Residual stresses in girth welds of carbon steel pipes: neutron diffraction analysis

References

• Feng Z (ed.): ‘Processes and mechanisms of welding residual stress and distortion’; 2005, Boca Raton, FL, CRC Press.
   Google Scholar
• Crawford M, Atkins GJ, Lillig DB, Kan WC, Wang HH: ‘Taking SCR’s deeper – qualification of nickel based welds for deepwater caternary risers’, Proc. Deep Offshore Technology Conf., PennWell, Houston, TX, USA, February 2008, Session 5- Riser Technology 1.
   Google Scholar
• Lillig DB, Weir MS, Kan WC, Hoyt DS: ‘Nickel-based alloy welding for enhance fatigue performance’, Proc. Deep Offshore Technology Conf., PennWell Vitória, Espírito Santo, Brazil, November 2005, Session 20- Riser SCR 2.
   Google Scholar
• Macdonald KA, Maddox SJ: ‘New guidance for fatigue design of pipeline girth welds’, Eng. Fail. Anal., 2003, 10, 177–197.
   Web of Science ®Google Scholar
• Mochizuki M: ‘Evaluation of through thickness residual stress in multipass butt welded joint by using inherent strain’, Sci. Technol. Weld. Join., 2006, 11, 496–501.
   Web of Science ®Google Scholar
• Qin XL, Michaleris P: ‘Elasto-visco-plastic analysis of welding residual stress’, Sci. Technol. Weld. Join., 2009, 14, 606–615.
   Web of Science ®Google Scholar
• Venkata Ramana P, Madhusudhan Reddy G, Mohandas T: ‘Microstructure, hardness and residual stress distribution in maraging steel gas tungsten arc weldments’, Sci. Technol. Weld. Join., 2008, 13, 388–394.
   Web of Science ®Google Scholar
• Law M, Gnaupel-Herold T, Luzin V, Bowie G: ‘Neutron residual stress measurements in linepipe’, Physica B, 2006, 386B, 900–903.
   Google Scholar
• Law M, Prask HJ, Luzin V, Gnaupel-Herold T: ‘Residual stress measurements in coil, linepipe and girth welded pipe’, Mater. Sci. Eng. A, 2006, A437, 60–63.
   Web of Science ®Google Scholar
• Leggatt RH: ‘Residual stresses in welded structures’, Int. J. Pres. Ves. Pip., 2008, 85, 144–151.
   Web of Science ®Google Scholar
• Rai S, Jayakumar T, Babu Rao C, Bhattacharya DK, Raj B: ‘Residual stress measurement in ferritic steel tube welds using X-ray diffraction’, Sci. Technol. Weld. Join., 1998, 3, (4), 204.
   Web of Science ®Google Scholar
• Scaramangas A, Porter Goff RFD: ‘Residual stresses in cylinder girth butt welds’, Proc. Offshore Technology Conf., Houston, TX, USA, May 1985, Paper 5024.
   Google Scholar
• Deo MV, Michaleris P: ‘Mitigation of welding induced buckling distortion using transient thermal tensioning’, Sci. Technol. Weld. Join., 2003, 8, 49–54.
   Web of Science ®Google Scholar
• Price DA, Williams SW, Wescott A, Harrison CJC, Rezai A, Steuwer A, Peel M, Staron P, Kocak M: ‘Distortion control in welding by mechanical tensioning’, Sci. Technol. Weld. Join., 2007, 12, 620–633.
   Web of Science ®Google Scholar
• Murakawa H, Beres M, Davies CM, Rashed S, Vega A, Tsunori M, Nikbin KM, Dye D: ‘Effect of low transformation temperature weld filler metal on welding residual stress’, Sci. Technol. Weld. Join., 2010, 15, 393–399.
   Web of Science ®Google Scholar
• Shirzadi AA, Bhadeshia HKDH, Karlsson L, Withers PJ: ‘Stainless steel weld metal designed to mitigate residual stresses’, Sci. Technol. Weld. Join., 2009, 14, (6), 559–565.
   Web of Science ®Google Scholar
• Dong P: ‘On the mechanics of residual stresses in girth welds’, J. Pres. Ves.-Trans. ASME, 2007, 129, (3), 345–355.
   Web of Science ®Google Scholar
• Yaghi A, Hyde TH, Becker AA, Sun W, Hilson G, Simandjuntak S, Flewitt PEJ, Pavier MJ, Smith DJ: ‘A comparison between measured and modeled residual stresses in a circumferentially butt-welded P91 steel pipe’, J. Pres. Ves.-Trans. ASME, 2010, 132, 0112061–0112010.
   Web of Science ®Google Scholar
• Yaghi A, Hyde TH, Becker AA, Sun W, Williams JA: ‘Residual stress simulation in thin and thick-walled stainless steel pipe welds including pipe diameter effects’, Int. J. Pres. Ves. Pip., 2006, 83, 864–874.
   Web of Science ®Google Scholar
• Withers PJ, Bhadeshia HKDH: ‘Residual stress. Part 1 – Measurement techniques’, Mater. Sci. Technol., 2001, 17, 355–365.
   Web of Science ®Google Scholar
• Hauk V: ‘Structural and residual stress analysis by nondestructive methods’; 1997, Amsterdam, Elsevier Science B.V.
   Google Scholar
• Bouchard PJ: ‘Validated residual stress profiles for fracture assessments of the stainless steel pipe girth welds’, Int. J. Pres. Ves. Pip., 2007, 84, 195–222.
   Web of Science ®Google Scholar
• Cho SH, Kim JW: ‘Analysis of residual stress in carbon steel weldment incorporating phase transformations’, Sci. Technol. Weld. Join., 2002, 7, 212–216.
   Web of Science ®Google Scholar