References
- Wright IG and Dooley RB: ‘A review of the oxidation behaviour of structural alloys in steam’, Int. Mater. Rev., 2010, 55, 129–167.
- Aguero A and Muelas R: ‘Steam oxidation of slurry aluminide coatings on ferritic steels for advanced coal-fired steam power plants’, Mater. Sci. Forum, 2004, 461–464, 957–964.
- I. G. Wright, P. F. Tortorelli and M. Schutze: ‘Oxide growth and exfoliation on alloys exposed to steam’, EPRI report no. 1013666, 2007, Palo Alto, CA.
- Metsajoki J, Huttunen-saarivirta E and Lepisto T: ‘Oxidation of uncoated and aluminized 9–12%Cr boiler steels at 550–650°C’, J. Mater. Eng. Perform., 2010, 20, 298–305.
- Aguero A, Muelas R, Pastor A and Osgerby S: ‘Long exposure steam oxidation testing and mechanical properties of slurry aluminide coatings for steam turbine components’, Surf. Coat. Technol., 2005, 200, 1219–1224.
- Pint BA and Zhang Y: ‘Performance of Al-rich oxidation resistant coatings for Fe-based alloys’, Mater. Corros., 2011, 62, 549–560.
- Bates BL, Wang YQ, Zhang Y and Pint BA: ‘Formation and oxidation performance of low-temperature pack aluminide coatings on ferritic-martensitic steels’, Surf. Coat. Technol., 2009, 204, 766–770.
- Wang CJ and Badaruddin M: ‘The dependence of high temperature resistance of aluminized steel exposed to water-vapour oxidation’, Surf. Coat. Technol., 2010, 205, 1200–1205.
- Durham RN, Singheiser L and Quadakkers WJ: ‘Identification of degrdation mechanisms in coatings for supercritical steam applications’, Mater. Corros., 2008, 59, 402–408.
- Agüero A, González V, Gutiérrez M, Knödler R, Muelas R and Straub S: ‘Comparison between field and laboratory steam oxidation testing on aluminide coatings on P92’, Mater. Corros., 2011, 62, 561–568.
- Knyazev EV, Voshedchenko BM and Voskreseskii YA: ‘Structure and phase composition of an aluminized layer after heat treatment’, Met. Sci. Heat Treat., 1983, 25, 117–119.
- Deqing W: ‘Phase evolution of an aluminized steel by oxidation treatment’, Appl. Surf. Sci., 2008, 254, 3026–3032.
- Danzo II, Verbeken K and Houbaert Y: ‘Microstructure of hot dip coated Fe–Si steels’, Thin Solid Films, 2011, 520, 1638–1644.
- Zandrahimi M, Vatandoost J and Ebrahimifar H: ‘Pack cementation coatings for high-temperature oxidation resistance of AISI 304 stainless steel’, J. Mater. Eng. Perform., 2012, 21, 2074–2078.
- Huttunen-Saarivirta E, Honkanen SA, Tsipas SA, Omar H and Tsipas D: ‘Microstructure and elevated-temperature erosion-oxidation behaviour of aluminized 9Cr-1Mo steel’, App. Surf. Sci., 2012, 259, 674–684.
- Jo TS, Kim SH and Kim YD: ‘Microstructural changes of aluminized Alloy 617 during high-temperature aging’, Surf. Coat. Technol., 2012, 205, 4743–4749.
- Agüero A, Gutiérrez M and González V: ‘Deposition process of slurry iron aluminide coatings’, Mater. High Temp., 2008, 25, 257–265.