References
- Auto/Steel Partnership: ‘Advanced high strength steel applications, design and stamping process guidelines’, Southfield, MI, Jan 2010, e-book available at: http://www.a-sp.org
- World Auto Steel: ‘Advanced high strength steel (AHSS) application guidelines’, Version 4·1, 1–30; June 2009, e-book available at: www.worldautosteel.org
- Campbell, F. C. (ed.): ‘Elements of metallurgy and engineering alloys’, 387–391; 2008, Materials Park, OH, ASM International.
- Bhadeshia, H. K. D. H. and Honeycombe, R. W. K.: ‘Steels: microstructure and properties’, 3rd edn, 220–223; 2006, Cambridge, Oxford, Elsevier.
- Davies, R. G.: ‘The deformation behaviour of a vanadium-strengthened dual phase steel’, Metall. Trans. A, 1978, 9A, 41–52.
- Xia, M., Biro, E., Tian, Z. and Zhou, Y.: ‘Effects of heat input and martensite on HAZ softening in laser welding of dual phase steels’, ISIJ Int., 2008, 48, (6), 809–814.
- Biro, E., McDermid, J., Embury, J. and Zhou, Y.: ‘Softening kinectics in the subcritical heat-affected zone of dual-phase steel welds’, Miner., Met. Mater. Soc. A, 2010, 41A, 2348–2356.
- Xu, W., Westerbaan, D., Nayak, S. S., Chen, D. L., Goodwin, F., Biro, E. and Zhou, Y.: ‘Microstructure and fatige performance of single and multiple linear fiber laser welded DP980 dual-phase steel’, Mater. Sci. Eng. A, 2012, A553, 51–58.
- Xu, W., Westerbaan, D., Nayak, S. S., Chen, D. L., Goodwin, F. and Zhou, Y.: ‘Tensile and fatigue properties of fiber laser welded high strength low alloy’, Mater. Des., 2012, 43, 373–383.
- Farabi, N., Chen, D. L. and Zhou, Y.: ‘Microstructure and mechanical properties of laser welded dissimilar DP600/DP980 dual-phase steel joints’, J. Alloys Compd, 2011, 509, 982–989.
- Farabi, N., Chen, D. L., Li, J., Zhou, Y. and Dong, S.: ‘Microstructure and mechanical properties of laser welded DP600 steel joints’, Mater. Sci. Eng. A, 2010, A527, 1215–1222.
- Anand, D., Chen, D. L., Bhole, S. D., Andreychuck, P. and Boudreau, G.: ‘Fatigue behaviour of tailor (laser)-welded blanks for automotive applications’, Mater. Sci. Eng. A, 2006, A420, 199–207.
- Panda, S. K., Sreenivasan, N., Kuntz, M. and Zhou, Y.: ‘Numerical simulations and experimental results of tensile test behavior of laser butt welded DP980 steels’, J. Eng. Mater. Technol., 2008, 130, 041003-1-9.
- Sreenivisan, N., Xia, M., Lawson, S. and Zhou, Y.: ‘Effect of laser welding on formability of DP980 steel’, J. Eng. Mater. Technol., 2008, 130, 041004-1-9.
- Westerbaan, D., Nayak, S. S., Parkes, D., Xu, W., Chen, D. L., Bhole, S. D., Goodwin, F., Biro, E. and Zhou, N.: ‘Microstructure and mechanical properties of fiber laser welded DP980 and HSLA steels’, Proc. SMWC XV, Detriot, MI, USA, October 2012, AWS, 3/1–13.
- Canning, J.: ‘Fiber lasers and related technologies’, Opt. Lasers Eng., 2005, 44, 645–676.
- Assuncao, E., Quintino, L. and Miranda, R.: ‘Comparative study of laser welding in tailor blanks for the automotive industry’, Int. J. Adv. Manuf. Technol., 2012, 49, 123–131.
- Rooks, B.: ‘Tailor-welded blanks bring multiple benefits to car design’, Assem. Autom., 2001, 21, (4), 323–328.
- Duley, W. W.: ‘Laser welding’, 94–113; 1999, New York, John Wiley & Sons, Inc.
- Sharma, R. S. and Molian, P.: ‘Yb:YAG laser welding of TRIP780 steel with dual phase and mild steels for use in tailor welded blanks’, Mater. Des., 2009, 30, 4146–4155.
- Kawahito, Y., Mizutani, M. and Ktayama, S.: ‘Elucidation of high-power fibre laser welding phenomena of stainless steel and effect of factors on weld geometry’, J. Phys. D: Appl. Phys., 2007, 40, 5854–5859.
- Chan, C. and Mazumder, J.: ‘One-dimensional steady-state model for damage by vaporization and liquid expulsion due to laser-material interaction’, J. Appl. Phys., 1987, 62, (11), 4579–4586.
- Mazumder, J.: ‘Overview of melt dynamics in laser processing’, Opt. Eng., 1991, 30, (8), 1208–1219.
- Dawes, C.: ‘Laser welding’, 117–132; 1992, New York, McGraw-Hill, Inc.
- Ono, M., Yoshitake, A. and Omura, M.: ‘Laser wedlability of high-strength steel sheets in fabrication of tailor welded blanks’, Weld. Int., 2004, 18, (10), 777–784.
- General Motors Co.: ‘Weld specifications for laser welds – butt joints’, GM4485M, General Motors Co., Detriot, MI, USA, 2002.
- ‘Standard test methods for tension testing of metallic materials’, E8/E8M-11, ASTM International, West Conshohocken, PA, USA, 2012.
- ‘Standard practice for conducting force controlled constant amplitude axial fatigue tests of metallic materials’, E466-07, ASTM International, West Conshohocken, PA, USA, 2012.
- Lampman, S. R.: ‘Fatigue and fracture’, Vol. 19, in ‘ASM handbook’, 241–320; 1996, Materials Park, OH, ASM International.