References
- You DY, Gao XD and Katayama S: ‘Review of laser welding monitoring’, Sci. Technol. Weld. Join., 2014, 19, 181–201.
- Coniglio N and Patry M: ‘Measuring laser weldability of aluminium alloys using controlled restraint weldability test’, Sci. Technol. Weld. Join., 2013, 18, 573–580.
- Assuncao E, Ganguly S, Yapp D, Williams S and Paradowska A: ‘Characterisation of residual stress state in laser welded low carbon mild steel plates produced in keyhole and conduction mode’, Sci. Technol. Weld. Join., 2011, 16, 239–243.
- Blackburn JE, Allen CM, Hilton PA, Li L, Hoque MI and Khan AH: ‘Modulated Nd:YAG laser welding of Ti-6Al-4V’, Sci. Technol. Weld. Join., 2010, 15, 433–439.
- Kawahito Y, Mizutani M and Katayama S: ‘High quality welding of stainless steel with 10 kW high power fibre laser’, Sci. Technol. Weld. Join., 2010, 14, 288–294.
- Matsunawa A, Kim JD, Seto N, Mizutani M and Katayama S: ‘Dynamics of keyhole and molten pool in laser welding’, J. Laser Appl., 1998, 10, 247–254.
- Rai R, Roy GG and DebRoy T: ‘A computationally efficient model of convective heat transfer and solidification characteristics during keyhole mode laser welding’, J. Appl. Phys., 2007, 101, 054909.
- Rai R, Elmer JW, Palmer TA and DebRoy T: ‘Heat transfer and fluid flow during keyhole mode laser welding of tantalum, Ti-6Al-4V, 304L stainless steel and vanadium’, J. Phys. D: Appl. Phys., 2007, 40, 5753–5766.
- Ancona A, Spagnolo V, Lugara PM and Ferrara M: ‘Optical sensor for real-time monitoring of CO2 laser welding process’, Appl. Opt., 2001, 40, 6019–6025.
- You D., Gao X. and Katayama S., ‘Multiple-optics sensing of high-brightness disk laser welding process’, NDT&E Int., 2013, 60, 32–39.
- Huang W and Kovacevic R, ‘Feasibility study of using acoustic signals for online monitoring of the depth of weld in the laser welding of high-strength steels’, Proc. IMechE Part B: J. Eng. Manuf., 2009, 223, 343–361.
- Huang W and Kovacevic R: ‘A neural network and multiple regression method for the characterization of the depth of weld penetration in laser welding based on acoustic signatures’, J. Intell. Manuf., 2011, 22, 131–143.
- Farson DF and Kim KR: ‘Generation of optical and acoustic emissions in laser weld plumes’, J. Appl. Phys., 1999, 85, 1329–1336.
- Farson D, Ali A, and Sang Y: ‘Relationship of optical and acoustic emissions to laser weld penetration’, Weld. J., 1998, 77, 142s–148s.
- Li L., Brookfield D.J. and Steen W.M., ‘Plasma charge sensor for in-process, non-contact monitoring of the laser welding process’, Meas. Sci. Technol., 1996, 7, 615–626.
- Kim C.-H and Ahn D.-C, ‘Coaxial monitoring of keyhole during Yb:YAG laser welding’, Opt. Laser Technol., 2012, 44, 1874–1880.
- Kawahito Y, Ohnishi T and Katayama S: ‘In-process monitoring and feedback control for stable production of full-penetration weld in continuous wave fibre laser welding’, J. Phys. D: Appl. Phys., 2009, 42, 085501.
- Webster PJL, Leung BYC, Yu JXZ, Anderson MD, Hoult TP and Fraser JM: ‘Coaxial real-time metrology and gas assisted laser micromachining: process development, stochastic behavior and feedback control’, Proc. SPIE, 2010, 7590, 003.
- Webster PJL, Wright LG, Mortimer KD, Leung BY, Yu JXZ and Fraser JM: ‘Automatic real-time guidance of laser machining with inline coherent imaging’, J. Laser Appl., 2011, 23, 022001.
- Webster PJL, Wright LG, Ji Y, Galbraith CM, Kinross AW, Van Vlack C and Fraser JM: ‘Fully-automatic laser welding and micro-sculpting with universal in situ inline coherent imaging, arXiv:1404·4419, 2014.
- Fujinaga S, Takenaka H, Narikiyo T, Katayama S and Matsunawa A: ‘Direct observation of keyhole behaviour during pulse modulated high-power Nd:YAG laser irradiation’, J. Phys. D: Appl. Phys., 2000, 33, 492–497.
- Perret O, Bizouard M, Naudy Ph, Pascal G, Nore D, Horde Y and Delaisse Y: ‘Characterization of the keyhole formed during pulsed Nd-YAG laser interaction with a Ti-6Al-4V metallic target’, J. Appl. Phys., 2001, 90, 27–30.