Advanced search
Publication Cover
Science and Technology of Welding and Joining Volume 18, 2013 - Issue 1
Journal homepage
273
Views
15
CrossRef citations to date
0
Altmetric
Original Article

Influence of Ti/N ratio on simulated CGHAZ microstructure and toughness in X70 steels

Z X ZhuSchool of Mechanical, Materials and Mechatronic Engineering, University of Wollongong, Wollongong, NSW2522, AustraliaCorrespondence[email protected]
,
M MarimuthuSchool of Mechanical, Materials and Mechatronic Engineering, University of Wollongong, Wollongong, NSW2522, Australia
,
L KuzmikovaSchool of Mechanical, Materials and Mechatronic Engineering, University of Wollongong, Wollongong, NSW2522, Australia
,
H J LiSchool of Mechanical, Materials and Mechatronic Engineering, University of Wollongong, Wollongong, NSW2522, Australia
,
F BarbaroSchool of Mechanical, Materials and Mechatronic Engineering, University of Wollongong, Wollongong, NSW2522, Australia;CBMM Technology Suisse, 14, Rue du Rhone, Geneve1204, Switzerland
,
L ZhengBaoshan Iron & Steel Co., Ltd., 899 Fujin Rd, Baoshan District, Shanghai, 201900, China
,
M Z BaiBaoshan Iron & Steel Co., Ltd., 899 Fujin Rd, Baoshan District, Shanghai, 201900, China
&
C JonesBlueScope Steel, Port Kembla, NSW2505, Australia
 show all
Pages 45-51 | Received 09 Jul 2012, Accepted 12 Sep 2012, Published online: 12 Nov 2013

References

  • Ju JB, Lee JS, Jang JI: ‘Fracture toughness anisotropy in a API steel line-pipe’, Mater. Lett., 2007, 61, 5178–5180.
  • Pan YT, Lee JL: ‘Development of TiOx-bearing steels with superior heat-affected zone toughness’, Mater. Des., 1994, 15, 331–338.
  • Tomita Y, Saito N, Tsuzuki T, Tokunaga Y, Okamoto K: ‘Improvement in HAZ toughness of steel by TiN-MnS addition’, ISIJ Int., 1994, 34, 829–835.
  • Mitchell P, Hart P, Morrison W: ‘The effect of microalloying on HAZ toughness’, Proc. Int. Conf. on ‘Microalloying ’95’, Pittsburgh, PA, USA, June 1995, the Iron and Steel Society, 149–162.
  • Suzuki S, Ichimiya K, Akita T: ‘High tensile strength steel plates with excellent HAZ toughness for shipbuilding: JFE EWEL technology for excellent quality in HAZ of high heat input welded joints’, JFE Technical Report No. 5, 2005, 24–29.
  • Laitinen RO: ‘Improvement of weld HAZ toughness at low heat input by controlling the distribution of M-A constituents’; 53; 2006, Oulu, Oulu University Press.
  • EI-Kashif TKE:‘Alloy steel – properties and use’(, Morales E V, et al..), Chapter 4, 87–108; 2011, Croatia, InTech.
  • Batte A, Boothby P, Rothwell A: ‘Understanding the weldability of niobium-bearing HSLA steels’, Proc. Int. Symp. on ‘Niobium’, Orlando, FL, USA, December 2001, Minerals, Metals and Materials Society, 931–958.
  • Gladman T, Dulieu D: ‘Grain-size control in steels’, Met. Sci., 1974, 8, 167–176.
  • Pickering F: ‘Titanium nitride technology’, Proc. 35th Mechanical Working and Steel Processing Conf., Pittsburgh, PA, USA, October 1993, Iron & Steel Society, 477–491.
  • Kejian H, Baker T: ‘The effects of small titanium additions on the mechanical properties and the microstructures of controlled rolled niobium-bearing HSLA plate steels’, Mater. Sci. Eng. A, 1993, A169, 53–65.
  • Penniston C, Collins L, Hamad F: ‘Effects of Ti, C and N on weld HAZ toughness of high strength line pipe’, Proc. 7th Int. Pipeline Conf., Calgary, Canada, September–October 2008, International Petroleum Technology Institute and the Pipeline Division, 75–83.
  • Smaill JS, Keown SR, Erasmus LA: ‘Effect of titanium additions on the strain aging characteristics and mechanical properties of carbon-manganese reinforcing steels’, Met. Technol., April 1976, 194–201.
  • Mukae S, Nishio K, Katoh M: ‘Solution of TiN during synthetic weld thermal cycling and heat affected zone toughness in low carbon steels’, Trans. Jpn Weld. Soc., 1987, 18, 148–158.
  • Bhadeshia H: ‘Thermodynamic analysis of isothermal transformation diagrams’, Met. Sci., 1982, 16, 159–166.
  • Babu SS: ‘Acicular ferrite and bainite in steels’, PhD thesis, University of Cambridge, Cambridge, UK, 1992.
  • McGurk T, Speer J, Matlock D: ‘Effect of alloy modifications on haz microstructure and properties of HSLA X80 pipeline steel’, Mater. Sci. Technol., 2006, 6, 347.
  • Kim S, Lee S, Lee BS: ‘Effects of grain size on fracture toughness in transition temperature region of Mn-Mo-Ni low-alloy steels’, Mater. Sci. Eng. A, 2003, A359, 198–209.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.