Evaluation of residual plastic strain distribution in dissimilar metal weld by hardness mapping

Reference

• Andresen PL, Ford FP, Gott K, Jones RL, Scott PM, Shoji T, Staehle RW, Tapping RL: ‘Expert panel report on proactive materials degradation assessment’, NUREG/CR-6923, US Nuclear Regulatory Commission, Washington DC, USA, 2007.
   Google Scholar
• Osman T: JOM, 2008, 60, (1), 10–13.
   Google Scholar
• Busby JT, Nanstad RK, Stoller RE, Feng Z, Naus DJ: ‘Materials degradation in light water reactors: life after 60’, ORNL technical report no. TM-2008/170, Oak Ridge National Laboratory, Oak Ridge, TN, USA, 2008.
   Google Scholar
• Gorman J, Hunt S, Riccardella P, White GA: ‘PWR reactor vessel alloy 600 issues’, in ‘Companion guide to the ASME boiler & pressure vessel code’, (ed. , Rao K R, ed), 3rd edn; 2006, New York, ASME.
   Google Scholar
• Brust FW, Scott PM: ‘Weld residual stresses and primary water stress corrosion cracking in bimetal nuclear pipe welds’, Proc. ASME 2007 Pressure Vessels and Piping Conf., San Antonio, TX, USA, July 2007, ASME, 883–897.
   Google Scholar
• Rathbun HJ, Fredette LF, Scott PM, Csontos AA, Rudland DL: ‘NRC welding residual stress validation program international round robin program and findings’, Proc. 2011 ASME Pressure Vessels and Piping Conf., Baltimore, MA, USA, July 2011, ASME, 1539–1545.
   Google Scholar
• Fredette L: ‘NRC/EPRI welding residual stress validation program – phase III details and findings’, Proc. Welding Residual Stress Validation Experts Meet., Rockville, MD, USA, June 2011, EPRI (Electric Power Research Institute), 161–197.
   Google Scholar
• Qiao D, Zhang W, Zhili F: ‘High-temperature constitutive behaviour of austenitic stainless steel for weld residual stress modelling’, Proc. ASME 2012 Pressure Vessels and Piping Conf., Toronto, Ont., Canada, July 2012, ASME, PVP2012–78615.
   Google Scholar
• Richey E, Morton DS, Schurman MK: ‘SCC initiation testing of nickel-based alloys using in-situ monitored uniaxial tensile specimens’, Proc. 12th Int. Conf. on ‘Environmental degradation of materials in nuclear power system – water reactors’, Salt Lake City, UT, USA, August 2005, TMS (The Minerals, Metals & Materials Society), 947–956.
   Google Scholar
• Prime MB: J. Eng. Mater. Technol., 2001, 123, (2), 162–168.
   Web of Science ®Google Scholar
• Leggatt RH, Smith DJ, Smith SD, Faure F: J. Strain Anal. Eng. Des., 1996, 31, (3), 177–186.
   Google Scholar
• Mahmoudi A.-H, Smith DJ, Truman CE, Pavier MJ: ‘Application of the modified deep hole drilling technique (iDHD) for measuring near yield non-axisymmetric residual stresses’, Proc. 2009 ASME Pressure Vessels and Piping Conf., Prague, Czech Republic, July 2009, ASME, 551–558.
   Google Scholar
• Zhang W, Feng Z, Crooker P: Sci. Technol. Weld. Join., 2011, 16, (3), 254–260.
   Google Scholar
• Woo W, Ungár T, Feng Z, Kenik E, Clausen B: Metall. Mater. Trans. A, 2010, 41A, (5), 1210–1216.
   Google Scholar
• Pešička J, Kužel R, Dronhofer A, Eggeler G: Acta Mater., 2003, 51, (16), 4847–4862.
   Google Scholar
• Kamaya M, Wilkinson AJ, Titchmarsh JM: Nucl. Eng. Des., 2005, 235, (6), 713–725.
   Web of Science ®Google Scholar
• Nakane M, Kanno S, Kurosaki S, Takagi Y, Komotori J, Ogawa T: ‘Accuracy of plastic strain estimated by hardness to assess remaining fatigue lives’, Proc. 7th Int. Conf. on ‘NDE in relation to structural integrity for nuclear and pressurized components’, Yokohama, Japan, May 2009, 1423–1430.
   Google Scholar
• Di Schino A, Kenny JM: Mater. Lett., Japan Power Engineering and Inspection Corporation, Tokyo, Japan, 2003, 57, (12), 1830–1834.
   Google Scholar
• Simes T.R., Mellor S.G., Hills D.A., J. Strain Anal. Eng. Des., 1984, 19, (2), 135–137.
   Google Scholar
• Crooker P, Rathbun H: ‘Weld residual stress finite element analysis validation: introduction and overview’, Proc. Welding Residual Stress Validation Experts Meeting, Rockville, MD, USA, June 2011, EPRI (Electric Power Research Institute), 1–5.
   Google Scholar
• Broussard J: ‘Material reliability program: welding residual stress dissimilar metal butt-weld finite element model validation (MRP-316)’, 1022861, EPRI, Palo Alto, CA, USA, 2011.
   Google Scholar
• Special Metals, Inconel alloy 600, 2008.
   Google Scholar
• Sutton MA, Orteu J.-J, Schreier HW: ‘Image correlation for shape, motion and deformation measurements: basic concepts, theory and applications’, New York, NY 10013, USA, 332; 2009, Springer.
   Google Scholar
• Qiao D, Zhang W, Feng Z, Crooker P, Wang Y: ‘Modeling of weld residual plastic strain and stress in dissimilar metal butt weld in nuclear reators’, Proc. ASME 2013 Pressure Vessels and Piping Conf., Paris, France, July 2013, ASME, PVP2013–98081.
   Google Scholar
• Zhang W, Kim CH, DebRoy T: J. Appl. Phys., 2004, 95, (9), 5210–5219.
   Google Scholar
• Zhang W, Kim CH, DebRoy T: J. Appl. Phys., 2004, 95, (9), 5220–5229.
   Google Scholar