References
- L. Commin, M. Dumont, J. E. Masse and L. Barrallier: ‘Friction stir welding of AZ31 magnesium alloy rolled sheets: influence of processing parameters’, Acta Mater., 2009, 57, (2), 326–334.
- B. Lang, D. Q. Sun, G. Z. Li and X. F. Qin: ‘Effects of welding parameters on microstructure and mechanical properties of resistance spot welded magnesium alloy joints’, Sci. Technol. Weld. Join., 2008, 13, (8), 698–704.
- M. Marya and G. R. Edwards: ‘Influence of laser beam variables on AZ91D weld fusion zone microstructure’, Sci. Technol. Weld. Join., 2002, 7, (5), 286–293.
- M. M. Avedesian and H. Baker: ‘ASM specialty handbook: magnesium and magnesium alloys’; 1999, Materials Park, OH, ASM International.
- W. H. Kearns: in ‘Welding handbook’, 7th edn, Vol. 4, ‘Metals and their weldability’, 396; 1982, Miami, FL, American Welding Society.
- J. M. Sanchez-Amaya, T. Delgado, J. J. de Damborenea, V. Lopez and F. J. Botana: ‘Laser welding of AA5083 samples by high power diode laser’, Sci. Technol. Weld. Join., 2009, 14, (1), 78–86.
- K. Abderrazak, W. B. Salem, H. Mhiri, P. Bournot and M. Autric: ‘Nd:YAG laser welding of AZ91 magnesium alloy for aerospace industries’, Metall. Mater. Trans. B, 2009, 40B, (1), 54–61.
- H. Sun, G. Song and L. F. Zhang: ‘Effects of oxide activating flux on laser welding of magnesium alloy’, Sci. Technol. Weld. Join., 2009, 13, (4), 305–311.
- X. Cao, M. Jahazi, J. P. Immarigeon and W. Wallace: ‘A review of laser welding techniques for magnesium alloys’, J. Mater. Process. Technol., 2006, 171, (2), 188–204.
- H. A. Kazzaz and M. Medraj: ‘Effect of laser power and joint gap on weld quality of aerospace grade ZE41A-T5 magnesium alloy using Nd:YAG laser,’ Proc. 45th Annu. Conf. on ‘Magnesium technology in the global age’, Montreal, Canada, October 2006, Metallurgical Society of CIM, 503–518.
- M. Y. Lee, W. S. Chang and S. H. Kim: ‘A comparison of weld properties with or without filler wire on laser welding of magnesium alloy for car industry’, Proc. Conf. on ‘International welding/joining’, The Korean Welding and Joining Society (KWJS), Seoul, Korea, May 2007, 10–12.
- V. Ventzke, S. Riekehr and M. Kocak: ‘Microstructural and mechanical properties of laser welded sheets of magnesium AZ31- HP with and without filler wires’, Materialwiss. Werkst., 2008, 39, (7), 435–447.
- U. Dilthey, D. Fuest and W. Scheller: ‘Laser beam welding with filler wire’, Opt. Quant. Electron., 1995, 27, 1181–1191.
- A. S. Salminen and V. P. Kujanpä: ‘Effect of wire feed position on laser welding with filler wire’, J. Laser Appl., 2003, 15, (1), 2–10.
- A. Weisheit, R. Galun and B. L. Mordike: ‘CO2 laser beam welding of magnesium-based alloys’, Weld. Res., 1998, 77, (4), 149–154.
- M. Gao, X. Y. Zeng, B. Tan and J. C. Feng: ‘Study of laser MIG hybrid welded AZ31 magnesium alloy’, Sci. Technol. Weld. Join., 2009, 14, (4), 274–281.
- S. Kou: ‘Welding metallurgy’, 2nd edn, 122–126; 2002, Hoboken, NJ, Wiley Interscience.
- H. Zhao and T. Debroy: ‘Pore formation during laser beam welding of die-cast magnesium alloy AM60B – mechanism and remedy’, Weld. J., 2001, 80, (8), 204–210.
- W. Robert and J. Messler: ‘Principles of welding’, 326–327; 1999, New York, Wiley.
- Z. H. Yu, H. G. Yan, J. H. Chen and Y. Z. Wu: ‘Effect of Zn content on the microstructures and mechanical properties of laser beam-welded ZK series magnesium alloys’, J. Mater. Sci., 2010, DOI: 10.1007/s10853-010-4434-3.