References
- Gebhardt M., Gumenyuk A. and Rethmeier M.: ‘Hybrid process welds — thick-walled tubes’, Weld. J., 2012, 91, 55–61.
- Moore P. L., Howse D. S. and Wallach E. R.: ‘Microstructures and properties of laser/arc hybrid welds and autogeneous laser welds in pipeline steels’, Sci. Technol. Weld. Join., 2004, 9, 314–322.
- Kelly S. M., Brown S. W., Tressler J. F., Martukanitz R. P. and Ludwig M. J.: ‘Laser-arc welding to reduce distortion in ship panels’, Weld. J., 2009, 88, 32–36.
- Reutzel E. W., Sullivan M. J. and Mikesic D. A.: ‘Joining pipe with the hybrid laser-GMAW process: weld test results and cost analysis’, Weld. J., 2006, 85, 66–71.
- Tusek J. and Suban M.: ‘Hybrid welding with arc and laser beam’, Sci. Technol. Weld. Join., 1999, 4, 308–311.
- Mahrle A. and Beyer E.: ‘Hybrid laser beam welding – classification, characteristics and applications’, J. Laser Appl., 2006, 18, 169–178
- Bagger C. and Olsen F.: ‘Review of laser hybrid welding’, J. Laser Appl., 2005, 17, 2–14.
- Olsen F.: ‘Hybrid laser arc welding’; 2009, Cambridge, Woodhead Publishing.
- Ribic B., Palmer T. A. and DebRoy T.: ‘Problems and issues in laser-arc hybrid welding’, Int. Mater. Rev., 2009, 54, 223–244.
- Cross C. E.: ‘On the origin of weld solidification cracking’, in ‘Hot cracking phenomena in welds II’; 2005, Berlin/Heidelberg, Springer Verlag.
- Cross C. E., Coniglio N., Schempp P. and Moussavi M.: ‘Critical conditions for weld solidification crack growth’, in ‘Hot cracking phenomena in welds III’; 2011, Berlin/Heidelberg, Springer Verlag.
- Eskin D. G. and Katgerman L.: ‘A quest for a new hot tearing criterion’, Metall. Mater. Trans. A, 2007, 38A, 1511–1519.
- Borland J. C. and Younger R. N.: ‘Some aspects of cracking in welded Cr–Ni austenitic steels’, Brit. Weld., 1960, 7, 22–59.
- Nishimoto K., Saida K., Kiuchi und K.Nakayama J.: ‘Influence of minor and impurity elements on hot cracking susceptibility of extra high-purity type 310 stainless steels’, in ‘Hot cracking phenomena in welds III’; 2011, Berlin/Heidelberg, Springer Verlag.
- ‘Preliminary guidelines for the approval of CO2 -laser welding, Germanischer Lloyd, 1998.
- Shankar V., Gill T. P. S., Mannan und S. L. Sundaresan S.: ‘Solidification cracking in austenitic stainless steel welds’, Sadhana, 2003, 28, 359–382.
- Rao Z. H., Liao S. M. and Tsai H. L.: ‘Modelling of hybrid laser-GMA welding: review and challenges’, Sci. Technol. Weld. Join., 2011, 16, 300–305
- Weise S.: ‘Heißrissbildung beim Laserstrahlschweißen von Baustählen’, PhD thesis, Universität Bremen, Bremen, Germany, 1998.
- Matsuda F., Nakagawa H. and Ueyama T.: ‘Solidification crack susceptibility in laser beam weld metal of 0·2C-low alloy steel’, Trans. JWRI, 1987, 16, 103–114.
- Fuhrmann C.: ‘Laser-Lichtbogen-Hybridschweißen bis zu Blechdicken von 25 mm’, PhD thesis, RWTH Aachen, Aachen, Germany, 2007.
- Tsukamoto S., Irie und H. Inagaki M.: ‘Welding defects and molten metal behaviour in electron beam welding’, Proc. 4th Int. Symp. of J. Weld. Soc., Osaka, Japan, November 1985, S. 115–120.
- Abe N. and Hayashi M.: ‘Trends in laser arc combination welding methods’, Weld. Int., 2002, 16, 94–98.
- Goos P. and Jones B.: ‘Optimal design of experiments: a case study approach’, 1st edn, 29; 2011, Chichester, John Wiley & Sons.
- ‘Electronic statistics textbook’, http://www.statsoft.com/textbook/experimental-design/?button = 1#general; Tulsa, StatSoft (accessed 2 September 2013).
- Hill T. and Lewicki P.: ‘STATISTICS: methods and applications’, 179–230; 2007, Tulsa, StatSoft.