References
- Charles J.: ‘Duplex stainless steels, a review after DSS’ 07 held in Grado’, Proc. Stainless Steel World Conf. 2007, Maastricht, The Netherlands, November 2007, KCI Publishing, Paper K05.
- Karlsson L.: ‘Welding of duplex stainless steels – a review of current recommendations’, Weld. World, 2012, 56, (5/6), 65–76.
- Karlsson L. and Arcini H.: ‘Low energy input welding of duplex stainless steels’, Weld. World, 2012, 56, (9/10), 41–47.
- Karlsson L. and Tolling J.: ‘Experiences and new possibilities in welding duplex stainless steels’, Proc. IIW Regional Cong. on ‘Welding and related inspection technologies’, Stellenbosch, South Africa, March 2006, Southern African Institute of Welding.
- Westin E. M., Stelling K. and Gumenyuk A.: ‘Single-pass laser-GMA hybrid welding of 13·5 mm thick duplex stainless steel’, Weld. World, 2011, 55, (1–2), 39–49.
- Abtibol Menezes J. W., Abreu H., Kundu S., Bhadeshia H. K. D. H. and Kelly P. M.: ‘Crystallography of Widmanstätten austenite in duplex stainless steel weld metal’, Sci. Technol. Weld. Join., 2009, 14, (1), 4–10.
- Ogawa T. and Koseki T.: ‘Effect of composition profiles on metallurgy and corrosion behavior of duplex stainless steel weld metals’, Weld. J., 1989, 68, (5), 181s–191s.
- Westin E.: ‘Microstructure and properties of welds in the lean duplex stainless steel LDX 2101’, PhD thesis, Royal Institute of Technology, Stockholm, Sweden, 2010, Paper E.
- Ramirez A. J., Lippold J. C. and Brandi S. D.: ‘The relationship between chromium nitride and secondary austenite precipitation in duplex stainless steels’, Metall. Mater. Trans. A, 2003, 34A, (8), 1575–1597.
- Nilsson J.-O.: ‘Super duplex stainless steels’, Mater. Sci. Technol., 1992, 8, 685–700.
- Karlsson L.: ‘Review: Intermetallic phase precipitation in duplex stainless steels and weld metals – metallurgy, influence on properties, welding and testing aspects’, Weld. World, 1999, 43, (5), 20–41.
- Karlsson L., Arcini H., Bergquist E.-L., Weidow J. and Börjesson J.: ‘Effects of alloying concepts on ferrite morphology and toughness of lean duplex stainless steel weld metals’, Weld. World, 2010, 54, (11/12), R350–R359.
- Liu H. and Jin X.: ‘Secondary austenite morphologies in fusion zone of welded joint after postweld heat treatment with a continuous wave laser’, Mater. Sci. Technol., 2012, 28, (3), 249–254.
- Nilsson J.-O., Karlsson L. and Andersson J.-O.: ‘Secondary austenite formation in duplex stainless steel weld metal and its relation to pitting corrosion’, Mater. Sci. Technol., 1995, 11, 276–283.
- Chen T. H. and Yang J. R.: ‘Microstructural characterization of simulated heat affected zone in a nitrogen-containing 2205 duplex stainless steel’, Mater. Sci. Eng. A, 2002, A338, (1–2), 166–181,
- Chen C. Y., Yen H. W. and Yang J. R.: ‘Sympathetic nucleation of austenite in a Fe–22Cr–5Ni duplex stainless steel’, Scr. Mater., 2007, 56, (8), 673–676.
- Monlevade E., Goldenstein H. and Falleiros I.: ‘Intragranular formation of austenite during delta ferrite decomposition in a duplex stainless steel’ J. Mater. Sci., 2010, 45, (18), 5089–5093.
- Bhadeshia H. K. D. H.: ‘Bainite in steels’, 2nd edn, 36, 58; 2001, Cambridge, Cambridge University Press.
- Kotecki D. J. and Siewert T. A.: ‘WRC-1992 constitution diagram for stainless steel weld metals: a modification of the WRC-1988 diagram’, Weld. J., 1992, 71, (5), 171s–178s.