995, 43, 1489–1494.
- C. J. GILBERT, J. J. CAO, W. J. MOBERLYCHAN, L. C. DEJONGHE, and R. O. RITCHIE: Acta Metall. Mater., 1996, 44, 3199–3214.
- M. J. REECE, F. GUIU, and M. F. R. SAMUR: J. Am. Ceram. Soc., 1989, 72, 348–352.
- C. J. GILBERT, R. H. DAUSKARDT, and R. O. RITCHIE: J. Am. Ceram. Soc., 1995, 78, 2291–300.
- D. S. JACOBS and I.-W. CHEN: J. Am. Ceram. Soc., 1995, 78, 513–520.
- D. S. JACOBS and I.-W. CHEN: J. Am. Ceram. Soc., 1994, 77, 1153–1161.
- R. MATT and G. GRATTIWOHL: in ‘Fracture mechanics of cer-amics’, (ed. R. C. Bradt et al), Vol. 12, 77–92; 1996, New York, Plenum Press.
- T. KAWAKUBO: in ‘Cyclic fatigue in ceramics’, (ed. H. Kishimoto et al), 83-100; 1995, Amsterdam, Elsevier Science/Japan Society of Materials Science.
- S. H. KNICKERBOCKER, A. ZANGVIL, and S. D. BROWN: J. Am. Ceram. Soc., 1984, 67, 365–368.
- Y. MUTOH, N. MIYAHARA, K. YAMAISHI, and T. OIKAWA: Trans. ASME, 1993, 115, 268–272.
- U. RAMAMURTY, T. HANSSON, and S. SURESH: J. Am. Ceram. Soc., 1994, 77, 2985–2999.
- N. KOKLER, Y. IKUHARA, H. AWAJI, and K. FUNATANI: in ‘Fracture mechanics of ceramics’, (ed. R. C. Brandt et al), Vol. 10, 367–375; 1992, New York, Plenum Press.
- P. F. BECHER and T. N. TIEGS: Adv. Ceram. Mater., 1988, 3, 148–153.
- H. PETERLIK and K. KROMP: J. Mater. Sci., 1993, 28, 4341–4346.
- CHEN, S.-Y. LIU, and D. JACOBS: Acta Metall. Mater., 1995,43, 1439–1446.
- J. DUSZA, P. GAJGALIK, and M. STEEN: J. Am. Ceram. Soc., Dec. 1999, 82, in press.
- K. NIIHARA, K. IZAKI, and T. KAWAKAMI: J. Mater. Sci. Lett., 1991, 10, 112–114.
- S. T. BULJAN, A. E. PASTO, and H. J. KIM: Ceram. Bull., 1989, 68, 387–394.
- G. D. QUINN and W. R. BRAUE: J. Mater. Sci., 1990, 25, 4377–4392.
- T. OHJI, Y. GOTO, and A. TSUGE: J. Am. Ceram. Soc., 1991, 74, 739–745.
- G. C. WEI and P. F. BECHER: J. Am. Ceram. Soc., 1984, 67, 571–574.
- M. K. CINIBULK, G. THOMAS, and S. M. JOHNSON: J. Am. Ceram. Soc., 1990, 73, 1606–1612.
- H. PARK, H.-E. xim, and K. NIIHARA: J. Am. Ceram. Soc., 1997, 80, 750–756.
- H. PARK, H.-E. KIM, and K. NIIHARA: J. Eur. Ceram. Soc., 1998, 18, 907–914.
- M. JIMENEZ-MELENDO, C. CLAUSS, and A. DOMINGUEZ-RODRIG-UEZ: J. Am. Ceram. Soc., 1997, 80, 2126–2130.
- M. JIMENEZ-MELENDO, C. CLAUSS, A. DOMINGUEZ-RODRIGUEZ, G. DE PORTU, E. RONCARI, and P. PINASCO: Acta Mater., 1998, 46, 3995–4004.
- T. FETT and D. MUNZ: Proc. Advanced Materials Science and Engineering Society Conf. on ‘Reliability of structural cer-amics’, Tokyo, Japan, 1987.
- M. G. JENKINS, M. K. FERBER, and C.-K. LIN: J. Am. Ceram. Soc., 1993, 76, 788–792.
- M. G. JENKINS, M. K. FERBER, and C.-K. LIN: J. Mater. Sci., 1993, 12, 1940–1944.
- D. BOLSCH and J. BRESSERS: Proc. 1st European Ceramic Society Conf., (ed. D. de With et al), Maastricht, The Netherlands, 1990, Vol. 3, 205–209.
- L. EWART and S. SURESH: J. Mater. Sci., 1992, 27, 5181–5191.
- C.-K. LIN, D. F. SICIE, Y. XU, and A. ZANGVIL: J. Am. Ceram. Soc., 1992, 75, 637–648.
- Y. H. ZHANG and L. EDWARDS: Mater. Sci. Eng., 1998, A256, 144-151.
- T. HANSSON, Y. MIYASHITA, and Y. MUTOH: in `Fracture mech-anics of ceramics', (ed. R. C. Bradt et al), Vol. 12, 187–203; 1996, New York, Plenum Press.
- G. PEZZOTTI, Y. OKAMOTO, T. NISHIDA, and M. SAKAI: Acta Metall. Mater., 1995, 43, 1323–1334.
- J. DUSZA and P. gAJGALIK: J. Mater. Sci. Lett., 1994, 13, 131–134.
- Y. H. ZHANG, L. EDWARDS, and W. J. PLUMBRIDGE: Acta Mater., 1998, 46, 1327–1332.
- S.-Y. LIU, I.-W. CHEN, and T.-Y. TEN: J. Am. Ceram. Soc., 1994, 77, 137–142.
- K. S. CHAN and R. A. PAGE: J. Am. Ceram. Soc., 1993, 76, 803–826.
- A. HYNES and R. DOREMUS: Grit. Rev. Solid State Mater. Sci., 1996, 21, 129–187.
- D. S. WILKINSON: J. Am. Ceram. Soc., 1998, 81, 275–299.
- B. J. DALGLEISH, E. B. SLAMOVICH, and A. G. EVANS: J. Am. Ceram. Soc., 1985, 68, 575–581.
- A. K. CHOKSHI and J. R. PORTER: J. Mater. Sci., 1986, 21, 705–710.
- A. G. ROBERTSON, D. S. WILKINSON, and C. H. CACERES: J. Am. Ceram. Soc., 1991, 74, 1043–1058.
- I.-W. CHEN and L. A. XUE: J. Am. Ceram. Soc., 1990, 73, 2585–2609.
- A. H. CHOKSHI: J. Mater. Sci., 1990, 25, 3221–3228.
- C. R. BLANCHARD and R. A. PAGE: J. Am. Ceram. Soc., 1992, 75, 1612–1220.
- C. BLANCHARD, H.-T. LIN, and P. F. BECHER: J. Am. Ceram. Soc., 1998, 81, 1429–1436.
- H.-T. LIN and P. F. BECHER: J. Am. Ceram. Soc., 1990, 73, 1378–1381.
- A. R. D. ARELLANO-LOPEZ, F. L. CUMBERA, A. DOMINGUEZ-RODRIGUEZ, K. C. GORETTA, and J. L. ROUTBORT: J. Am. Ceram. Soc., 1990, 73, 1297–1300.
- A. R. D. ARELLANO-LOPEZ, A. DOMINGUEZ-RODRIGUEZ, K. C. GORETTA, and J. L. ROUTBORT: J. Am. Ceram. Soc., 1993, 76, 1425–1432.
- P. LIPETZKY, S. R. NUTT, D. A. KOESTER, and R. F. DAVIS: J. Am. Ceram. Soc., 1991, 74, 1240–1247.
- K. XIA and T. G. LANGDON: Acta Metall. Mater., 1995, 43, 1421–1427.
- H.-T. LIN, K. B. ALEXANDER, and P. F. BECHER: J. Am. Ceram. Soc., 1996, 79, 1530–1536.
- A. H. SWAN, M. V. SWAIN, and G. L. DUNLOP: J. Eur. Ceram. Soc., 1992, 10, 317–326.
- R. HAM-SU: ‘Creep of silicon carbide-reinforced alumina’, PhD dissertation, McMaster University, Hamilton, Canada, 1997.
- M. M. CHADWICK, R. S. JUPP, and D. S. WILKINSON: J. Am. Ceram. Soc., 1993, 76, 376–384.
- J. A. TODD and Z. xu: J. Mater. Sci., 1989, 24, 4443–4452.
- M. N. MENON, H. T. FANG, D. C. WU, M. G. JENKINS, M. K. FERBER, K. L. MORE, C. L. HUBBARD, and T. A. NOLAN: J. Am. Ceram. Soc., 1994, 77, 1217–1227.
- Y. TAJAMA, K. MIZUMO, K. MATSUBARA, and M. WATANABLE: in ‘Key engineering materials’, Vols. 89-91, ‘Silicon nitride '93’, (ed. M. J. Hoffmann et al), 443-450; 1994, Aedermannsdorf, Trans Tech Publishing.
- M. N. MENON, H. T. FANG, D. C. WU, M. G. JENKINS, and M. K. FERBER: J. Am. Ceram. Soc., 1994, 77, 1235–1241.
- D. C. CRANMER, B. J. HOCKEY, and S. M. WIEDERHORN: Ceram. Eng. Sci. Proc., 1991, 12, 1862–1872.
- W. LUECKE, S. M. WIEDERHORN, B. J. HOCKEY, and G. G. LONG: in ‘Silicon nitride ceramics: scientific and technological advances’, MRS Proc. 287, (ed. I.-W. Chen et al), 467-472; 1993, Pittsburg, PA, Materials Research Society.
- W. LUECKE and S. M. WIEDERHORN: in ‘Key engineering mater-ials’, Vols. 89-91, ‘Silicon nitride '93’, (ed. M. J. Hoffmann et al), 587-591; 1994, Aedermannsdorf, Trans Tech Publications.
- D. S. WILKINSON: in `Tailoring of high-temperature properties of Si3N4 ceramics', (ed. M. J. Hoffmann and G. Petzow), 327-338; 1994, Dordrecht, Kluwer Academic Publishers.
- Q. JIN, D. S. WILKINSON, and G. C. WEATHERLY: J. Am. Ceram. Soc., 1996, 79, 211–214.
- S. M. WIEDERHORN, B. J. HOCKEY, D. C. CRANMER, and R. YECKLEY: J. Mater. Sci., 1993, 28, 445–453.
- W. E. LUECKE, S. M. WIEDERHORN, B. J. HOCKEY, R. E. KRAUSE, Jr, and G. G. LONG: J. Am. Ceram. Soc., 1995, 78, 2085–2096.
- F. LOFAJ, A. OKADA, and H. KAWAMOTO: J. Am. Ceram. Soc., 1997, 80, 1619–1623.
- A. A. WERESZCZAK, M. K. FERBER, T. P. KIRKLAND, A. S. BARNES, E. L. FROME, and M. N. MENON: J. Eur. Ceram. Soc., 1999, 19, 227–237.
- A. A. WERESZCZAK, T. P. KIRKLAND, M. K. FERBER, T. R. WATKINS, and R. L. YECKEY: J. Mater. Sci., 1998, 33, 2053–2060.
- G. PEZZOTTI, H.-J. KLEEBE, K. OTA, and K. YABUTA: J. Am. Ceram. Soc., 1997, 80, 2349–2354.
- F. LOFAJ, A. OKADA, H. USAMI, and H. KAWAMOTO: J. Am. Ceram. Soc., 1999, 82, 1009–1019.
- R. F. KRAUSE, Jr, W. E. LUECKE, J. D. FRENCH, B. J. HOCKEY, and S. M. WIEDERHORN: J. Am. Ceram. Soc., 1999, 82, 1233–1241.
- M. K. FERBER, M. G. JENKINS, T. A. NOLAN, and R. L. YECKLEY: J. Am. Ceram. Soc., 1994, 77, 657–665.
- C. WOLF and H. III EBNER: in ‘Fracture mechanics of ceramics’, (ed. R. C. Bradt et al), Vol. 12, 499–514; 1996, New York, Plenum Publishing.
- T. OHJI and Y. YAMAUCHI: J. Am. Ceram. Soc., 1993, 76, 3105–3512.
- S. ZHU, M. MIZUMO, Y. KAGAWA, and H. KAYA: J. Mater. Sci., 1999, 34, 1799–1807.
- S. M. WIEDERHORN, D. E. ROBERTS, T.-J. CHUANG, and L. CHUCK: J. Am. Ceram. Soc., 1988, 71, 602–608.
- D. F. CAROLL and R. E. TRESSLER: J. Am. Ceram. Soc., 1988, 71, 472–477.
- B. A. FIELDS and S. M. WIEDERHORN: J. Am. Ceram. Soc., 1996, 79, 977–986.
- A. NAKAHIRA and K. NIIHARA: Proc. 95th Annual Meeting of American Ceramic Society, Cincinnatti, OH, USA, April 1993, Paper SXIV-26-93.
- T. OHJI, A. NAKAHIRA, T. HIRANO, and K. NIIHARA: J. Am. Ceram. Soc., 1994, 77, 3529–3562.
- A. M. THOMSON, H. M. CHAN, and M. P. HARMER: J. Am. Ceram. Soc., 1997, 80, 2221–2228.
- T. OHJI, T. KUSTJNOSE, and K. NIIHARA: J. Am. Ceram. Soc., 1998, 81, 2713–2716.
- M. F. ASHBY: Scr. Metall., 1969, 3, 837–842.
- J.-L. BESSON, M. MAYNE, D. BAHLOUL-HOURLIER, and P. GOURSAT: J. Eur. Ceram. Soc., 1998, 18, 1893–1904.
- A. RENDTEL, H. HUEBNER, M. HERRMANN, and C. SCHUBERT: J. Am. Ceram. Soc., 1998, 81, 1109–1120.
- Y. G. GOGOTSI and G. GRATHWOHL: J. Am. Ceram. Soc., 1993, 76, 3093–3104.
- A. A. WERESZCZAK, K. BREDER, and M. K. FERBER: J. Am. Ceram. Soc., 1993, 76, 2919–2922.
- A. A. WERESZCZAK, M. K. FERBER, T. P. KIRKLAND, K. L. MORE, M. R. FOLEY, and R. L. YECKLEY: J. Am. Ceram. Soc., 1995, 78, 2129–2140.
- P. RENDTEL, A. RENDTEL, H. HUEBNER, H. KLEIVIM, and M. HERRMANN: J. Am. Ceram. Soc., 1999, 19, 217–226.
- N. S. JACOBSON: J. Am. Ceram. Soc., 1993, 76, 3–28.
- D. S. FOX and J. L. SMIALEK: J. Am. Ceram. Soc., 1990, 73, 303–311.
- D. S. FOX, M. D. CUY, and T. E. STRANGMAN: J. Am. Ceram. Soc., 1997, 80, 2798–2804.
- D. J. BAXTER, T. GRAZIANI, P. MORETTO, and V. BIASINI: J. Mater. Sci. Lett., 1993, 12, 1533–1535.
- T. GRAZIANI, D. BAXTER, and A. BELLOSI: J. Mater. Sci., 1997, 32, 1631–1637.
- M. CARRUTH, D. BAXTER, and J. DUSZA: J. Mater. Sci., 1999, 34, 4501–4509.
- M. HOFFMAN: `Mechanische eigenschaften von heissgepresstem siliziumnitrid unter den bedingungen einer simulierten kohlevergasung', dissertation, Institut fur Struktur- und Funktionskeramik, Montanuniversität Leoben, Leoben, Austria, 1996.
- M. F. ASHBY, C. CANDHI, and D. M. R. TAPLIN: Acta Metall., 1979, 27, 699–729.
- G. D. QUINN: in ‘Ceramic materials and components for engines’, (ed. W. Bunk and H. Hausner), 931-939; 1986, Bad Honnef, Verlag Deutsche Keramische Gesellschaft.
- M. MATSUI, Y. ISHIDA, T. SOMA, and I. ODA: in ‘Ceramic materials and components for engines’, (ed. W. Bunk and H. Hausner), 1043-1050; 1986, Bad Honnef, Verlag Deutsche Keramische Gesellschaft.
- S. M. WIEDERHORN, G. D. QUINN, and R. KRAUSE, Jr: in ‘Key engineering materials’, Vols. 89-91, ‘Silicon nitride '93’, (ed. M. J. Hoffmann et al), 575-580; 1994, Aedermannsdorf, Trans Tech Publications.
- S. M. WIEDERHORN, W. E. LUECKE, and R. F. KRAUSE, Jr: Ceram. Eng. Sci. Proc., 1998, 19, 65–78.