Review of laser welding monitoring

References

• Chen X. L., Yan H. G., Chen J. H., Su B. and Yu Z. H.: ‘Effects of grain size and precipitation on liquation cracking of AZ61 magnesium alloy laser welding joints’, Sci. Technol. Weld. Join., 2013, 18, 458–465.
   Web of Science ®Google Scholar
• Cui L., Li X. Y., He D. Y., Chen L. and Gong S. L.: ‘Study on microtexture of laser welded 5A90 aluminium–lithium alloys using electron backscattered diffraction’, Sci. Technol. Weld. Join., 2013, 18, 204–209.
   Web of Science ®Google Scholar
• Avilov V. V., Gumenyuk A., Lammers M. and Rethmeier M.: ‘PA position full penetration high power laser beam welding of up to 30 mm thick AlMg3 plates using electromagnetic weld pool support’, Sci. Technol. Weld. Join., 2012, 17, 128–133.
   Web of Science ®Google Scholar
• Kawahito Y., Mizutani M. and Katayama S.: ‘High quality welding of stainless steel with 10 kW high power fibre laser’, Sci. Technol. Weld. Join., 2009, 14, 288–294.
   Web of Science ®Google Scholar
• Zhang Y., Zhang C., Tan L. and Li S.: ‘Coaxial monitoring of the fibre laser lap welding of Zn-coated steel sheets using anauxiliary illuminant’, Opt. Laser Technol., 2013, 50, 167–175.
   Google Scholar
• Ancona A., Spagnolo V., Lugara P. M. and Ferrara M.: ‘Optical sensor for real-time monitoring of CO2 laser welding process’, Appl. Opt., 2001, 40, 6019–6025.
   PubMedGoogle Scholar
• Bertrand P., Smurov I. and Grevey D.: ‘Application of near infrared pyrometry for continuous Nd:YAG laser welding of stainless steel’, Appl. Surf. Sci., 2000, 168, 182–185.
   Google Scholar
• Olsson R., Eriksson I., Powell J., Langtry A. V. and Kaplan A. F. H.: ‘Challenges to the interpretation of the electromagnetic feedback from laser welding’, Opt. Laser Eng., 2011, 49, 188–194.
   Google Scholar
• Wang T., Gao X., Katayama S. and Jin X.: ‘Study of dynamic features of surface plasma in high-power disk laser welding’, Plasma Sci. Technol., 2012, 14, 245–251.
   Google Scholar
• Brock C., Hohenstein R. and Schmidt M.: ‘Towards fast tracking of the keyhole geometry’, Phys. Procedia, 2011, 12, 697–703.
   Google Scholar
• Ohnishi T., Kawahito Y., Mizutani M. and Katayama S.: ‘Butt welding of thick, high strength steel plate with a high power laser and hot wire to improve tolerance to gap variance and control weld metal oxygen content’, Sci. Technol. Weld. Join., 2013, 18, 314–322.
   Web of Science ®Google Scholar
• Gao X., You D. and Katayama S.: ‘Infrared image recognition for seam tracking monitoring during fiber laser welding’, Mechatronics, 2012, 22, 370–380.
   Google Scholar
• Tsukamoto S.: ‘High speed imaging technique Part 2 – High speed imaging of power beam welding phenomena’, Sci. Technol. Weld. Join., 2011, 16, 44–55.
   Web of Science ®Google Scholar
• Sibillano T., Ancona A., Berardi V. and Lugara P. M.: ‘Real-time monitoring of laser welding by correlation analysis: the case of AA5083’, Opt. Laser Eng., 2007, 45, 1005–1009.
   Google Scholar
• ‘Welding-electron and laser-beam welded joints-Guidance on quality levels for imperfections-Part1 Steel’, EN ISO 13919-1, 1997, Section 4, 1–8.
   Google Scholar
• ‘Welding-Electron and laser-beam welded joints-Guidance on quality levels for imperfections-Part2 Aluminium and its weldable alloys’, EN ISO 13919-2, 2001, Section 4, 1–8.
   Google Scholar
• Ilie M., Kneip J. C. and Mattei S.: ‘Through-transmission laser welding of polymers temperature - field modeling and infrared investigation’, Infrar. Phys. Technol., 2007, 51, 73–79.
   Web of Science ®Google Scholar
• Kaierle S., Ungers M. and Abels P.: ‘Understanding the laser process-new approaches for process monitoring in laser materials processing’, Laser Technik J., 2010, 7, 49–52.
   Google Scholar
• Abt F., Wölfelschneider H., Baulig C., Höfler H., Weber R. and Graf T.: ‘Online measurement and closed loop control of penetration depth in laser welding processes’, Proc. Conf. ICALEO 2011, Orlando, FL, USA, 2011, Laser Institute of America, 23–27.
   Google Scholar
• Brock C., Hohenstein R. and Schmidt M.: ‘Optical 3D position sensor for the fast tracking of light sources’, Phys. Proced., 2010, 5, 437–445.
   Google Scholar
• You D., Gao X. and Katayama S.: ‘Multiple-optics sensing of high-brightness disk laser welding process’, NDT & E Int., 2013, 60, 32–39.
   Google Scholar
• Eriksson I., Powell J. and Kaplan A. F. H.: ‘Signal overlap in the monitoring of laser welding’, Meas. Sci. Technol., 2010, 21, 105705.
   Google Scholar
• Chen Y. B., Zhao Y. B., Lei Z. L. and Li L. Q.: ‘Effects of laser induced metal vapour on arc plasma during laser arc double sided welding of 5A06 aluminium alloy’, Sci. Technol. Weld. Join., 2012, 17, 69–76.
   Web of Science ®Google Scholar
• Kong F., Ma J., Carlson B. and Kovacevic R.: ‘Real-time monitoring of laser welding of galvanized high strength steel in lap joint configuration’, Opt. Laser Technol., 2012, 44, 2186–2196.
   Web of Science ®Google Scholar
• You D., Gao X. and Katayama S.: ‘Monitoring of high-power laser welding using high-speed photographing and image processing’, Mech. Syst. Signal Pr., 2013, to be published.
   PubMedGoogle Scholar
• Na X., Zhang Y., Liu Y. S. and Walcott B.: ‘Nonlinear identification of laser welding process’, IEEE Trans. Control Syst. Technol., 2010, 18, 927–934.
   Web of Science ®Google Scholar
• Fang C. K., Kannatey-Asibu E. Jr and Barber J. R.: ‘Far-field initial response of acoustic emission from cracking in a weldment’, J. Manuf. Sci. E, 1997, 119E, 281–289.
   Google Scholar
• Huang W. and Kovacevic R.: ‘Feasibility study of using acoustic signals for online monitoring of the depth of weld in the laser welding of high-strength steels’, Proc. Inst. Mech. Eng. B: J. Eng. Manuf., 2009, 223, 343–361.
   Google Scholar
• Liy L., Brookfieldz D. J. and Steen W. M.: ‘Plasma charge sensor for in-process, non-contact monitoring of the laser welding process’, Meas. Sci. Technol., 1996, 7, 615–626.
   Google Scholar
• Zhang Y. M., Zhang S. B. and Liu Y. C.: ‘A plasma cloud charge sensor for pulse keyhole process control’, Meas. Sci. Technol., 2001, 12, 1365–1370.
   Web of Science ®Google Scholar
• Sibillano T., Ancona A., Berardi V. and Lugara P. M.: ‘Correlation analysis in laser welding plasma’, Opt. Commun., 2005, 251, 139–148.
   Web of Science ®Google Scholar
• Kawahito Y., Kinoshita K., Matsumoto N., Mizutani M. and Katayama S.: ‘Effect of weakly ionised plasma on penetration of stainless steel weld produced with ultra high power density fibre laser’, Sci. Technol. Weld. Join., 2008, 13, 749–753.
   Web of Science ®Google Scholar
• Kawahito Y., Matsumoto N., Mizutani M. and Katayama S.: ‘Characterisation of plasma induced during high power fibre laser welding of stainless steel’, Sci. Technol. Weld. Join., 2008, 13, 744–758.
   Web of Science ®Google Scholar
• Paleocrassas A. G. and Tu J. F.: ‘Inherent instability investigation for low speed laser welding of aluminum using a single-mode fiber laser’, J. Mater. Process. Technol., 2010, 210, 1411–1418.
   Google Scholar
• Zhang X., Chen W., Ashida E. and Matsuda F.: ‘Relationship between weld quality and optical emissions in underwater Nd: YAG laser welding’, Opt. Laser Eng., 2004, 41, 17–730.
   Google Scholar
• Rodil S. S., Gómez R. A. and Peran J. R.: ‘Laser welding defects detection in automotive industry based on radiation and spectroscopical measurements’, Int. J. Adv. Manuf. Technol., 2010, 49, 133–145.
   Google Scholar
• Schmidt M., Otto A. and Kageler C.: ‘Analysis of YAG laser lap-welding of zinc coated steel sheets’, CIRP Annals Manuf. Technol., 2008, 57, 213–216.
   Web of Science ®Google Scholar
• Schmidt M., Albert F., Frick T., Grimm A., Kägeler C., Rank M. and Tangermann-Gerk K.: ‘Process control in laser manufacturing-dream or reality’, Proc. Conf. ICALEO 2007, Orlando, FL, USA, 2007, Laser Institute of America, 1087–1096.
   Google Scholar
• Colombo D. and Previtali B.: ‘Fiber laser welding of titanium alloys and its monitoring through the optical combiner’, Proc. Conf. ICALEO 2009, Orlando, FL, USA, 2009, Laser Institute of America, 620–629.
   Google Scholar
• Molino A., Martina M., et al.: ‘FPGA implementation of time–frequency analysis algorithms for laser welding monitoring’, Microprocess. Microsy., 2009, 33, 179–190.
   Web of Science ®Google Scholar
• D’Angelo G.: ‘Studying the quality of laser welding process using time-frequency distributions with rotated kernel’, Proc. Conf. ICALEO 2008, Temecula, USA, 2008, Laser Institute of America, 807–813.
   Google Scholar
• Alam M. M.: ‘A study of the fatigue behaviour of laser and hybrid laser welds’, Licentiate Thesis, Luleå University of Technology, Luleå, Sweden, 2009.
   Google Scholar
• Eriksson I.: ‘Optical monitoring and analysis of laser welding’, Licentiate Thesis, Luleå University of Technology, Luleå, Sweden, 2011.
   Google Scholar
• Olsson R.: ‘Signal processing and high speed imaging as monitoring tools for pulsed laser welding’, Licentiate Thesis, Luleå University of Technology, Luleå, Sweden, 2009.
   Google Scholar
• Kaplan A. F. H., Norman P. and Eriksson I.: ‘Analysis of the keyhole and weld pool dynamics by imaging evaluation and photodiode monitoring’, Proc. 5th Int Cong. on ‘Laser advanced materials processing’, Kobe, Japan, 2009, 1–6.
   Google Scholar
• Norman P., Karlsson J. and Kaplan A. F. H.: ‘Monitoring undercut, blowouts and root sagging during laser beam welding’, Proc. 5th Int. WLT-Conference on ‘Lasers in manufacturing’, Munich, Germany, 2009, 1–5.
   Google Scholar
• Eriksson I. and Kaplan A. F. H.: ‘Evaluation of laser weld monitoring-a case study’, Proc. Conf. ICALEO 2009, Orlando, FL, USA, 2009, Laser Institute of America, 1419–1425.
   Google Scholar
• Norman P., Eriksson I. and Kaplan A. F. H.: ‘Monitoring laser beam welding of zinc coated sheet metal to analyze the defects occurring’, Proc. NOLAMP Conf., Copenhagen, Denmark, 2009.
   Google Scholar
• Geiger M. and Kageler C.: ‘Michael Schmidt, High-power laser welding of contaminated steel sheets’, Prod. Engineer., 2008, 2, 235–240.
   Google Scholar
• Kawahito Y., Kawasaki M. and Katayama S.: ‘In-process monitoring and adaptive control during micro welding with CW fiber laser’, J. Laser Micro/Nanoeng., 2008, 3, 46–51.
   Google Scholar
• Kawahito Y. and Katayama S.: ‘In-Process monitoring and adaptive control during pulsed YAG laser spot welding of aluminum alloy thin sheets’, J. Laser Micro/Nanoeng., 2006, 1, 33–38.
   Google Scholar
• Kawahito Y., Kito M. and Katayama S.: ‘In-process monitoring and adaptive control for gap in micro butt welding with pulsed YAG laser’, J. Phys. D: Appl. Phys., 2007, 40, 2972–2978.
   Google Scholar
• Kawahito Y., Kito M. and Katayama S.: ‘In-process monitoring and adaptive control for laser spot and seam welding of pure titanium’, J. Laser Micro/Nanoeng., 2006, 1, 269–274.
   Google Scholar
• Kawahitoa Y. and Katayama S.: ‘In-process monitoring and adaptive control for stable production of sound welds in laser microspot lap welding of aluminum alloy’, J. Laser Appl., 2005, 17, 30–37.
   Google Scholar
• Kim C. and Ahn D.: ‘Coaxial monitoring of keyhole during Yb:YAG laser welding’, Opt. Laser Technol., 2012, 44, 1874–1880.
   Web of Science ®Google Scholar
• Kaierle S.: ‘Process monitoring and control of laser beam welding’, Laser Technik J., 2008, 5, 41–43.
   Google Scholar
• Fang Z., Xu D. and Tan M.: ‘A vision-based self-tuning fuzzy controller for fillet weld seam tracking’, IEEE/ASME Trans. Mechatr., 2011, 16, 540–550.
   Web of Science ®Google Scholar
• Xu P., Tang X. and Yao S.: ‘Application of circular laser vision sensor (CLVS) on welded seam tracking’, J. Mater. Process. Technol., 2008, 24, 404–410.
   Google Scholar
• Huissoon J. P.: ‘Robotic laser welding: seam sensor and laser focal frame registration’, Robotica, 2002, 20, 261–268.
   Google Scholar
• Huang R. S., Liu L. M. and Song G.: ‘Infrared temperature measurement and interference analysis of magnesium alloys in hybrid laser-TIG welding process’, Mater. Sci. Eng. A, 2007, A447, 239–243.
   Web of Science ®Google Scholar
• Gao X. and Na S. J.: ‘Seam tracking based on estimation of weld position using Kalman filtering’, Sci. Technol. Weld. Join., 2005, 10, 103–109.
   Google Scholar
• Gao X. and Na S. J.: ‘Detection of weld position and seam tracking based on Kalman filtering of weld pool images’, J. Manuf. Syst., 2005, 24, 1–12.
   Google Scholar
• Gao X., Ding D., Bai T. and Katayama S.: ‘Weld pool image centroid algorithm for seam tracking vision model in arc welding process’, IET Image Process., 2011, 5, 410–419.
   Google Scholar
• Gao X., Mo L., Wen Q. and Katayama S.: ‘Neural network model for recognizing joint offset during fiber laser welding’, Weld. J., 2013, 92, 251–257.
   Web of Science ®Google Scholar
• Gao X., You D. and Katayama S.: ‘Seam tracking monitoring based on adaptive Kalman filter embedded Elman neural network during high-power fiber laser welding’, IEEE Trans. Ind. Electron., 2012, 59, 4315–4325.
   Google Scholar
• Zhang W. J. and Zhang Y. M.: ‘Modeling of human welder response to 3D weld pool surface: part I – principles’, Weld. J., 2012, 91, 310–318.
   Google Scholar
• Zhang W. J. and Zhang Y. M.: ‘Modeling of human welder response to 3D weld pool surface: part II – results and analysis’, Weld. J., 2012, 91, 329–353.
   Google Scholar
• Zhang W. J. and Zhang Y. M.: ‘Dynamic control of the GTAW process using a human welder response model’, Weld. J., 2013, 92, 154–166.
   Google Scholar
• Bardin F., Morgan S. and Williams S.: ‘Process control of laser conduction welding by thermal imaging measurement with a color camera’, Appl. Opt., 2005, 44, 6841–6848.
   PubMed Web of Science ®Google Scholar
• Bardin F., Cobo A. and Lopez-Higuera J. M.: ‘Closed-loop power and focus control of laser welding for full-penetration monitoring’, Appl. Opt., 2005, 44, 13–21.
   PubMedGoogle Scholar
• Sibillano T., Ancona A., Berardi V., Schingaro E., Parente P. and Lugara P. M.: ‘Correlation spectroscopy as a tool for detecting losses of ligand elements in laser welding of aluminium alloys’, Opt. Laser Eng., 2006, 44, 1324–1335.
   Web of Science ®Google Scholar
• Palanco S., Klassen M., Skupin J., Hansen K., Schubert E., Sepold G. and Lasern J. J.: ‘Spectroscopic diagnostics on CW-laser welding plasmas of aluminum alloys’, Spectrochim. Acta B, 2001, 56B, 651–659.
   Google Scholar
• Sebestova H., Chmelickova H. and Nozka L.: ‘Non-destructive real time monitoring of the laser welding process’, J. Mater. Eng. Perform., 2012, 21, 764–769.
   Google Scholar
• Hubera S., Glasschroedera J. and Zaeha M. F.: ‘Analysis of the metal vapour during laser beam welding’, Phys. Procedia, 2011, 12, 712–719.
   Google Scholar
• Sibillano T., Ancona A. and Lugarà P. M.: ‘Optical detection of conduction/keyhole mode transition in laser welding’, J. Mater. Process. Technol., 2007, 191, 364–367.
   Web of Science ®Google Scholar
• Rizzi D., Sibillano T. and Calabrese P. P.: ‘Spectroscopic, energetic and metallographic investigations of the laser lap welding of AISI304 using the response surface methodology’, Opt. Laser Eng., 2011, 49, 892–898.
   Google Scholar
• Zeng H., Zhou Z. D. and Chen Y. P.: ‘Wavelet analysis of acoustic emission signals and quality control in laser welding’, J. Laser Appl., 2001, 13, 167–173.
   Google Scholar
• Luo H., Zeng H. and Hu L. J.: ‘Application of artificial neural network in laser welding defect diagnosis’, J. Mater. Process. Technol., 2005, 170, 403–411.
   Web of Science ®Google Scholar
• Huang W. and Kovacevic R.: ‘Acoustic Monitoring of weld penetration during laser welding of high strength steels’, Proc. Conf. ICALEO 2009, Orlando, FL, USA, 2009, Laser Institute of America, 630–637.
   Google Scholar
• Huang W. and Kovacevic R.: ‘A neural network and multiple regression method for the characterization of the depth of weld penetration in laser welding based on acoustic signatures’, J. Intell. Manuf., 2011, 22, 131–143.
   Google Scholar
• Smurov I.: ‘Laser process optical sensing and control’, IV International WLT-Conference on Lasers in Manufacturing, 2007, 537–546.
   Google Scholar
• Doubenskaia M., Bertrand Ph., Pinon H. and Smurov I.: ‘On-line optical monitoring of Nd:YAG laser lap welding of Zn-coated steel sheets’, IV International WLT-Conference on Lasers in Manufacturing, 2007, 547–552.
   Google Scholar
• Lu W., Zhang Y. M. and Emmerson John: ‘Sensing of weld pool surface using non-transferred plasma charge sensor’, Meas. Sci. Technol., 2004, 15, 991–999.
   Google Scholar
• Trushnikov D., Belenkiy V., Shchavlev V., Piskunov A., Abdullin A. and Mladenov G.: ‘Plasma charge current for controlling and monitoring electron beam welding with beam oscillation’, Sensors, 2012, 12, 17433–17445.
   PubMed Web of Science ®Google Scholar
• Liu L. M., Yuan S. T. and Li C. B.: ‘Effect of relative location of laser beam and TIG arc in different hybrid welding modes’, Sci. Technol. Weld. Join., 2012, 17, 441–446.
   Web of Science ®Google Scholar
• Sforza P. and Blasiis D. D.: ‘On-line optical monitoring system for arc welding’, NDT & E Int., 2002, 35, 37–43.
   Web of Science ®Google Scholar
• Kamimuki K., Inoue T. and Yasuda K.: ‘Behaviour of monitoring signals during detection of welding defects in YAG laser welding. Study of monitoring technology for YAG laser welding (Report 2)’, Weld. Int., 2003, 17, 203–210.
   Google Scholar
• Nakamura S., Sakurai M. and Kamimuki K.: ‘Detection technique for transition between deep penetration mode and shallow penetration mode in CO2 laser welding of metals’, J. Phys. D: Appl. Phys., 2000, 33, 2941–2948.
   Google Scholar
• Zhang P., Kong L., et al.: ‘Real-time monitoring of laser welding based on multiple sensors’, Proc. Control and Decision Conf., Beijing, China, 2008, 1746–1748.
   Google Scholar
• Shibahara M., Ikushima K. and Itoh S.: ‘Development of in situ measurement system for welding deformation using digital cameras’, Sci. Technol. Weld. Join., 2012, 17, 511–517.
   Web of Science ®Google Scholar
• Dorsch F., Braun H., Keßler S., Pfitzner D. and Volker Rominger : ‘Detection of faults in laser beam welds by near-infrared camera observation’, Proc. Conf. ICALEO 2012, Anaheim, USA, 2012, Laser Institute of America, 212–219.
   Google Scholar
• Braun H., Dorsch F., Keßler S., Pfitzner D. and Rominger V.: ‘Camera-based laser beam welding sensor in the near-infrared spectral range’, Proc. Conf. 2011, Orlando, FL, USA, 2011, Laser Institute of America, 80–84.
   Google Scholar
• Dorsch F., Braun H., Keßler S. and Magg W.: ‘Process sensor systems for laser beam welding’, Laser Technik J., 2012, 9, 24–28.
   Google Scholar
• Karlsson J., Ilar T. and Kaplan A. F. H.: ‘Knowledge platform approach for fiberlaser welding of high strength steel’, Proc. 12th NOLAMP Conf., Copenhagen, Denmark, 2009, 1–15.
   Google Scholar
• Norman P., Engström H., Gren P. and Kaplan A. F. H.: ‘Correlation between photodiode monitoring and high speed imaging of the dynamics causing laser welding defects’, Proc. Conf. ICALEO 2008, Temecula, USA, 2008, Laser Institute of America, 829–837.
   Google Scholar
• Gedicke J., Regaard B., Klages K., Olowinsky A. and Kaierle S.: ‘Comparison of different process monitoring methods for laser beam micro welding’, Proc. Conf. ICALEO 2006, Scottsdale, USA, 2006, Laser Institute of America, 262–268.
   Google Scholar
• Andreev A.: ‘Smart laser welding heads provide excellent quality’, Laser Technik J., 2009, 6, 20–22.
   Google Scholar
• Mickel P. M., Kuhl M. and Seidel M.: ‘Quality and process control of laser welding using multisensory systems and methods of pattern recognition’, Proc. LANE, Germany, 2007, 957–966
   Google Scholar
• Travis D., Dearden G., Watkins K. G., Reutzel E. W., Martukanitz R. P. and Tressler J. F.: ‘Sensing for monitoring of the laser-GMAW hybrid welding process’, Proc. Conf. ICALEO 2004, Orlando, FL, USA, 2004, Laser Institute of America, 33–40.
   Google Scholar
• Tönshoff H. K., Körber K., Hesse T. and Stallmach M.: ‘Increased performance and flexibility of process monitoring for deep penetration laser welding’, Proc. Conf. ICALEO 2002, Scottsdale, USA, 2002, Laser Institute of America, 1105–1113.
   Google Scholar
• Gao X., Mo L., Zhong X., You D. and Katayama S.: ‘Detection of seam tracking offset based on infrared image during high-power fiber laser welding’, Acta Phys. Sin., 2011, 60, 088105-1-8.
   Google Scholar
• Gao X., Long G., Wang R. and Katayama S.: ‘Analysis of characteristics of spatters during high-power disk laser welding’, Acta Phys. Sin., 2012, 61, 098103-1-8.
   Google Scholar
• Gao X., Wang R., Long G. and Katayama S.: ‘Study of characteristics of plume based on hue-saturation-intensity during high-power disk laser welding’, Acta Phys. Sin., 2012, 61, 148103-1-8.
   Google Scholar
• Olsson R., Eriksson I., Powell J. and Kaplan A. F. H.: ‘Pulsed laser weld quality monitoring by the statistical analysis of reflected light’, Proc. WLT Conf. on ‘Lasers in manufacturing’, Munich, Germany, 2009, 1–6.
   Google Scholar
• Alfaro S. C. A. and Franco F. D.: ‘Exploring infrared sensoring for real time welding defects monitoring in GTAW’, Sensors, 2010, 10, 5962–5974.
   PubMed Web of Science ®Google Scholar
• Gao X., Zhong X., You D.,, Katayama S.: ‘Kalman filtering compensated by radial basis function neural network for seam tracking of laser welding’, IEEE Trans. Contr. Syst. T., 2013, 21, 1–8.
   Google Scholar
• Park Y. W., Park H., Rhee S., Kang M.: ‘Real time estimation of CO2 laser weld quality for automotive industry’, Opt. Laser Technol., 2002, 34, 135–142.
   Google Scholar
• Park H., Rhee S., Kim D.: ‘A fuzzy pattern recognition based system for monitoring laser weld quality’, Meas. Sci. Technol., 2001, 12, 1318–1324.
   Web of Science ®Google Scholar
• Naso D., Turchiano B. and Pantaleo P.: ‘A fuzzy-logic based optical sensor for online weld defect-detection industrial informatics’, IEEE Trans. Ind. Inform., 2005, 1, 259–273.
   Web of Science ®Google Scholar
• Graaf M. W., Benneker J. O., Aarts R. G. K. M, Meijer J. and Jonker J. B.: ‘Robust process-controller for Nd: YAG welding’, Proc. Conf. ICALEO 2005, Miami, USA, 2005, Laser Institute of America, 1806.
   Google Scholar
• Jauregui J. M., Aalderink B. J., Aarts R. G. K. M., Olde Benneker J. and Meijer J.: ‘Design, implementation and testing of a fuzzy control scheme for laser welding’, J. Laser Appl., 2008, 20, 146–153.
   Google Scholar
• Konuk A. R., Aarts R., Veld B. H., Sibillano T., Rizzi D. and Ancona A.: ‘Closed loop control of laser welding using an optical spectroscopic sensor for ND:YAG and CO2 laser’, Proc. Conf. ICALEO 2011, Orlando, USA, 2011, Laser Institute of America, 85–94.
   Google Scholar
• Kawahito Y., Ohnishi T. and Katayama S.: ‘In-process monitoring and feedback control for stable production of full-penetration weld in continuous wave fibre laser welding’, J. Phys. D: Appl. Phys., 2009, 42, 1–8.
   Web of Science ®Google Scholar
• Kawahito Y. and Katayama S.: ‘In-process monitoring and feedback control during laser microspot lap welding of copper sheets’, J. Laser Appl., 2004, 16, 121–127.
   Google Scholar