Development of high strength stainless steel brazed joints using rapidly solidified filler alloys

References

• Zhao H, Ma X, Cai Z, Wang PC: ‘Effect of low temperature exposure on impact characteristics of epoxy bonded high strength steels’, Sci. Technol. Weld. Join., 2011, 16, 405–411.
   Web of Science ®Google Scholar
• Chen YC, Fujii H, Tsumura T, Kitagawa Y, Nakata K, Ikeuchi K, Matsubayashi K, Michishita Y, Fujiya Y, Katoh J: ‘Friction stir processing of 316L stainless steel plate’, Sci. Technol. Weld. Join., 2009, 14, 197–201.
   Web of Science ®Google Scholar
• Zhao H, Duan X, Ma M, Lu L, Cai Z, Wang PC, Fickes JD: ‘Dynamic characteristics of adhesive bonded high strength steel joints’, Sci. Technol. Weld. Join., 2010, 15, 486–490.
   Web of Science ®Google Scholar
• Sun QJ, Lin SB, Yang CL, Zhao GQ: ‘Penetration increase of AISI 304 using ultrasonic assisted tungsten inert gas welding’, Sci. Technol. Weld. Join., 2009, 14, 765–767.
   Web of Science ®Google Scholar
• Yuan X., Kim M.B., Cho Y.H., Kang C.Y., ‘Microstructures, mechanical and chemical propertiesof TLP-bonded joints in a duplex stainless steel withamorphous Ni-based insert alloys’, Metall. Mater. Trans. A, 2012, 43A, 1989–2001.
   Web of Science ®Google Scholar
• Kawashima F, Igari T, Miyoshi Y, Kamito Y, Tanihira M: ‘High temperature strength and inelastic behavior of plate-fin structures for HTGR’, Nucl. Eng. Des., 2007, 237, 591–599.
   Web of Science ®Google Scholar
• Aquaro D, Pieve M: ‘High temperature heat exchangers for power plants: performance of advanced metallic recuperators’, Appl. Therm. Eng., 2007, 27, 389–400.
   Web of Science ®Google Scholar
• Traverso A, Massardo FA: ‘Optimal design of compact recuperators for microturbine application’, Appl. Therm. Eng., 2005, 25, 2054–2071.
   Web of Science ®Google Scholar
• McDonald CF: ‘Recuperator considerations for future higher efficiency microturbines’, Appl. Therm. Eng., 2003, 23, 1463–1487.
   Web of Science ®Google Scholar
• Schwartz MM: ‘Applications for gold-base brazing alloys’, Gold Bull., 1975, 8, 102–110.
   Google Scholar
• Saida K, Sakatani T, Song W, Nishimoto K: ‘Hot cracking in laser braze joint of high strength stainless steel using gold brazing filler metal – prevention of hot cracking by controlling thermal cycle’, Sci. Technol. Weld. Join., 2009, 14, 254–261
   Web of Science ®Google Scholar
• Jang JSC, Shih HP: ‘Evolution of microstructure of AISI 304 stainless steel joint brazed by mechanically alloyed nickel base filler with different silicon content’, J. Mater. Sci. Lett., 2003, 22, 79–82.
   Google Scholar
• Rabinkin A: ‘New applications for rapidly solidified brazing foils’, J. Weld., 1989, 68, 39–46.
   Web of Science ®Google Scholar
• Rabinkin A, Wenski E, Ribaudo A: ‘Brazing atainless steel using a new MBF series of Ni–Cr–B–Si amorphous brazing foils’, Weld. J., 1998, 77, 66s–74s.
   Web of Science ®Google Scholar
• Rabinkin A: ‘Brazing with (NiCoCr)–B–Si amorphous brazing filler metals: alloys, processing, joint structure, properties, applications’, Sci. Technol. Weld. Join., 2004, 9, 181–199.
   Web of Science ®Google Scholar
• Philips NR, Levi CG, Evans AG: ‘Mechanisms of microstructure evolution in an austenitic stainless steel bond generated using a quaternary braze alloy’, Metall. Mater. Trans. A, 2008, 39A, 142.
   Web of Science ®Google Scholar
• Kokawa H, Lee CH, North TH: ‘Effect of grain boundaries on isothermal solidification during transient liquid phase brazing’, Mater. Trans. A, 1991, 22A, 1627–1631.
   Web of Science ®Google Scholar
• Mullins WW: ‘Theory of thermal grooving’, J. Appl. Phys, 1957, 28, 333–339.
   Web of Science ®Google Scholar
• Roy RK, Panda AK, Das SK, Govind, Mitra A: ‘Development of a copper-based filler alloy for brazing stainless steels’, Mater. Sci. Eng. A, 2009, A523, 312–315.
   Google Scholar
• Xiong H, Wan C, Zhou Z: ‘Joining of Si3N4 to Si3N4 using rapidly-solidified CuNiTiB brazing filler foils’, J. Mater. Process. Technol., 1998, 75, 137–142.
   Web of Science ®Google Scholar
• Brandes EA: ‘Smithells metals reference book’, (ed. , Brook G B, ed), 7th edn, 938; 1992, Oxford, Butterworth-Heinemann.
   Google Scholar
• ASM International: ‘ASM handbook’, Vol. 3, ‘Alloy phase diagrams’, 724; 1992, Materials Park, OH, ASM International.
   Google Scholar
• Humpston G, Jacobson DM: ‘Principles of soldering and brazing’, 1993; Metals Park, OH, ASM International.
   Google Scholar
• Parravano N: Int. Z. Metallogr., 1973, 4, 171.
   Google Scholar
• Chen H, Gong J.-M, Tu ST: ‘Numerical modelling and experimental investigation of diffusion brazing SS304/BNi-2/SS304 joint’, Sci. Technol. Weld. Join., 2009, 14, 32–41.
   Web of Science ®Google Scholar
• Jiang W, Gong J, Tu ST: ‘Effect of brazing temperature on tensile strength and microstructure for a stainless steel plate-fin structure’, Mater. Des., 2011, 32, 736–742.
   Web of Science ®Google Scholar
• Wang W, Zhang S, He X: ‘Diffusion of boron in alloys’, Acta Metall. Mater., 1995, 43, 1693–1699.
   Google Scholar
• Kubashevski O, Alcock CB, Spencer PJ: ‘Materials thermochemistry’, 6th edn; 1993, Oxford, Pergamon.
   Google Scholar
• Karlson L, Norden H: ‘Non-equilibrium grain boundary segregation of boron in austenitic stainless steel-II. Fine scale segregation behaviour’, Acta Metall., 1988, 36, 13–24.
   Google Scholar