References
- Annoni M, Carboni M: ‘Ultrasonic metal welding of AA 6022‐T4 lap joints – Part I: technological characterisation and static mechanical behaviour’, Sci. Technol. Weld. Join., 2011, 16, 107–115
- Devine J: in ‘ASM handbook’, Vol. 6, ‘Welding, brazing, and soldering’, 324; 1993, Materials Park, OH, ASM International.
- Rozenberg LD: ‘Physical principles of ultrasonic technology’; 1973, New York, Plenum Press.
- Chang UI, Frisch J: ‘On optimisation of some parameters in ultrasonic metal welding’, Weld. J., 1974, 1, 24s–34s.
- Jones JB, Powers J: ‘Ultrasonic welding’, Weld. J., 1956, 35, (8), 761–766.
- Harman GG, Albers J: ‘The ultrasonic welding mechanism as applied to aluminum‐ and gold‐wire bonding in microelectronics’, IEEE Trans. Parts Hybrids Packag., 1977, 13, (4), 406–412.
- Peterson JM, McKaig HL, de Prisco CF: ‘Ultrasonic welding in electronic devices’, Proc. 1962 IRE National Convention, 1962, 3–12.
- Harthoorn JL: ‘Ultrasonic metal welding’, PhD thesis, Eindhoven, The Netherlands, Technische Hogeschool, 1978.
- Weber A: ‘The economics of ultrasonics. Other joining methods may be cheaper to buy, but none is as cost‐effective to use’, Assembly Mag., Aug. 2003, 44–52.
- Hetrick E, Jahn R, Reatherford L, Skogsmo J, Ward S, Wilkosz D, Devine J, Graff K, Gehrin R: ‘Ultrasonic spot welding: a new tool for aluminum joining’, Weld. J., 2005, 84, (2), 26–30.
- de Vries E: ‘Mechanics and mechanisms of ultrasonic metal welding’, PhD thesis, Columbus, OH, USA, Ohio State University, 2004.
- Radaj D, Sonsino CM, Fricke W: ‘Fatigue assessment of welded joints by local approaches’, 2nd edn, 437; 2006, Cambridge, Woodhead Publishing Limited.
- Fermér M, Svensson H: ‘Industrial experiences of FE‐based fatigue life predictions of welded automotive structures’, Fatigue Fract. Eng. Mater. Struct., 2001, 24, 489–500.
- Pook LP: ‘Fracture mechanics analysis of the fatigue behaviour of spot welds’, Int. J. Fract., 1975, 11, (2), 173–176.
- Fu M, Mallick PK: ‘Fatigue of self‐piercing riveted joints in aluminum alloy 6111’, Int. J. Fatigue, 2003, 25, 183–189.
- Carboni M, Beretta S, Monno M: ‘Fatigue behaviour of tensile–shear loaded clinched joints’, Eng. Fract. Mech., 2006, 73, 178–190.
- Hetrick ET, Baer JR, Zhu W, Reatherford LV, Grima AJ, Scholl DJ, Wilkosz DE, Fatima S, Wars SM: ‘Ultrasonic metal welding process robustness in aluminium automotive body construction applications’, Weld. J., 2009, 88, (2), 149s–158s.
- Annoni M, Carboni M: ‘Saldatura a ultrasuoni di lamierini: analisi e prestazioni’, Lamiera, 2007, 44, 118–128.
- Pook LP: ‘Crack paths’, 137; 2002, Southampton, WIT Press.
- Overbeeke JL, Draisma J: ‘Fatigue characteristics of heavy duty spot‐welded lap joints’, Met. Constr., 1974, 6, (7), 213–219.
- Wang MZ, Kassner ME: ‘Tensile and fatigue properties of aluminum alloy sheet 6022’, J. Mater. Eng. Perform., 2002, 11, 166–168.
- Soundararajan V, Yarrapareddy E, Kovacevic R: ‘Investigation of the stir lap welding of aluminium alloys AA5128 and AA6022’, J. Mater. Eng. Perform., 2007, 16, 477–484.
- Murakami Y, Fukushima Y, Toyama K, Matsuoka S: ‘Fatigue crack path and threshold in mode II and mode III loadings’, Eng. Fract. Mech., 2008, 75, 306–318.
- Beretta S, Foletti S, Valiullin K: ‘Fatigue strength for small shallow defects/cracks in torsion’, Int. J. Fatigue, 2011, 33, 287–299.
- Beretta S, Cerrini A, Desimone H: ‘Mixed mode fatigue crack propagation in a ferritic–perlitic cold‐drawn tube’, Eng. Fract. Mech., 2008, 75, 845–856.
- Murakami Y: ‘Metal fatigue: effects of small defects and non‐metallic inclusions’, 37; 2002, Oxford, Elsevier Science.
- ‘Destructive tests on welds in metallic materials – etchants for macroscopic and microscopic examination’, ISO 16060: Geneva, Switzerland, ISO, 2003.
- Simulia: ‘ABAQUS 6·7‐1’; 2008, Providence, RI, Simulia.
- Broek D: ‘Elementary engineering fracture mechanics’, 10, 1984, Dordrecht, Kluwer Academic Publishers Group.
- Annoni M, Moroni F, Mussi V: ‘Performance variability of aluminium hybrid LAP-joints obtained by means of adhesives and ultrasonic welding’, Int J Mater Form, 2010, 3 Suppl 1, 1051–1054.