References
- Riccardella P: ‘Weld overlay residual stress validation in nuclear power plant nozzles and penetrations’, Proc. on ‘4th Residual stress summit’, Lake Tahoe, CA, USA, September 2010, Curran Associates, 337–352.
- Cofie NG: ‘Effectiveness of stainless steel buffer layer to address hot cracking during weld overlay repair of dissimilar metal alloy 82/182 welds with stainless steel piping’, Proc. ASME 2008 Pressure Vessels and Piping Conference, Chicago, IL, July 2008, American Society of Mechanical Engineers, PVP2008–61411.
- Shoop U: ‘Catawba nuclear station, unit 2, request for relief 09-CN-002 regarding weld buildup on reactor vessel hot-leg nozzles’, Docket Nos. 50-414, Nuclear Regulatory Commission, Washington, 2009.
- McCracken SL, Smith RE: ‘Behavior and hot cracking susceptibility of filler metal 52M (ERNiCrFe-7A) overlays on cast austenitic stainless steel base materials’ in ‘Hot cracking phenomena in welds III’, T. Bollinghaus, J. Lippold, C. E. Cross, 333–352; 2011, Berlin, Springer.
- Raj B, Jayakumar T, Thavasimuthu M: ‘Practical non-destructive testing’, 2nd edn, 128; 2002, Cambridge, Woodhead Publishing Limited.
- Warner A: ‘Slope control in welding and fusing’, http://www.allem.com/files/SlopePap.pdf
- Savage WF, Nippes EF, Goodwin GM: ‘Effect of minor elements on fusion zone dimensions of Inconel 600’, Weld. J., 1977, 4, 126–132.
- Tinkler MJ, Grant I, Mizuno G, Gluck C: ‘Welding 304L stainless steel tubing having variable penetration characteristics’, Int. Conf., Paper No.29, London, UK, 1983.
- Walsh DW, Demmons A, Gibbs D: ‘The effects of minor elements on bead shapes in Inconel 718’, Proc. 5th Int. Trends in Welding Research Conference, Pine Mountain, GA, USA, June 1998, Vol. 5, 352–356.
- DuPont JN, Lippold JC, Kiser SD: ‘Welding metallurgy and weldability of nickel-base alloys’, 100; 2009, New Jersey, John Wiley & Sons.
- Kou S: ‘Solidification and liquation cracking issues in welding’, JOM, 2003, 55, 37–42.
- McCracken S, Willis E: ‘Alloy 52 weldability & testing; magnetic stir welding; laser & friction stir welding on irradiated material’, NRC/Industry Technical Meeting, Rockville, Maryland, June 2011, Nuclear Regulatory Commission.
- Strauss BM: ‘Fractography in failure analysis’, 38–39; 1978, Pennsylvania, American Society for Testing and Materials.
- Nissley NE, Lippold JC: ‘Ductility-dip cracking susceptibility of nickel-based weld metals part 1: strain-to-fracture testing’, Weld. J., 2008, 87, 257–264.
- Lundin CD, Lee CH, Qiao CYP: ‘Evaluation of backfilled solidification cracks in austenitic stainless welds in relationship to evaluation of hot cracking’, Weld. J, 1993, 72, 321–328.
- Ma D, Jie W, Liu S, Xu W: ‘Solute redistribution and growth velocity response in directional solidification process’, J. Cryst. Growth, 1996, 169, 170–174.