References
- T. DebRoy and H. K. D. H. Bhadeshia: ‘Friction stir welding of dissimilar alloys – a perspective’, Sci. Technol. Weld. Join., 2010, 15, 266–270.
- T. Chen and W. B. Lin: ‘Optimal FSW process parameters for interface and welded zone toughness of dissimilar aluminum-steel joint’, Sci. Technol. Weld. Join., 2010, 15, 279–285.
- H. K. D. H. Bhadeshia and T. DebRoy: ‘Critical assessment: friction stir welding of steels’, Sci. Technol. Weld. Join 2009, 14, 193–196.
- P. F. Mendez, K. E. Tello and T. J. Lienert: Acta Mater., 2010, 58, 6012–6026.
- T. Pan: ‘Friction stir spot welding (FSSW) – a literature review’, SAE Technical Paper No. 2007-01-1702, Society of Automotive Engineers, Warrendale, PA, USA, 2007.
- V. X. Tran and J. Pan: ‘Failure modes of friction stir spot welds in cross-tension specimens of dissimilar aluminum sheets’, Sci. Technol. Weld. Join., 2010, 15, 286–292.
- Y. C. Chen and K. Nakata: ‘Effect of surface states of steel on the microstrutcure and mechanical properties of lap joints of magnesium alloy and steel by friction stir welding’, Sci. Technol. Weld. Join., 2010, 15, 293–298.
- Y. S. Sato, A. Shiota, H. Kokawa, K. Okamoto, Q. Yang and C. Kim:‘Effect of interfacial microstructure on the lap shear strength of friction stir spot weld of an aluminium alloy to a magnesium alloy’, Sci. Technol. Weld. Join, 2010, 15, 319–324.
- M. P. Miles, Z. Feng, K. Kohkonen, B. Weickum, R. Steel and L. Lev:‘Spot joining of AA 5754 and DP 590/DP 980 high strength steel sheets by consumable bit’, Sci. Technol. Weld. Join, 2010, 15, 325–330.
- A. P. Reynolds: ‘Visualisation of material flow in autogenous friction stir welds’, Sci. Technol. Weld. Join., 2000, 5, 120–124.
- T. U. Seidel and A. P. Reynolds: ‘Visualization of the material flow in AA2195 friction-stir welds using a marker insert technique’, Metall. Mater. Trans. A, 2001, 32A, 2879–2884.
- K. Kumar and S. V. Kailas: ‘Positional dependence of material flow in friction stir welding – an analysis of joint line remnant and its relevance to dissimilar metal welding’, Sci. Technol. Weld. Join., 2010, 15, 305–311.
- S. K. Park, S. T. Hong, J. H. Park, K. Y. Park, Y. J. Kwon and H. J. Son: ‘The effect of material locations on the properties of friction stir welding joints of dissimilar aluminum alloys’, Sci. Technol. Weld. Join., 2010, 15, 331–336.
- S. M. O. Tavares, R. A. S. Castro, V. Richter-Trummer, P. Vilaca, P. M. G. P. Moreira and P. M. S. T. de Castro: ‘Friction stir welding of T-joints with dissimilar aluminium alloy mechanical joint characterisation’, Sci. Technol. Weld. Join, 2010, 15, 312–318.