Assessment of ductility dip cracking susceptibility on Ni based alloy by FEM simulation

References

• Nissley NE, Lippold JC: ‘Ductility-dip cracking susceptibility of austenitic alloys’, Proc. Int. Conf. on ‘Trends in welding research’, Phoenix, AZ, USA, April 2002, ASM International, 64–69.
   Google Scholar
• Saida K, Okabe Y, Hata K, Nishimoto K, Kiuchi K, Nakayama J: ‘Hot cracking behaviour and susceptibility of extra high purity type 310 stainless steels’, Sci. Technol. Weld. Join., 2010, 15, 87–96.
   Web of Science ®Google Scholar
• Saida K, Taniguchi A, Okauchi H, Ogiwara H, Nishimoto K: ‘Prevention of microcracking in dissimilar multipass welds of alloy 690 to type 316L stainless steel by ce addition to filler metal’, Sci. Technol. Weld. Join., 2011, 16, 553–560.
   Web of Science ®Google Scholar
• Naffakh H, Shamanian M, Ashrafizadeh F: ‘Dissimilar welding of AISI 310 austenitic stainless to nickel-based alloy Inconel 657’, J. Mater. Process. Technol., 2009, 209, 3628–3639.
   Web of Science ®Google Scholar
• Dupont JN, Robino CV, Anderson TD: ‘Influence of Gd and B on solidification behaviour and weldability of Ni–Cr–Mo alloy’, Sci. Technol. Weld. Join., 2008, 13, 550–565.
   Web of Science ®Google Scholar
• Lee DJ, Byun JC, Sung JH, Lee HW: ‘The dependence of crack properties on the Cr/Ni equivalent ratio in AISI 304L austenitic stainless steel weld metals’, Mater. Sci. Eng. A, 2009, A513–A514, 154–159.
   Google Scholar
• Kiser SD, Zhang R, Baker BA: ‘A new welding material for improved resistance to ductility dip cracking’, ASM Proc. Int. Conf. on ‘Trends in welding research’, Pine Mountain, GA, USA, June 2008, ASM International, 639–644.
   Google Scholar
• Muránsky O, Smith MC, Bendeich PJ, Edwards L: ‘Validated numerical analysis of residual stresses in safety relief valve (SRV) nozzle mock-ups’, Comput. Mater. Sci., 2011, 50, 2203–2215.
   Web of Science ®Google Scholar
• Nissley NE, Lippold JC: ‘Development of the strain-to-fracture test’, Weld. J., 2003, 82, 355S–364S.
   Web of Science ®Google Scholar
• Norton SJ, Lippold JC: ‘Development of a gleeble-based test for postweld heat treatment cracking susceptibility’, Proc. Int. Conf. on ‘Trends in welding research’, Phoenix, AZ, USA, April 2002, ASM International, 609–614.
   Google Scholar
• Savage WF, Lundin CD: ‘The varestraint test’, Weld. J., 1965, 10, 432–433.
   Google Scholar
• Weite WU, Tsai CH: ‘Hot cracking susceptibility of fillers 52 and 82 in alloy 690 welding’, Metall. Mater. Trans. A, 1999, 30A, 417–426.
   Google Scholar
• Ogiwara H, Mori H, Tokuichi H, Saida K, Nishimoto K, Tanigawa H: ‘Hot cracking susceptibility of F82H with controlled Ta content’, J. Nucl. Mater., 2011, 417, 59–62.
   Web of Science ®Google Scholar
• Lundin CD, Lingenfelter AC, Grotke GE, Lessmann GC, Matthews SJ: ‘Varestraint test’, Weld. Res. Counc. Bull., Aug. 1982, (280).
   Google Scholar
• Patterson RA, Milewski JO: ‘GTA weld cracking—alloy 625 to 304L’, Weld. J., 1985, 64, 227–231.
   Web of Science ®Google Scholar
• Kikel JM, Parker DM: ‘Ductility dip cracking susceptibility of filler metal 52 and alloy 690’, Proc. Int. Conf. on ‘Trends in welding research’, Pine Mountain, GA, USA, June 1998, ASM International, 757–762.
   Google Scholar
• Woo I, Nishimoto K, Tanaka K, Shirai M: ‘Effect of grain size on heat affected zone cracking susceptibility. Study of weldability of Inconel 718 cast alloy (2nd report)’, Weld. Res. Abroad, 2001, 47, 9–17.
   Google Scholar
• Nishimoto K, Saida K, Okauchi H: ‘Microcracking in multipass weld metal of alloy 690. Part 1. Microcracking susceptibility in reheated weld metal’, Sci. Technol. Weld. Join., 2006, 11, 455–461.
   Web of Science ®Google Scholar
• Nishimoto K, Saida K, Okauchi H, Ohta K: ‘Microcracking in multipass weld metal of alloy 690. Part 2: microcracking mechanism in reheated weld metal’, Sci. Technol. Weld. Join., 2006, 11, 462–470.
   Web of Science ®Google Scholar
• Saida K, Nomoto Y, Okauchi H, Ogiwara H, Nishimoto K: ‘Influences of phosphorus and sulphur on ductility dip cracking susceptibility in multipass weld metal of alloy 690’, Sci. Technol. Weld. Join., 2012, 17, 1–8.
   Web of Science ®Google Scholar
• Nishimoto K, Saida K, Fujiya Y: ‘Amelioration of microcracking in multipass weld metal of alloy 690 by adding rare earth metals’, Proc. ASME 2009 Pressure Vessels and Piping Conf., Prague, Czech Republic, July 2010, ASME, 1063–1070.
   Google Scholar
• Chung WC, Tsay LW, Chen C: ‘Solidification cracking susceptibility of alloy 52 weld overlay on 316L stainless steel’, Mater. Sci. Forum, 2012, 704–705, 529–534.
   Google Scholar
• Collins MG, Ramirez AJ, Lippold JC: ‘An investigation of ductility dip cracking in nickel-based weld metals – part II’, Weld. J., 2003, 82, 348–354.
   Web of Science ®Google Scholar
• Collins MG, Ramirez AJ, Lippold JC: ‘An investigation of ductility-dip cracking in nickel-based weld metals – part III’, Weld. J., 2004, 83, 39–49.
   Web of Science ®Google Scholar
• Nissley NE, Lippold JC: ‘Ductility-dip cracking susceptibility of nickel-based weld metals part 1: strain-to-fracture testing’, Weld. J., 2008, 87, 257–264.
   Web of Science ®Google Scholar
• Nissley NE, Collins MG, Guaytima G, Lippold JC: ‘Development of the strain-to-fracture test for evaluating ductility-dip cracking in austenitic stainless steels and Ni-base alloys’, Weld. World, 2002, 46, 32–40.
   Google Scholar
• Nissley NE, Lippold JC: ‘Ductility-dip cracking susceptibility of nickel-based weld metals: part 2 – microstructural characterization’, Weld. J., 2009, 88, 131s–140s.
   Web of Science ®Google Scholar
• Ramirez AJ, Lippold JC: ‘High temperature behavior of Ni-base weld metal Part I. Ductility and microstructural characterization’, Mater. Sci. Eng. A, 2004, A380, 259–271.
   Web of Science ®Google Scholar
• Ramirez AJ, Lippold JC: ‘High temperature behavior of Ni-base weld metal. Part II: insight into the mechanism for ductility dip cracking’, Mater. Sci. Eng. A, 2004, A380, 245–258.
   Web of Science ®Google Scholar
• Young GA, Capobianco TE, Penik MA, Morris BW, McGee JJ: ‘The mechanism of ductility dip cracking in nickel–chromium alloys’, Weld. J., 2008, 87, 31–43.
   Web of Science ®Google Scholar
• Metzler DA: ‘A Gleeble®-based method for ranking the strain-age cracking susceptibility of Ni-based superalloys’, Weld. J., 2008, 87, 249–256.
   Web of Science ®Google Scholar
• Torres EA, Caram R, Ramirez AJ: ‘Grain boundary sliding phenomenon and its effect on high temperature ductility of Ni-base alloys’, Mater. Sci. Forum, 2010, 638–642, 2858–2863.
   Google Scholar
• Goldak J, Chakravarti A, Bibby M: ‘A new finite element model for welding heat sources’, Metall. Trans. B, 1984, 15B, 299–305.
   Web of Science ®Google Scholar
• Li PL, Lu H: ‘Pattern search method and artificial neural network prediction of double ellipsoid heat source of submerged arc welding’, Adv. Mater. Res., 2011, 201–203, 1825–1833.
   Google Scholar
• Babu S, Kumar TS, Balasubramanian V: ‘Optimizing pulsed current gas tungsten arc welding parameters of AA6061 aluminium alloy using Hooke and Jeeves algorithm’, Trans. Nonferr. Met. Soc. China, 2008, 18, 1028–1036.
   Web of Science ®Google Scholar