References
- S. J. Kim, C. G. Lee, I. Choi and S. Lee: Metall. Mater. Trans. A, 2001, 32A, 505–514.
- M. D. Tumuluru: Weld. J., 2007, 86, 31–37.
- M. Pouranvari, A. Abedi, P. Marashi and M. Goodarzi: Sci. Technol. Weld. Join., 2008, 13, 39–43.
- X. Sun, E. V. Stephens and M. A. Khaleel: Eng. Fail. Anal., 2008, 15, 356–367.
- M. Pouranvari, H. R. Asgari, S. M. Mosavizadeh, P. H. Marashi and M. Goodarzi: Sci. Technol. Weld. Join., 2007, 12, 217–225.
- S. Zuniga and S. D. Sheppard: in ‘Fatigue and fracture mechanics’, Vol. 27, ASTM STP 1296, (ed. R. S. Piascik et al.), 469–489; 1997, Philadelphia, USA, ASTM.
- M. Marya, K. Wang, L. G. Hector and X. Gayden: J. Manuf. Sci. Eng., 2006, 287–298.
- S. M. Zuniga: ‘Predicting overload pull-out failures in resistance spot welded’, PhD thesis, Stanford University, Palo Alto, CA, 1994.
- H. Lee, N. Kim and T. S. Lee: Eng. Fract. Mech., 2005, 72, 1203–1221.
- Z. Han and J. E. Indacochea: J. Mater. Eng. Perform., 1993, 2, 437–444.
- M. Goodarzi, S. P. H. Marashi and M. Pouranvari: J. Mater. Process. Technol., 2009, 209, 4379–4384.
- M. Marya and X. Q. Gayden: Weld. J., 2005, 84, 172s–182s.
- M. Marya and X. Q. Gayden: Weld J., 2005, 84, 197s–204s.
- M. I Khan, M. L. Kuntz, P. Su, A. Gerlich, T. North and Y. Zhou: Sci. Technol. Weld. Join., 2007, 12, 175–182.
- C. Ma, S. D. Bhole, D. L. Chen, A. Lee, E. Biro and G. Boudreau: Sci. Technol. Weld. Join., 2006, 11, 480–487.
- C. Ma, D. L. Chen, S. D. Bhole, G. Boudreau, A. Lee and E. Biro: Mater. Sci. Eng. A, 2008, A485, 334–346.
- E. Pakalnins and T. Morrisette: ‘Comparative resistance spot weld characterization of 600 MPa dual-phase steels using DOE analysis’, Proc. 11th Int. Conf. on ‘Sheet metal welding’, Livonia, MI, May 2004, AWS, Paper 1–3.
- ‘Specification for metal-arc welding of carbon and carbon manganese steels’, BS5135, British Standard Institute, London, 1974.
- ‘Recommended practices for test methods and evaluation the resistance spot welding behavior of automotive sheet steels’, ANSI/AWS/SAE D8·9–97, 1997.
- M. I Khan, M. L Kuntz and Y. Zhou: Sci. Technol. Weld. Join., 2008, 13, 294–304.
- D. J. Radakovic and M. D. Tumuluru: Weld. J., 2008, 87, 96s–105s.
- A. Joaquin, A. N. A. Elliott and C. Jiang: Weld. J., 2007, 86, 24–27.
- M. Pouranvari, P. Marashi, M. Goodarzi and H. Bahmanpour: ‘Metallurgical factors affecting failure mode of resistance spot welds’, Proc. Conf. on ‘Materials science and technology’, Pittsburgh, PA, USA, October 2008, AcerS/AIST/ASM/TMS, 2465–2475.
- X. Sun, E. V. Stephens, R. W. Davies, M. A. Khaleel and D. J. Spinella: Weld. J., 2004, 83, 188s–195s.
- M. Xia, E. Biro, Z. Tian and Y. Zhou: ISIJ Int., 2008, 48, 809–814.
- K. Kunishige, N. Yamauchi, T. Taka and N. Nagao: ‘Softening in weld heat affected zone of dual phase steel sheet for automotive wheel rim’, SAE paper no. 830632, SAE, Warrendale, PA, USA, 1983.
- N. Kapustka, C. Conrardy, S. Babu and C. Albright: Weld J., 2008, 87, 135s–148s.
- M. K. Wibowo and I. M. Richardson: Adv. Mater. Res., 2007, 15–17, 1020–1025.
- V. H. Baltazar Hernandez, S. K. Panda, M. L. Kuntz and Y. Zhou: Mater. Lett., Volume 64, 2010, Pages 207–210.
- P. C. Lin, S. H. Lin and J. Pan: Eng. Fract. Mech., 2006, 73, 2229–2249.
- F. Nikoosohbat, S H. Kheirandish, M. Goodarzi, M. Pouranvari and S. P. H. Marashi: Mater. Sci. Technol., to be published.
- X. Sun, E. V. Stephens and M. A. Khaleel: Weld. J., 2007, 86, 18s–25s.
- V. H. B. Hernandez, M. L. Kuntz, M. I. Khan and Y. Zhou: Sci. Technol. Weld. Join., 2008, 13, 769–776.
- J. Heuschkel: Weld. J, 1952, 31, 931s–943s.
- J. M. Sawhill and J. C. Baker: Weld. J., 1980, 59, 19ss–30s.