Internal residual stress measurement on inertia friction welding of nickel-based superalloy

References

• Huang ZW, Li HY, Preuss M, Karadge M, Bowen P, Bray S and Baxter G: ‘Inertia friction welding dissimilar nickel-based superalloys alloy 720Li to IN718’, Metall. Mater. Trans. A, 2007, 38A, (7), 1608–1620.
   Google Scholar
• Preuss M, Pang JWL, Withers PJ and Baxter GJ: ‘Inertia welding nickel-based superalloy: Part I. Metallurgical characterization’, Metall. Mater. Trans. A, 2002, 33A, 3215–3225.
   Web of Science ®Google Scholar
• Preuss M, Pang JWL, Withers PJ and Baxter GJ: ‘Inertia welding nickel-based superalloy: Part II. Residual stress characterization’, Metall. Mater. Trans. A, 2002, 33A, 3227–3234.
   Web of Science ®Google Scholar
• Rossini NS, Dassisti M, Benyounis KY and Olabi AG: ‘Methods of measuring residual stresses in components’, Mater. Des., 2012, 35, 572–588.
   Web of Science ®Google Scholar
• Moat RJ, Hughes DJ, Steuwer A, Iqbal N, Preuss M, Bray SE and Rawson M: ‘Residual stresses in inertia-friction-welded dissimilar high-strength steels’, Metall. Mater. Trans. A, 2009, 40A, (9), 2098–2108.
   Google Scholar
• Preuss M, Withers PJ and Baxter GJ: ‘A comparison of inertia friction welds in three nickel base superalloys’, Mater. Sci. Eng. A, 2006, A437, (1), 38–45
   Google Scholar
• Iqbal N, Rolph J, Moat R, Hughes D, Hofmann M, Kellerher J, Baxter G, Withers PJ and Preuss M: ‘A comparison of residual stress development in inertia friction welded fine grain and coarse grain nickel-base superalloy’, Metall. Mater. Trans. A, 2011, 42A, (13), 4056–4063.
   Google Scholar
• Karadge M, Grant B, Withers PJ, Baxter G and Preuss M: ‘Thermal relaxation of residual stresses in nickel-based superalloy inertia friction welds’, Metall. Mater. Trans. A, 2011, 42A, (8), 2301–2311.
   Google Scholar
• Hosseinzadeh F and Bouchard PJ: ‘Mapping multiple components of the residual stress tensor in a large P91 steel pipe girth weld using a single contour cut’, Exp. Mech., 2013, 53, (2), 171–181.
   Google Scholar
• Smith DJ, Bouchard PJ and George D: ‘Measurement and prediction of residual stresses in thick-section welds’, J. Strain Anal. Eng. Des., 2000, 35, (4), 287–305.
   Web of Science ®Google Scholar
• Prime MB: ‘Cross-sectional mapping of residual stresses by measuring the surface contour after a cut’, J. Eng. Mater. Technol., 2001, 123, (2), 162–168.
   Web of Science ®Google Scholar
• Liu C and Zhuang D: ‘Inner welding residual stress measurement based on contour method’, J. Mech. Eng., 2012, 48, (8), 54–59.
   Google Scholar
• Richter-Trummer V, Suzano E, Beltrão M, Roos A, dos Santos J and de Castro P: ‘Influence of the FSW clamping force on the final distortion and residual stress field’, Mater. Sci. Eng. A, 2012, A538, 81–88.
   Google Scholar
• Prime MB, Gnäupel-Herold T, Baumann JA, Lederich RJ, Dowden DM and Sebring RJ: ‘Residual stress measurements in a thick, dissimilar aluminum alloy friction stir weld’, Acta Mater., 2006, 54, (15), 4013–4021.
   Google Scholar
• Liu C and Yi X: ‘Residual stress measurement on AA6061-T6 aluminum alloy friction stir butt welds using contour method’, Mater. Des., 2013, 46, 366–371.
   Google Scholar
• Zhang Y, Ganguly S, Edwards L and Fitzpatrick ME: ‘Cross-sectional mapping of residual stresses in a VPPA weld using the contour method’, Acta Mater., 2004, 52, (7), 5225–5232.
   Google Scholar
• Brown DW, Holden TM, Clausen B, Prime MB, Sisneros TA, Swenson H and Vaja J: ‘Critical comparison of two independent measurements of residual stress in an electron-beam welded uranium cylinder: neutron diffraction and the contour method’, Acta Mater., 2011, 59, (3), 864–873.
   Google Scholar
• Frankel P, Preuss M, Steuwer A, Withers PJ and Bray S: ‘Comparison of residual stresses in Ti–6Al–4V and Ti–6Al–2Sn–4Zr–2Mo linear friction welds’, Mater. Sci. Technol., 2009, 25, (5), 640–650.
   Web of Science ®Google Scholar
• Johnson G: ‘Residual stress measurements using the contour method’, University of Manchester, Manchester, UK, 2008.
   Google Scholar
• Woo W, An GB, Kingston EJ, DeWald AT, Smith DJ and Hill MR: ‘Through-thickness distributions of residual stresses in two extreme heat-input thick welds: a neutron diffraction, contour method and deep hole drilling study’, Acta Mater., 2013, 61, (10), 3564–3574.
   Google Scholar
• Pagliaro P, Prime MB, Swenson H and Zuccarello B: ‘Measuring multiple residual-stress components using the contour method and multiple cuts’, Exp. Mech., 2010, 50, (2), 187–194.
   Google Scholar
• Dewald AT, Rankin JE, Hill MR, Lee MJ and Chen HL: ‘Assessment of tensile residual stress mitigation in alloy 22 welds due to laser peening’, J. Eng. Mater. Technol., 2004, 126, (4), 465–472.
   Google Scholar
• Prime MB, Sebring RJ, Edwards JM, Hughes DJ and Webster PJ: ‘Laser surface contouring and spline data-smoothing for residual stress measurement’, Exp. Mech., 2004, 44, (2), 176–84.
   Google Scholar
• Turski M and Edwards L: ‘Residual stress measurement of a 316L stainless steel bead-on-plate specimen utilising the contour method’, Int. J. Pres. Ves. Pip., 2009, 86, (1), 126–131.
   Google Scholar
• Hosseinzadeh F, Ledgard P and Bouchard PJ: ‘Controlling the cut in contour residual stress measurements of electron beam welded Ti–6Al–4V alloy plates’, Exp. Mech., 2013, 53, (5), 829–839.
   Google Scholar
• Chinese Aerial Materials Editorial Committee: ‘The handbook of Chinese aerial materials’, 44; 2002, Beijing, China Standard Publication Co..
   Google Scholar
• Attallah MM, Preuss M, Boonchareonc C, Steuwer A, Daniels JE, Hughes DJ, Dungey C and Aaxter GJ: ‘Microstructural and residual stress development due to inertia friction welding in Ti-6246’, Metall. Mater. Trans. A, 2012, 43A, (9), 3149–3161.
   Google Scholar
• Grant B, Preuss M, Withers PJ, Baxter G and Rowlson M: ‘Finite element process modelling of inertia friction welding advanced nickel-based superalloy’, Mater. Sci. Eng. A, 2009, A513–A514, 366–375.
   Google Scholar
• Li JY, Qiu S and Qiu CL: ‘The asymmetry of inertia friction welding joints’, Proc. 18th Natl Academic Conf. on ‘Welding’, Changsha, China, October 2013, Chinese Mechanical Engineering Society, 44–48.
   Google Scholar
• Pang JWL, Preuss M, Withers PJ, Baxter GJ and Small C: ‘Effects of tooling on the residual stress distribution in an inertia weld’, Mater. Sci. Eng. A, 2003, A356, (1–2), 405–413.
   Google Scholar