Flux modification for AC-TIG braze welding of aluminium to stainless steel

References

• Agudo L, Eyidi D, Schmaranzer CH, Arenholz E, Jank N, Bruckner J and Pyzalla AR: ‘Intermetallic FexAly-phases in a steel/Al-alloy fusion weld’, J. Mater. Sci., 2007, 42, (12), 4205–4214.
   Web of Science ®Google Scholar
• Naimon ER, Doyle JH, Rice CR, Vigil D and Walmsley DR: ‘Diffusion welding of aluminum to stainless-steel’, Weld. J., 1981, 60, (11), 17–20.
   Web of Science ®Google Scholar
• Kimura M, Ishii H, Kusaka M, Kaizu K and Fuji A: ‘Joining phenomena and joint strength of friction welded joint between aluminium-magnesium alloy (AA5052) and low carbon steel’, Sci. Technol. Weld. Join., 2009, 14, (7), 655–661.
   Web of Science ®Google Scholar
• Kimura M, Ishii H, Kusaka M, Kaizu K and Fuji A: ‘Joining phenomena and joint strength of friction welded joint between pure aluminium and low carbon steel’, Sci. Technol. Weld. Join., 2009, 14, (5), 388–395.
   Web of Science ®Google Scholar
• Chen T and Lin WB: ‘Optimal FSW process parameters for interface and welded zone toughness of dissimilar aluminium-steel joint’, Sci. Technol. Weld. Join., 2010, 15, (4), 279–285.
   Web of Science ®Google Scholar
• Movahedi M, Kokabi AH, Reihani SMS and Najafi H: ‘Effect of tool travel and rotation speeds on weld zone defects and joint strength of aluminium steel lap joints made by friction stir welding’, Sci. Technol. Weld. Join., 2012, 17, (2), 162–167.
   Web of Science ®Google Scholar
• Ogura T, Nishida T, Tanaka Y, Nishida H, Yoshikawa S, Fujimoto M and Hirose A: ‘Microscale evaluation of mechanical properties of friction stir welded A6061 aluminium alloy/304 stainless steel dissimilar lap joint’, Sci. Technol. Weld. Join., 2013, 18, (2), 108–113.
   Web of Science ®Google Scholar
• Saida K, Song W and Nishimoto K: ‘Diode laser brazing of aluminium alloy to steels with aluminium filler metal’, Sci. Technol. Weld. Join., 2005, 10, (2), 227–235.
   Web of Science ®Google Scholar
• Roulin M, Luster J, Karadeniz G and Mortensen A: ‘Strength and structure of furnace-brazed joints between aluminum and stainless steel’, Weld. J., 1999, 78, (5), 151–155.
   Web of Science ®Google Scholar
• El-Sayed M and Naka M: ‘Structure and properties of carbon steel-aluminium dissimilar joints’, Sci. Technol. Weld. Join., 2005, 10, (1), 27–31.
   Web of Science ®Google Scholar
• Sierra G, Peyre P, Beaume FD, Stuart D and Fras G: ‘Steel to aluminium braze welding by laser process with Al-12Si filler wire’, Sci. Technol. Weld. Join., 2008, 13, (5), 430–437.
   Web of Science ®Google Scholar
• Bach FW, Beniyash A, Lau K and Versemann R: ‘Joining of steel-aluminium hybrid structures with electron beam on atmosphere’, Adv. Mater. Res., 2005, 6, 143–150.
   Google Scholar
• Laukant H, Wallmann C, Müller M, Korte M, Stirn B, Haldenwanger HG and Glatzel U: ‘Fluxless laser beam joining of aluminium with zinc coated steel’, Sci. Technol. Weld. Join., 2005, 10, (2), 219–226.
   Web of Science ®Google Scholar
• Song J, Lin S, Yang C, Fan C and Ma G: ‘Analysis of intermetallic layer in dissimilar TIG welding-brazing butt joint of aluminium alloy to stainless steel’, Sci. Technol. Weld. Join., 2010, 15, (3), 213–218.
   Web of Science ®Google Scholar
• Cooke W, Wright T and Hirschfield J: ‘Furnace brazing of aluminum with a non-corrosive flux’, Weld. J., 1978, 57, (12), 23–28.
   Web of Science ®Google Scholar
• Liu J: ‘Nocolok flux and aluminum brazing’, SAE Technical Paper 960244, 1996.
   Google Scholar
• Field DJ and Steward NI: ‘Mechanistic aspects of the Nocolok flux brazing process’, Society of Automotive Engineers, 1987.
   Google Scholar
• Swidersky HW: ‘Aluminium brazing with non-corrosive fluxes-state of the art and trends in NOCOLOK® flux technology’, DVS BERICHTE, 2001, 212, 164–169.
   Google Scholar
• Rathod M and Kutsuna M: ‘Joining of aluminum alloy 5052 and low-carbon steel by laser roll welding’, Weld. J., 2004, 83, (1), 16-s–26-s.
   Web of Science ®Google Scholar
• Song JL, Lin SB, Yang CL, Ma GC and Liu H: ‘Spreading behavior and microstructure characteristics of dissimilar metals TIG welding-brazing of aluminum alloy to stainless steel’, Mater. Sci. Eng. A, 2009, A509, (1–2), 31–40.
   Google Scholar
• Dong H, Liao C, Chen G and Dong C: ‘Butt Joining of aluminum to steel by arc brazing process’, Mater. Manuf. Process., 2012, 27, (12), 1392–1396.
   Web of Science ®Google Scholar
• Lin S, Song J, Yang C and Ma G: ‘Metallurgical and mechanical investigations of aluminium-steel butt joint made by tungsten inert gas welding-brazing’, Sci. Technol. Weld. Join., 2009, 14, (7), 636–639.
   Web of Science ®Google Scholar
• Tashiro S, Miyata M and Tanaka M: ‘Numerical analysis of AC tungsten inert gas welding of aluminum plate in consideration of oxide layer cleaning’, Thin Solid Films, 2011, 519, (20), 7025–7029.
   Web of Science ®Google Scholar
• Pokhodnya I, Starodubtsev L and Gorpenyuk V: ‘The emission of electrons and positive ions from a weld pool and the stability of A. C. Arc Burn’, Arc Phys. Weld Pool Behav., 1979, 87–92.
   Google Scholar
• Trigwell S, Captain JG, Arens EE, Quinn JW and Calle CI: ‘The use of tribocharging in the electrostatic beneficiation of lunar simulant’, Industry Appl. IEEE Trans., 2009, 45, (3), 1060–1067.
   Web of Science ®Google Scholar
• Jacobson DM and Humpston G: ‘Principles of brazing’, 2005, Materials Park, OH, ASM International.
   Google Scholar
• Patchett BM: ‘Some influences of slag composition on heat transfer and arc stability’, Weld. J., 1974, 53, (5), 203-s–210-s.
   Web of Science ®Google Scholar
• Pokhodnya I, Marchenko A, Gorpenyuk V, Makarenko V and Starodubtsev L: ‘Study of alternating current arc stability’, Arc Phys. Weld Pool Behav., 1980.
   Google Scholar
• Tressaud A: ‘Functionalized inorganic fluorides: synthesis, characterization and properties of nanostructured solids’, 2010, New York, John Wiley & Sons.
   Google Scholar
• Zhang N, Wosik J, Fragner W, Sonnleitner R and Nauer GE: ‘Three-dimensional analysis of the growth of intermetallics phases between solid steel and molten aluminium’, Intermetallics, 2010, 18, (2), 221–225.
   Web of Science ®Google Scholar
• Jácome LA, Weber S, Leitner A, Arenholz E, Bruckner J, Hackl H and Pyzalla AR: ‘Influence of filler composition on the microstructure and mechanical properties of steel-aluminum joints produced by metal arc joining’, Adv. Eng. Mater., 2009, 11, (5), 350–358.
   Web of Science ®Google Scholar
• Lee K.-J and Kumai S: ‘Characterization of intermetallic compound layer formed at the weld interface of the defocused laser welded low carbon steel/6111 aluminum alloy lap joint’, Mater. Trans., 2006, 47, (4), 1178–1185.
   Web of Science ®Google Scholar
• Torkamany M, Tahamtan S and Sabbaghzadeh J: ‘Dissimilar welding of carbon steel to 5754 aluminum alloy by Nd: YAG pulsed laser’, Mater. Des., 2010, 31, (1), 458–465.
   Web of Science ®Google Scholar
• Szczepaniak A, Fan J, Kostka A, and Raabe D: ‘On the correlation between thermal cycle and formation of intermetallic phases at the interface of laser–welded aluminum–steel overlap joints’, Adv. Eng. Mater., 2012, 14, (7), 464–472.
   Web of Science ®Google Scholar
• Dybkov VI: ‘Reaction diffusion and solid state chemical kinetics’; 2002, Kyiv, IPMS Publications.
   Google Scholar