Y₂SiO₅ environmental barrier coatings for niobium silicide based materials

References

• Bewlay BP, Jackson MR, Zhao J.-C and Subramanian PR: ‘A review of very-high-temperature Nb-silicide-based composites’, Metall. Mater. Trans. A, 2003, 34A, 2043–2052.
   Web of Science ®Google Scholar
• Chan KS: ‘Cyclic-oxidation resistance of niobium-base in situ composites: modelling and experimentation’, Oxid. Met., 2004, 61, 165–194.
   Web of Science ®Google Scholar
• Vilasi M, Francois M, Podor R and Steinmetz J: ‘New silicides for new niobium protective coatings’, J. Alloys Compd, 1998, 264, 244–251.
   Web of Science ®Google Scholar
• Knittel S, Mathieu S, Portebois L, Drawin S and Vilasi M: ‘Development of silicide coatings to ensure the protection of Nb and silicide composites against high temperature oxidation’, Surf. Coat. Technol., 2013, 235, 401–406.
   Web of Science ®Google Scholar
• Portebois L, Mathieu S, Knittel S, Aranda L and Vilasi M: ‘Protective coatings for niobium alloys: manufacture, characterisation and oxidation behaviour of (TiXCr)7Si6 with X  =  Fe, Co, Ni’, Oxid. Met., 2013, 80, 243–255.
   Web of Science ®Google Scholar
• Opila E: ‘Water vapor effect on the volatility of borides, silicides, and aluminides for refractory alloys coating’, Mater. Sci. Technol. 2011 Conf. & Exhib., Columbus, OH, USA, October 2011, TMS, 1054–1067.
   Google Scholar
• Graham HC and Davis H: ‘Oxidation/vaporization kinetics of Cr2O3’, J. Am. Ceram. Soc., 1971, 54, 89–93.
   Web of Science ®Google Scholar
• Opila EJ, Jacobson NS, Myers DL and Copland EH: ‘Predicting oxides stability in high-temperature water vapor’, JOM, 2006, 58, (1), 22–28.
   Web of Science ®Google Scholar
• Lee KN: ‘Current status of environmental barrier coatings for Si-based ceramics’, Surf. Coat. Technol., 2000, 133–134, 1–7.
   Web of Science ®Google Scholar
• Lee N, Fox DS and Bansal NP: ‘Rare earth silicate environmental barrier coatings for SiC/SiC composites and Si3N4 ceramics’, J. Eur. Ceram. Soc., 2005, 25, 1705–1715.
   Web of Science ®Google Scholar
• Argirusis C, Damjanovic T and Borchardt G: ‘Yttrium silicate coating system for oxidation protection of C/C-Si-SiC composites: electrophoretic deposition and oxygen self-diffusion measurements’, J. Eur. Ceram. Soc., 2007, 27, 1303–1306.
   Web of Science ®Google Scholar
• Courcot E, Rebillat F, Teyssandier F and Louchet-Pouillerie C: ‘Thermochemical stability of the Y2O3-SiO2 system’, J. Eur. Ceram. Soc., 2010, 30, 905–910.
   Web of Science ®Google Scholar
• Sun Z, Li M and Zhou Y: ‘Thermal properties of single-phase Y2SiO5’, J. Eur. Ceram. Soc., 2009, 29, 551–557.
   Web of Science ®Google Scholar
• Bewlay BP, Jackson MR and Lipsitt HA: ‘The balance of mechanical and environmental properties of a mulitelement niobium-niobium silicide-based in situ composite’, Metall. Mater. Trans. A, 1996, 27A, 3801–3808.
   Web of Science ®Google Scholar
• Schmücker M, Mechnich P, Zaefferer S and Schneider H: ‘The high-temperature mullite/α-alumina conversion in rapidly flowing water vapor’, Scr. Mater., 2006, 55, 1131–1134.
   Web of Science ®Google Scholar
• Opila EJ: ‘Oxidation and volatilization of silica formers in water vapor’, J. Am. Ceram. Soc., 2003, 86, 1238–2747.
   Web of Science ®Google Scholar
• Eaton HE and Linsey GD: ‘Accelerated oxidation of SiC CMC’s by water vapor and protection via environmental barrier coating approach’, J. Eur. Ceram. Soc., 2002, 22, 2741–1715.
   Web of Science ®Google Scholar
• Ueno S, Jayaseelan DD and Ohji T: ‘Development of oxide-based EBC for silicon nitride’, Int. J. Appl. Ceram. Technol., 2004, 1, 363–373.
   Web of Science ®Google Scholar
• Aparicio M and Duran A: ‘Yttrium silicate coatings for oxidation protection of carbon-silicon carbide composites’, J. Am. Ceram. Soc., 2000, 83, 1351–1355.
   Web of Science ®Google Scholar
• Klemm H: ‘Silicon nitride for high-temperature applications’, J. Am. Ceram. Soc., 2010, 93, 1501–1522.
   Web of Science ®Google Scholar
• Eils N, Rüscher CH, Mechnich P, Schmücker M and Schneider H: ‘Water vapor corrosion of mullite, 15. Jahrestagung der Deutschen Gesellschaft für Kristallographie, Bremen, Germany, March 2007, Deutsche Gesellschaft für Kristallographie.
   Google Scholar
• Eils NK: ‘Hochtemperaturverhalten von Mullit in unterschiedlichen Atmosphären: Wasserdampfkorrosion und Diffusionsprozesse’, Dissertation, Universität, Hannover, 2008.
   Google Scholar
• Wang J, Tian S, Li G, Liao F and Jing Y: ‘Preparation and X-ray characterization of low-temperature phases of R2SiO5 (R = rare earth elements)’, Mater. Res. Bull., 2001, 36, 1855–1861.
   Web of Science ®Google Scholar
• Garcia E, Miranzo P and Osendi MI: ‘The prospect of Y2SiO5-based materials as protective layer in environmental barrier coatings’, J. Therm. Spray Technol., 2013, 22, 680–689.
   Web of Science ®Google Scholar
• Ueno S, Ohji T and Lin H.-T: ‘Designing lutetium silicate environmental barrier coatings for silicon nitride and its recession behavior in steam jets’, J. Ceram. Process. Res., 2006, 7, 20–23.
   Web of Science ®Google Scholar
• Ueno S, Ohji T and Lin H.-T: ‘Recession behavior of Yb2Si2O7 phase under high speed steam jet at high temperature’, Corros. Sci., 2008, 50, 178–182.
   Web of Science ®Google Scholar
• Mechnich P, Lange A, Braun R and Büttner C: ‘Corrigendum to “Y2SiO5 coatings fabricated by RF magnetron sputtering” [Surf. Coat. Technol. (2013)]’, Surf. Coat. Technol., 2014, 242, 252.
   Web of Science ®Google Scholar