References
- Thomas WM, Nicholas ED, Needham JC, Murch MG, Temple-Smith P, Dawes CJ: ‘Friction stir butt welding’, International Patent PCT/GB92/02203, December 1991.
- Fonda R: ‘Texture development in friction stir welds’, Sci. Technol. Weld. Join., 2011, 16, 288–294.
- Sao YS, Park SHC, Michiuchi M, Kokawa H: ‘Constitutional liquation during dissimilar friction stir welding of Al and Mg alloys’, Scr. Mater., 2004, 50, 1223–1236.
- Gerlich A: ‘Liquid film formation and cracking during friction stir welding’, Sci. Technol. Weld. Join., 2011, 16, 295–299.
- Rao ZH, Liao SM, Tsai HL: ‘Modelling of hybrid laser–GMA welding – a review and challenges’, Sci. Technol. Weld. Join., 2011, 16, 300–305.
- Babu SS: ‘In pursuit of optimum welding system design for steels’, Sci. Technol. Weld. Join., 2011, 16, 306–312.
- Luo J, Wang XJ, Wang JX: ‘New technological methods and designs of stir head in resistance friction stir welding’, Sci. Technol. Weld. Join., 2009, 15, 650–654.
- Song JL, Lin SB, Yang CL, Fan CL, Ma GC: ‘Analysis of intermetallic layer in dissimilar TIG welding–brazing butt joint of aluminium alloy to stainless steel’, Sci. Technol. Weld. Join., 2010, 15, 213–218.
- Reisgen U, Olchok S, Jakobs S, Mavany M: ‘Hydra and lupus – the exotics among the hybrid welding methods’, Proc. 29th Int. Congr. on ‘Applications of lasers and electro-optics’, Anaheim, CA, USA, September 2010, Laser Institute of America, 70–77.
- Phanikumar G, Chattopadhyay K, Dutta P: ‘Joining of dissimilar metals: issues and modelling techniques’, Sci. Technol. Weld. Join., 2011, 16, 313–317.
- Bhadeshia HKDH: ‘Mathematical models in materials science’, Mater. Sci. Technol., 2008, 24, 128–135.
- DebRoy T, David SA: ‘Physical processes in fusion welding’, Rev. Mod. Phys., 1995, 67, 85–112.
- Zacharia T, Vitek JM, Goldak JA, DebRoy TA, Rappaz M, Bhadeshia HKDH: ‘Modelling of fundamental phenomena in welds’, Model. Simul. Mater. Sci. Eng., 1995, 3, 265–288.
- Chakraborti N: ‘Genetic algorithms in materials design and processing’, Int. Mater. Rev., 2004, 49, 246–260.
- Hattel J: ‘Numerical optimisation of friction stir welding – a review of future challenges’, Sci. Technol. Weld. Join., 2011, 16, 318–324.
- Thomas WM, Johnson KI, Wiesner CS: ‘Friction stir welding – recent developments in tool and process technologies’, Adv. Eng. Mater., 2003, 5, 485–490.
- Rai R, De A, Bhadeshia HKDH, DebRoy T: ‘Friction stir welding tools’, Sci. Technol. Weld. Join., 2011, 16, 325–342.
- De PS, Mishra RS: ‘Friction stir welding of precipitation strengthened aluminium alloys – scope and challenges’, Sci. Technol. Weld. Join., 2011, 16, 343–347.
- Mendez PF: ‘Synthesis and generalization of welding fundamentals to design new welding technologies: status, challenges, and a promising approach’, Sci. Technol. Weld. Join., 2011, 16, 348–356.
- Mendez PF, Tello KE, Lienert TJ: ‘Scaling of coupled heat transfer and plastic deformation around the pin in friction stir welding’, Acta Mater., 2010, 58, 6102–6026.
- Arora A, DebRoy T, Bhadeshia HKDH: ‘Back-of-the-envelope calculations in friction stir welding – velocities, peak temperature, torque, and hardness’, Acta Mater., 2011, 59, 2020–2028.
- Palmer TA, Elmer JW, Mayr P, Specht ED: ‘Direct observation of austenitization in 1055 C–Mn steel during continuous heating using in situ synchrotron X-ray diffraction’, Sci. Technol. Weld. Join., In production, DOI: 10.1179/1362171811Y.0000000028.
- Kokawa H: ‘Potential of grain boundary engineering to suppress welding degradations of austenitic stainless steels’, Sci. Technol. Weld. Join., 2011, 16, 357–362.
- Michaleris P: ‘Modeling welding residual stress and distortion: current and future research trends’, Sci. Technol. Weld. Join., 2011, 16, 363–368.
- Vacogne C, Wise R: ‘Joining of high performance carbon fibre/PEEK composites’, Sci. Technol. Weld. Join., 2011, 16, 369–376.