References
- Ferrasse S, Verrier P and Meesemaecker F: Weld. World, 1998, 41, (3), 177–195.
- Yamazaki K, Sato K and Tokunaga Y: Weld. Int., 2000, 14, (7), 533–541.
- Pouranvari M and Marashi SPH: Sci. Technol. Weld. Join., 2013, 18, (5), 361–403.
- Lienert TJ, Stellwag WL, Grimmett BB and Warke RW: Weld. J., 2003, 82, 1s–9s.
- Reynolds AP, Tang W, Posada M and DeLoach J: Sci. Technol. Weld. Join., 2003, 8, (6), 455–460.
- Konkol PJ, Mathers CJA, Johnson R and Pickens JR: J. Ship Prod., 2003, 19, 159–164.
- Hirano S, Okamoto K, Aota K and Inagaki M: ‘Metallurgical and mechanical properties of friction stir welded ultra-fine grained steel’, Proc. 5th Int. Symp. on ‘Friction stir welding’, Meta, France, September 2004, TWI. Paper No: P28, ISBN No: 1903761042.
- Ozekcin A, Jin HW, Koo JY, Bangaru NV and Ayer R: Int. J. Offshore Polar Eng., 2004, 14, (4), 284–288.
- Ueji R, Fujii H, Cui L, Nishioka A, Kunishige K and Nogi K: Mater. Sci. Eng. A, 2006, A423, (1–2), 324–330.
- Haagensen PJ, Midling OT and Ranes M: Proc. 2nd Int. Conf. on ‘Computer methods and experimental measurements for surface treatment effects’, Milan, Italy, June 1995, Wessex Institute of Technology, 225–237.
- Lienert TJ, Grylls RJ, Gould JE and Fraser HL: Proc. 2nd Symp. held at the 1998 TMS Fall Meet.: ‘Hot deformation of aluminum alloys’, Rosemont, IL, USA, October 1998, TMS, 159–167.
- Kinchen DG, Li Z and Adams GP: Proc. 1st Int. Conf. on ‘Friction stir welding’, ‘Mechanical properties of friction stir welds in Al-Li 2195-T8’. Format: CD-ROM. Thousand Oaks, CA, USA, June 1999, TWI.
- Miles MP, Nelson TW, Steel R, Olsen E and Gallagher M: Sci. Technol. Weld. Join., 2009, 14, (3), 228–232.
- Lin PC, Lin SH, Pan J, Pan T, Nicholson JM and Garman MA: SAE Tech. Pap., 2004, 2004-01-1330.
- Yuan W, Mishra RS, Webb S, Chen YL, Carlson B, Herling DR and Grant GJ: J. Mater. Process. Technol., 2011, 211, (6), 972–977.
- Arul SG, Pan TY, Lin PC, Pan J, Feng Z and Santella ML: SAE Tech. Pap., 2005, 2005-01-1256.
- Lathabai S, Painter MJ, Cantin GMD and Tyagi VK: Scr. Mater., 2006, 55, (10), 899–902.
- Mitlin D, Radmilovic V, Pan T, Chen J, Feng Z and Santella ML: Mater. Sci. Eng. A, 2006, A441, (1–2), 79–96.
- Wang DA and Lee SC: J. Mater. Process. Technol., 2007, 186, (1–3), 291–297.
- Gerlich A, Su P, Yamamoto M and North T: J. Mater. Sci., 2007, 42, (14), 5589–5601.
- Tozaki Y, Uematsu Y and Tokaji K: Int. J. Mach. Tools Manuf., 2007, 47, (15), 2230–2236.
- Santella M, Hovanski Y, Frederick A, Grant G and Dahl M: Sci. Technol. Weld. Join., 2010, 15, (4), 271–278.
- Feng Z, Santella ML, David SA, Steel RJ, Packer SM, Pan T, Kuo M and Bhatnagar RS: SAE Tech. Pap., 2005, 2005-01-1248.
- Hovanski Y, Santella ML and Grant GJ: Scr. Mater., 2007, 57, (9), 873–876.
- Aota K and Ikeuchi K: Weld. Int., 2009, 23, (8), 572–580.
- Khan MI, Kuntz ML, Su P, Gerlich A, North T and Zhou Y: Sci. Technol. Weld. Join., 2007, 12, (2), 175–182.
- Ohashi R, Fujimoto M, Mironov S, Sato YS and Kokawa H: Sci. Technol. Weld. Join., 2009, 14, (3), 221–227.
- Miles MP, Ridges CS, Hovanski Y, Peterson J, Santella ML and Steel R: Sci. Technol. Weld. Join., 2011, 16, (7), 642–647.
- Cui L, Fujii H, Tsuji N and Nogi K: Scr. Mater., 2007, 56, (7), 637–640.
- Chung YD, Fujii H, Ueji R and Tsuji N: Scr. Mater., 2010, 63, 223–226.
- Reynolds AP, Tang W, Gnaupel-Herold T and Prask H: Scr. Mater., 2003, 48, (9), 1289–1294.
- Ghosh M, Kumar K and Mishra RS: Mater. Sci. Eng. A, 2011, A528, (28), 8111–8119.
- Rodrigues P, Paula AS and Campos MF: ‘Mechanical behaviour and microstructural evolution during hot rolling in pilot scale of low carbon steels with Mn additions’, Proc. 6th Brazilian Conf. on ‘Manufacturing engineering’, Caxias do Sul, RS, Brazil, April 2011, Associação Brasileira de Engenharia e Ciências Mecânicas, http://alvarestech.com/temp/cobef2011/grima.ufsc.br/cobef2011/media/trabalhos/COF11-0189.pdf
- Chatterjee S, Wang HS, Yang JR and Bhadeshia HKDH: Mater. Sci. Technol., 2006, 22, 641–644.
- Hickson MR, Hurley PJ, Gibbs RK, Kelly GL and Hodgson PD: Metall. Mater. Trans. A, 2002, 33A, 1019–1026.
- Fujii H, Cui L, Tsuji N, Maeda M, Nakata K and Nogi K: Mater. Sci. Eng. A, 2006, A429, 50–57.
- Babu SS: Curr. Opin. Solid State Mater. Sci., 2004, 8, 267–278.
- Dallam CB and Olson DL: Weld. J., 1989, 68, 198–205.
- Irie T, Satoh S, Hasiguchi K, Takahashi I and Hashimoto O: ‘Metallurgical factors affecting the formability of cold-rolled high strength steel sheets’, Proc. 100th ISIJ Meet., Fukuoka, Japan, October 1980, Kyushu University, 793–801.