Effects of fluxes on distribution of SiC particles and microstructures and mechanical properties of nanoparticles strengthening A-TIG (NSA-TIG) welded magnesium alloy joints

References:

• Zhang ZD, Liu LM, Shen Y, Wang L: ‘Welding of magnesium alloys with activating flux’, Sci. Technol. Weld. Join., 2005, 10, 737–743.
   Web of Science ®Google Scholar
• Tseng KH: ‘Development and application of oxide-based flux powder for tungsten inert gas welding of austenitic stainless steels’, Powder. Technol., 2013, 233, 72–79.
   Web of Science ®Google Scholar
• Liu LM, Zhang ZD, Song G, Shen Y: ‘Effect of cadmium chloride flux in active flux TIG welding of magnesium alloys’, Mater. Trans., 2006, 74, 446–449.
   Google Scholar
• Gurevich SM, Zamkov VN: ‘Welding titanium with a nonconsumable electrode using fluxes’, Avtom. Svarka., 1966, 12, 6–13.
   Google Scholar
• Howse DS, Lucas W: ‘Investigation into arc constriction by active fluxes for tungsten inert gas welding’, Sci. Technol. Weld. Join., 2000, 5, 189–193.
   Web of Science ®Google Scholar
• Li QM, Wang XH, Zou ZD, Wu J: ‘Effect of activating flux on arc shape and arc voltage in tungsten inert gas welding’, Trans. Nonferrous Met. Soc. China, 2007, 17, 486–490.
   Web of Science ®Google Scholar
• Xu YL, Dong ZB, Wei YH, Yang CL: ‘Marangoni convection and weld shape variation in A-TIG welding process’, Theory. Appl. Fract. Mech., 2007, 48, 178–186.
   Web of Science ®Google Scholar
• Heiple CR, Roper JR: ‘Effect of selenium on GTAW fusion zone geometry’, Weld. J., 1981, 60, 143–145.
   Web of Science ®Google Scholar
• Shen J, Wang LZ, Peng D, Wang D: ‘Effects of CaF2 coating on the microstructures and mechanical properties of tungsten inert gas welded AZ31 magnesium alloy joints’, Metall. Mater. Trans. A, 2012, 43A, 4397–4405.
   Google Scholar
• Liu LM, Zhang ZD, Song G, Wang L: ‘Mechanism and microstructure of oxide fluxes for gas tungsten arc welding of magnesium alloy’, Metall. Mater. Trans. A, 2007, 38A, 649–658.
   Web of Science ®Google Scholar
• Zhang ZD, Liu LM, Shen Y, Wang L: ‘Mechanical properties and microstructures of a magnesium alloy gas tungsten arc welded with a cadmium chloride flux’, Mater. Charact., 2008, 59, 40–46.
   Web of Science ®Google Scholar
• Nie JF: ‘Effects of precipitate shape and orientation on dispersion strengthening in magnesium alloys’, Scr. Mater., 2003, 48, 1009–1010.
   Web of Science ®Google Scholar
• Günther R, Hartig Ch, Bormann R: ‘Grain refinement of AZ31 by (SiC)P: theoretical calculation and experiment’, Acta Mater., 2006, 54, 5591–5597.
   Google Scholar
• Shen J, Liu K, Zhai DJ, Wang D, Xu N, Jiang CJ: ‘Effects of SiC ceramic particles on microstructures and mechanical properties of gas tungsten arc welded AZ31 magnesium alloy with Cr2O3 flux coating’, Sci. Technol. Weld. Join., 2013, 18, (1), 11–18.
   Google Scholar
• Heiple CR, Roper JR: ‘Mechanism for minor element effect on GTA fusion zone geometry’, Weld. J., 1982, 61, 97–102.
   Web of Science ®Google Scholar
• Liu LM, Shen Y, Zhang ZD: ‘Effect of cadmium chloride flux in GTA welding of magnesium alloys’, Sci. Technol. Weld. Join., 2006, 11, (4), 398–402.
   Google Scholar
• Zhang ZD, Liu LM, Shen Y, Wang L: ‘Welding of magnesium alloys with activating flux’, Sci. Technol. Weld. Join., 2005, 10, (6), 737–743.
   Google Scholar
• Wang LZ, Shen J, Xu N: ‘Effects of TiO2 coating on the microstructures and mechanical properties of tungsten inert gas welded AZ31 magnesium alloy joints’, Mater. Sci. Eng. A, 2011, A528, 7276–7284.
   Google Scholar
• Tsai TC, Chou CC, Tsai DM, Chiang KT: ‘Modeling and analyzing the effects of heat treatment on the characteristics of magnesium alloy joint welded by the tungsten-arc inert gas welding’, Mater. Des., 2011, 32, 4187–4194.
   Web of Science ®Google Scholar
• Kupczyk J: ‘Application of significance tests in quantitative metallographic analysis of a C - Mn -B steel’, Mater. Charact., 2006, 57, 171–175.
   Google Scholar
• Braszczynska KN, Litynska L, Zyska A, Baliga W: ‘TEM analysis of the interfaces between the components in magnesium matrix composites reinforced with SiC particles’, Mater. Chem. Phys., 2003, 81, 326–328.
   Web of Science ®Google Scholar
• Zhang SY, Jiang FS, Ding WB: ‘Microstructure and mechanical performance of pulsed current gas tungsten arc surface engineered composite coatings on Mg alloy reinforced by SiCp’, Mater. Sci. Eng. A, 2008, A490, 208–220.
   Google Scholar
• Mishra RS, Ma ZY: ‘Friction stir welding and processing’, Mater. Sci. Eng. R, 2005, 50, 1–78.
   Web of Science ®Google Scholar
• Reed-Hill RE, Abbaschian R: ‘Physical metallurgy principles’, 3rd edn, 315–318; 1994, PWS Publishing Company.
   Google Scholar
• Asadi P, Besharati Givi MK, Abrinia K, Taherishargh M, Salekrostam R: ‘Effects of SiC particle size and process parameterson the microstructure and hardness of AZ91/SiC composite layer fabricated by FSP’, J. Mater. Eng. Perform., 2011, 20, 1054–1062.
   Google Scholar
• Zarghani AS, Kashani-Bozorg SF, Zarei-Hanzaki A: ‘Microstructures and mechanical properties of Al/Al2O3 surface nano-composite layer produced by friction stir processing’, Mater. Sci. Eng. A, 2009, A500, 84–91.
   Google Scholar
• Poddar P, Srivastava VC, De PK, Sahoo KL: ‘Processing and mechanical properties of SiC reinforced cast magnesium matrix composites by stir casting process’, Mater. Sci. Eng. A, 2007, A460–A461, 357–364.
   Web of Science ®Google Scholar
• Szaraz Z, Trojanova Z, Cabbibo M, Evangelista E: ‘Strengthening in a WE54 magnesium alloy containing SiC particles’, Mater. Sci. Eng. A, 2007, A462, 225–229.
   Google Scholar