References
- Yurioka N, Suzuki H, Ohshita S, Saito S: ‘Determination of necessary preheating temperature in steel welding’, Weld. J., 1983, 62, (6), 147s–153s.
- Satoh K, Matsui S, Horikawa K, Bessyo K, Okumura T: ‘JSSC guidance report on determination of safe preheating conditions without weld cracks in steel structures’, Trans. JWRI, 1973, 2, (2), 117–126.
- Yurioka N, Kasuya T: ‘A chart method to determine necessary preheat temperature in steel welding’, Q. J. Jpn Weld. Soc., 1995, 13, (3), 347–357.
- ‘Structural welding code – steel’, in ‘Appendix XI, guideline on alternative methods for determining preheat’, 299–308, AWS D1·1 2004, AWS, Miami, FL, USA.
- Gaillard R, Debiaz S, Hubert M, Defourny J: ‘Methods for optimizing preheat temperature in welding’, Weld. World, 1988, 26, (9/10), 216–230.
- Ghosh PK, Singh U: ‘Influence of pre- and post-weld heating on weldability of modified 9Cr–1Mo(V–Nb) steel pipe under shielded metal arc and tungsten inert gas welding processes’, Sci. Technol. Weld. Join., 2004, 9, (3), 229–236.
- Hirth JP: ‘Effects of hydrogen on the properties of iron and steel’, Metall. Trans. A, 1980, 11A, (6), 861–890.
- Irving B: ‘Preheat: the main defence against hydrogen cracking’, Weld. J., 1992, 71, (7), 25–31.
- Mundra K, Blackburn JM, DebRoy T: ‘Absorption and transport of hydrogen during gas metal arc welding of low alloy steel’, Sci. Technol. Weld. Join., 1997, 2, (4), 174–184.
- ‘Welding and allied processes – determination of hydrogen content in arc weld metal’, ISO/DIS 3690, ISO, GenevaSwitzerland.
- Padhy GK, Ramasubbu V, Murugesan N, Remash C, Albert SK: ‘Hot extraction of diffusible hydrogen and its measurement using a hydrogen sensor’, IIW Doc. II-1766-2011.
- Ramesh C, Murugesan N, Krishnaiah MV, Ganesan V, Periaswami G: ‘Improved Nafion-based amperometric sensor for hydrogen in argon’, J. Solid State Electrochem., 2008, 12, (9), 1109–1116.
- Velayutham G, Ramesh C, Murugesan N, Manivannan V, Dhathathreyan KS, Periaswami G: ‘Nafion based amperometric hydrogen sensor’, Ionics, 2004, 10, (1/2), 63–67.
- Padhy GK, Ramasubbu V, Murugesan N, Remash C, Albert SK: ‘Developing a sensor for diffusible hydrogen measurement’, Weld. J., 2011, 90, (3), 47–53.
- Nevasmaa P: ‘Predictive model for the prevention of weld metal hydrogen cracking in high-strength multipass welds’, http://herkules.oulu.fi/isbn9514271815/.
- Bailey N, Coe FR, Gooch TG, Hart PHM, Jenkins H, Pargeter RJ: ‘Welding steels without hydrogen cracking’; 1992, Materials Park, OH, ASM International.
- Louthan MR: ‘Hydrogen embrittlement of metals: a primer for the failure analyst’, J. Fail. Anal. Prev., 2008, 8, (3), 289–307.
- Chaudhuri A, Radhakrishnan TP: ‘A reexamination of the trapping of hydrogen in iron and steel’, Mater. Trans., JIM, 1993, 3, (5), 443–449.
- Albert SK, Ramasubbu V, Parvathavarthini N, Gill TPS: ‘Influence of alloying on hydrogen-assisted cracking and diffusible hydrogen content in Cr–Mo steel welds’, Sadhana, 2003, 28, (3/4), 383–393.
- Grabke HJ, Riecke E: ‘Absorption and diffusion of hydrogen in steels’, Mater. Tehnol., 2000, 34, (6), 331–342.
- Dull DL, Nobe K: ‘Hydrogen trapping in Ferrovac E-iron, mild steel and 4340 steel’, Mater. Corros., 1982, 33, (8), 439–448.
- Brouwer RC: ‘Hydrogen diffusion and solubility in vanadium modified pressure vessel steels’, Scr. Metall. Mater., 1992, 27, (3), 353–358.
- Bollinghaus T, Hoffmeister H, Middel C: ‘Scatterbands for hydrogen diffusion coefficients in steels having a ferritic or martensitic microstructure and steels having an austenitic microstructure at room temperature’, Weld. World, 1996, 37, (1/2), 16–23.
- Wongpanya P, Boellinghaus T, Lothongkum G: ‘Effects of hydrogen removal heat treatment on residual stresses in high strength structural steel welds’, Weld. World, 2006, 50, (Special Issue), 96–103.
- Wongpanya P, Boellinghaus T, Lothongkum G: ‘Heat treatment procedures for hydrogen assisted cracking avoidance in S 1100 QL steel root welds’, Weld. World, 2008, 52, 671–678.