Advanced search
Publication Cover
Science and Technology of Welding and Joining Volume 16, 2011 - Issue 8
Journal homepage
235
Views
9
CrossRef citations to date
0
Altmetric
OriginalArticle

Stress distributions of welding joints in titanium–steel composite pressure vessel under working conditions

Y H WeiSchool of Material Science and Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China;State Key Laboratory of AdvancedWelding and Joining, Harbin Institute of Technology, Harbin150001, China
,
Z B DongState Key Laboratory of AdvancedWelding and Joining, Harbin Institute of Technology, Harbin150001, ChinaCorrespondence[email protected]
,
B LiuState Key Laboratory of AdvancedWelding and Joining, Harbin Institute of Technology, Harbin150001, China
,
R MaState Key Laboratory of AdvancedWelding and Joining, Harbin Institute of Technology, Harbin150001, China
,
X H ZhanSchool of Material Science and Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China
,
Y F LuNorthwest Non-ferrous Metal ResearchInstitute, Xi’an710016, China
&
P GuoNorthwest Non-ferrous Metal ResearchInstitute, Xi’an710016, China
 show all
Pages 709-716 | Received 15 May 2011, Accepted 08 Jul 2011, Published online: 12 Nov 2013

References

  • Xue H.-W, Li Z.-F, Chen D.-C: ‘Analysis of the cause and the countermeasuresfor the leakage of titanium steel composite pressure vessel in strength test’, Installation, 2005, 5, (144), 46–47.
  • Wang T: ‘Welding process of titanium/steel compositereactor’, Mater. Dev. Appl., 2003, 18, (2), 15–18.
  • Askari A, Das S: ‘Practical numerical analysis of a cracknear a weld subjected to primary loading and hydrogen embitterment’, J.Mater. Process. Technol., 2006, 173, 1–13.
  • Mousavi SAAAkbari, Santangi PFarhadi: ‘Effect of post-weld heat treatmenton the interface microstructure of explosively welded titanium–stainlesssteel composite’, Mater. Sci. Eng. A, 2008, A494, 329–336.
  • Wang X.-H: ‘Experimental investigation of largearea titanium–steel cladding plate heat-treated’, Dev.Appl. Mater., 2010, 3, 66–70.
  • Li B.-F: ‘Study on the weldability of titaniumand steel and titanium clad steel plate’, Dev.Appl. Mater., 2004, 1, 41–44.
  • Sun R.-L, Zhang J.-H: ‘Welding problems and present situationof titanium or titanium alloy and steel’, Aerosp.Mater. Technol., 1997, 2, 7–11.
  • Wang T, Zhang B.-G, Chen G.-Q: ‘Electron beam welding of Ti-15-3 titaniumalloy to 304 stainless steel with copper interlayer sheet’, Trans.Nonferrous Met. Soc. China, 2010, 20, (10), 1829–1834.
  • Kahraman N, Gülenç B, Findik F: ‘Joining of titanium/stainless steelby explosive welding and effect on interface’, J.Mater. Process. Technol., 2005, 169, (2), 127–133.
  • Mousavi SAAAkbari, Sartangi PFarhadi: ‘Experimental investigation of explosivewelding of cp-titanium/AISI 304 stainless steel’, Mater.Des., 2009, 30, (3), 459–468.
  • Akman E, Demir A, Canel T, Sınmazçelik T: ‘Laser welding of Ti6Al4V titanium alloys’, J.Mater. Process. Technol., 2009, 209, (8), 3705–3713.
  • Dey HC, Ashfaq M, Bhaduri AK, Rao KPrasad: ‘Joining of titanium to 304L stainlesssteel by friction welding’, J. Mater. Process.Technol., 2009, 209, (18–19), 5862–5870.
  • Fazel-Najafabadi M, Kashani-Bozorg SF, Zarei-Hanzaki A: ‘Joining of CP-Ti to 304 stainless steelusing friction stir welding technique’, Mater.Des., 2010, 31, (10), 4800–4807.
  • Yang X.-M, Huang Z.-J: ‘Structure designing of pressure vesselbuilt by zirconium/steel composite’, Pet. Chem.Equip., 2009, 4, 10–13.
  • Feulvarchl E, Robin V, Bergheau JM: ‘Thermometallurgical and mechanicalmodelling of welding – application to multipass dissimilar metal girthwelds’, Sci. Technol. Weld. Join., 2011, 16, (3), 221–226.
  • Soul FA, Zhang Y.-H: ‘Numerical study on stress induced camberingdistortion and its mitigation in welded titanium alloy sheet’, Sci.Technol. Weld. Join., 2006, 11, (6), 688–693.
  • ‘Alternativerules, rules for construction of pressure vessels’, 2007ASME Boiler and Pressure Vessel Code, Division 2, 2007.
  • Lu M.-W, Shou B.-N: ‘A new generation code for design byanalysis of pressure vessels – introduction of ASME VIII-2 2007 edition’, Pres.Container, 2007, 127, (9), 42–47.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.