Effect of surface conditions on internal oxidation and nitridation of HVOF MCrAlY coatings

References

• Evans AG, Mumm DR, Hutchinson JW, Meier GH and Pettit FS: ‘Mechanisms controlling the durability of thermal barrier coatings’, Progress Mater. Sci., 2001, 46, 505–553.
   Web of Science ®Google Scholar
• Miller RA: ‘Thermal barrier coatings for aircraft engines: History and directions’, J. Thermal Spray Technol., 1997, 6, (1), 35–42.
   Web of Science ®Google Scholar
• Rabiei A and Evans AG: ‘Failure mechanisms associated with the theramlly grown oxide in plasma-sprayed thermal barrier coatings’, Acta Mater., 2000, 48, 3963–3976.
   Web of Science ®Google Scholar
• Shillington EAG and Clarke DR: ‘Spalling failure of a thermal barrier coating associated with aluminum depletion in the bond-coat’, Acta Mater., 1999, 47, (4), 1297–1305.
   Web of Science ®Google Scholar
• Brandl W, Grabke HJ, Toma D and Kruger J: ‘The oxidation behaviour of sprayed MCrAlY coatings’, Surf. Coat. Technol., 1996, 86, (1–3), 41–47.
   Web of Science ®Google Scholar
• Gil A, Shemet V, Vassen R, Subanovic M, Toscano J, Naumenko D, Singheiser L and Quadakkers WJ: ‘Effect of surface condition on the oxidation behaviour of MCrAlY coatings’, Surf. Coat. Technol., 2006, 201, (7), p. 3824–3828.
   Web of Science ®Google Scholar
• Tang F, Ajdelsztajn L, Kim GE, Provenzano V and Schoenung JM: ‘Effects of surface oxidation during HVOF processing on the primary stage oxidation of a CoNiCrAlY coating’, Surf. Coat. Technol., 2004, 185, 228–233.
   Web of Science ®Google Scholar
• Nickel H, Clemens D, Quadakkers WJ and Singheiser L: ‘Development of NiCrAlY alloys for corrosion-resistant coatings and thermal barrier coatings of gas turbine components’, J. Pressure Vessel Technol. Trans. ASME, 1999, 121, (4), 384–387.
   Web of Science ®Google Scholar
• Tolpygo VK, Murphy KS and Clarke DR: ‘Effect of Hf, Y and C in the underlying superalloy on the rumpling of diffusion aluminide coatings’, Acta Mater., 2008, 56, (3), 489–499.
   Web of Science ®Google Scholar
• Tolpygo VK, Clarke DR and Murphy KS: ‘The effect of grit blasting on the oxidation behavior of a platinum-modified nickel-aluminide coating’, Metall. Mater. Trans. A-Phys. Metall. Mater. Sci., 2001, 32, (6), 1467–1478.
   Web of Science ®Google Scholar
• Duhamel C, Chieux M, Molins R, Remy L, Monceau D, Vande Put A and Guedou J.-Y: ‘Thermal cycling behaviour of thermal barrier coating systems based on first- and fourth-generation Ni-based superalloys’, Mater. High Temper., 2012, 29, (2), 136–144.
   Web of Science ®Google Scholar
• Pint BA and Unocic KA: ‘Ionic segregation on grain boundaries in thermally grown alumina scales’, Mater. High Temper., 2012, 29, (3), 257–263.
   Web of Science ®Google Scholar
• Saeidi S: ‘Microstructure, oxidation & mechanical properties of as-sprayed and annealed HVOF & VPS CoNiCrAlY coatings’, in ‘Faculty of engineering’; 2010, Nottingham, The University of Nottingham.
   Google Scholar
• Saeidi S, Voisey KT and McCartney DG: ‘Mechanical properties and microstructure of VPS and HVOF CoNiCrAlY coatings’, J. Thermal Spray Technol., 2011, 20, (6), 1231–1243.
   Web of Science ®Google Scholar
• Kuroda S, Dendo T and Kitahara S: ‘Quenching stress in plasma-sprayed coatings and its correlation with the deposit microstructure’, J. Thermal Spray Technol., 1995, 4, (1), 75–84.
   Web of Science ®Google Scholar
• Matejicek J and Sampath S: ‘In situ measurement of residual stresses and elastic moduli in thermal sprayed coatings - Part 1: apparatus and analysis’, Acta Mater., 2003, 51, (3), 863–872.
   Web of Science ®Google Scholar
• Santana YY, La Barbera-Sosa JG, Staia MH, Lesage J, Puchi-Cabrera ES, Chicot D and Bemporad E: ‘Measurement of residual stress in thermal spray coatings by the incremental hole drilling method’, Surf. Coat. Technol., 2006, 201, (5), 2092–2098.
   Web of Science ®Google Scholar
• Itoh Y, Saitoh M and Tamura M: ‘Characteristics of MCrAIY coatings sprayed by high velocity oxygen-fuel spraying system’, J. Eng. Gas Turbines Power Trans. ASME, 2000, 122, (1), 43–49.
   Web of Science ®Google Scholar
• Krupp U and Christ HJ: ‘Internal nitridation of nickel-base alloys. Part I. Behavior of binary and ternary alloys of the Ni-Cr-Al-Ti system’, Oxid. Met., 1999, 52, (3–4), 277–298.
   Web of Science ®Google Scholar
• Litz J, Rahmel A and Schorr M: ‘Selective carbide oxidation and internal nitridation of the Ni-base superalloys IN-738-LC and IN-939 in air’, Oxid. Met., 1988, 30, (1–2), 95–105.
   Web of Science ®Google Scholar