Advanced search
Publication Cover
Science and Technology of Welding and Joining Volume 16, 2011 - Issue 6
Journal homepage
203
Views
15
CrossRef citations to date
0
Altmetric
Original Article

Prevention of microcracking in dissimilar multipass welds of alloy 690 to type 316L stainless steel by Ce addition to filler metal

K SaidaDivision of Materials and Manufacturing Science, Graduate School of Engineering, Osaka University, Osaka, JapanCorrespondence[email protected]
,
A TaniguchiDivision of Materials and Manufacturing Science, Graduate School of Engineering, Osaka University, Osaka, Japan
,
H OkauchiSystem Technology Development Centre, Kawasaki Heavy Industries, Ltd, Akashi, Japan
,
H OgiwaraDivision of Materials and Manufacturing Science, Graduate School of Engineering, Osaka University, Osaka, Japan
&
K NishimotoDivision of Materials and Manufacturing Science, Graduate School of Engineering, Osaka University, Osaka, Japan
Pages 553-560 | Received 12 Jan 2011, Accepted 19 Feb 2011, Published online: 12 Nov 2013

References

  • Miglin BP, Theus GJ: ‘Stress corrosion cracking of alloy 600 and 690 in all volatile treated water at elevated temperature’, EPRI report no. NP-5761M, Electric Power Research Institute, Polo Alto, CA, USA, 1988.
  • Strauss SD: ‘Inconel 690 is alloy of choice for steam-generator tubing’, Power, 1996, 140–142, 29–30.
  • Miyaguchi J, Tabuchi K, Yamamoto T: ‘Towards maintenance service supporting secure nuclear energy’, Mitsubishi Juko Giho, 2003, 40–42, 92–95.
  • Wu W, Tsai CH: ‘Hot cracking susceptibility of fillers 52 and 82 in alloy 690 welding’, Metall. Mater. Trans. A, 1999, 30A, (2), 417–426.
  • Davé VR, Cola MJ, Kumar M, Schwartz AJ, Hussen GNA: ‘Grain boundary character in alloy 690 and ductility-dip cracking susceptibility’, Weld. J., 2004, 83, (1), 1s–5s.
  • Nissley NE, Lippold JC: ‘Development of the strain-to-fracture test’, Weld. J., 2003, 82, (12), 355s–364s.
  • Collins MG, Lippold JC: ‘An investigation of ductility dip cracking in nickel-based filler materials. Part I’, Weld. J., 2003, 82, (10), 288s–295s.
  • Collins MG, Ramirez AJ, Lippold JC: ‘An investigation of ductility dip cracking in nickel-based filler materials. Part II’, Weld. J., 2003, 82, (12), 348s–354s.
  • Collins MG, Ramirez AJ, Lippold JC: ‘An investigation of ductility dip cracking in nickel-based filler materials. Part III’, Weld. J., 2004, 83, (2), 39s–49s.
  • Nishimoto K, Saida K, Okauchi H: ‘Microcracking susceptibility in reheated weld metal – microcracking in multipass weld metal of alloy 690. Part 1’, Sci. Technol. Weld. Join., 2006, 11, (4), 455–461.
  • Nishimoto K, Saida K, Okauchi H, Ohta K: ‘Microcracking mechanism in reheated weld metal – microcracking in multipass weld metal of alloy 690. Part 2’, Sci. Technol. Weld. Join., 2006, 11, (4), 462–470.
  • Saida K, Nomoto Y, Okauchi H, Ogiwara H, Nishimoto K: ‘Influences of phosphorus and sulphur on ductility-dip cracking susceptibility in multipass weld metal of alloy 690’, Sci. Technol. Weld. Join., to be published.
  • Nishimoto K, Saida K, Okauchi H, Ohta K: ‘Prevention of microcracking in reheated weld metal by la addition to filler metal – microcracking in multipass weld metal of alloy 690. Part 3’, Sci. Technol. Weld. Join., 2006, 11, (4), 471–479.
  • Nishimoto K, Saida K, Fujiya Y: ‘Amelioration of micro-cracking in multipass weld metal of alloy 690 by adding rare earth metals’, Proc. ASME Pressure Vessels and Piping Division Conf., Prague, Czech Republic, July 2009, ASME, PVP2009-77235.
  • Nishimoto K, Woo I, Shirai M: ‘Effect of rare earth metal addition on HAZ cracking susceptibility – study on weldability of cast alloy 718 (report 7)’, Q. J. JWS, 2002, 20, (1), 78–86.
  • Nishimoto K, Woo I, Shirai M: ‘Underlying mechanism in the improvement of HAZ cracking susceptibility by rare earth metal addition – study on weldability of cast alloy 718 (report 8)’, Q. J. JWS, 2002, 20, (1), 87–95.
  • Lee HT, Jeng SL: ‘Characteristics of dissimilar welding of alloy 690 to 304L stainless steel’, Sci. Technol. Weld. Join., 2001, 6, (4), 225–234.
  • Lee HT, Jeng SL, Kuo TY: ‘The microstructure and fracture behavior of the dissimilar alloy 690-SUS304L joints with various Nb addition’, Metall. Mater. Trans. A, 2003, 34A, (5), 1097–1105.
  • Lee HT, Lin YD: ‘Microstructure and corrosion behaviour of alloy 690-SUS304L butt joints formed by electron beam welding’, Sci. Technol. Weld. Join., 2006, 11, (6), 650–565.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.