Fuzzy assisted grey Taguchi approach for optimisation of multiple weld quality properties in friction stir welding process

References

• Thomas WM, Nicholas ED, Needham JC, Murch MG, Temple-Smith P and Dawes CJ: ‘Friction stir welding’, International patent application no. PCT/GB92/02203 and Great Britain patent application no. 9125978·8, 1991.
   Google Scholar
• Kamp N, Reynolds AP and Robson JD: ‘Modelling of 7050 aluminium alloy friction stir welding’, Sci. Technol. Weld. Join., 2009, 14, 589–596.
   Web of Science ®Google Scholar
• Hamilton C, Dymek S and Senkov O: ‘Characterisation of friction stir welded 7042-T6 extrusions through differential scanning calorimetry’, Sci. Technol. Weld. Join., 2012, 17, 42–48.
   Web of Science ®Google Scholar
• Hamilton C, Dymek S and Senkov O: ‘Monitoring torque and traverse force in friction stir welding from input electrical signatures of driving motors’, Sci. Technol. Weld. Join., 2013, 18, 191–197.
   Web of Science ®Google Scholar
• Fonda RW, Wert JA, Reynolds AP and Tang W: ‘Friction stir welding of single crystal aluminium’, Sci. Technol. Weld. Join., 2007, 12, 304–310.
   Web of Science ®Google Scholar
• Balasubramanian N, Gattu B and Mishra RS: ‘Process forces during friction stir welding of aluminium alloys’, Sci. Technol. Weld. Join., 2009, 14, 141–145.
   Web of Science ®Google Scholar
• McLean AA, Powell GLF, Brown IH and Linton VM: ‘Friction stir welding of magnesium alloy AZ31B to aluminium alloy 5083’, Sci. Technol. Weld. Join., 2003, 8, 462–464.
   Web of Science ®Google Scholar
• Shen J, Wang D and Liu K: ‘Effects of pin diameter on microstructures and mechanical properties of friction stir spot welded AZ31B magnesium alloy joints’, Sci. Technol. Weld. Join., 2012, 17, 357–363.
   Web of Science ®Google Scholar
• Thomas WM, Threadgill PL, and Nicholas ED: ‘Feasibility of friction stir welding steel’, Sci. Technol. Weld. Join., 1999, 4, 365–372.
   Web of Science ®Google Scholar
• Bhadeshia HKDH and DebRoy T: ‘Critical assessment: friction stir welding of steels’, Sci. Technol. Weld. Join., 2009, 14, 193–196.
   Web of Science ®Google Scholar
• Miyazawa T, Iwamoto Y, Maruko T and Fujii H: ‘Friction stir welding of 304 stainless steel using Ir based alloy tool’, Sci. Technol. Weld. Join., 2012, 17, 207–212.
   Web of Science ®Google Scholar
• Buffa G and Fratini L: ‘Friction stir welding of steels: process design through continuum based FEM model’, Sci. Technol. Weld. Join., 2012, 14, 239–246.
   Google Scholar
• Edwards P and Ramulu M: ‘Peak temperatures during friction stir welding of Ti–6Al–4V’, Sci. Technol. Weld. Join., 2010, 15, 468–472.
   Web of Science ®Google Scholar
• Liu H, Nakata K, Yamamoto N and Liao J: ‘Friction stir welding of pure titanium lap joint’, Sci. Technol. Weld. Join., 2010, 15, 428–432.
   Web of Science ®Google Scholar
• Pal S, Malviya S, Pal SK and Samantaray AK: ‘Optimization of quality characteristics parameters in a pulsed metal inert gas welding process using grey-based Taguchi method’, Int. J. Adv. Manuf. Technol., 2009, 44, 1250–1260.
   Web of Science ®Google Scholar
• Taguchi G: ‘Introduction to quality engineering: designing quality into products and processes’; 1986, New York, Kraus International Publications.
   Google Scholar
• Roy RK: ‘Design of experiments using the Taguchi approach’; 2001, New York, John Wiley & Sons Inc.
   Google Scholar
• Lakshminarayanan AK and Balasubramanian V: ‘Process parameters optimization for friction stir welding of RDE-40 aluminium alloy using Taguchi technique’, Trans. Nonferr. Met. Soc. China, 2008, 18, 548–554.
   Web of Science ®Google Scholar
• Koilraj M, Sundareswaran V, Vijayan S and Koteswara Rao SR: ‘Friction stir welding of dissimilar aluminum alloys AA2219 to AA5083 – optimization of process parameters using Taguchi technique’, Mater. Des., 2012, 42, 1–7.
   Web of Science ®Google Scholar
• Bozkurt Y: ‘The optimization of friction stir welding process parameters to achieve maximum tensile strength in polyethylene sheets’, Mater. Des., 2012, 35, 440–445.
   Web of Science ®Google Scholar
• Shojaeefard MH, Khalkhali A, Akbari M and Tahani M: ‘Application of Taguchi optimization technique in determining aluminum to brass friction stir welding parameters’, Mater. Des., 2013, 52, 587–592.
   Web of Science ®Google Scholar
• Karande P, Gauri SK and Chakraborty S: ‘Applications of utility concept and desirability function for materials selection’, Mater. Des., 2013, 45, 349–358.
   Web of Science ®Google Scholar
• Walia RS, Shan HS and Kumar P: ‘Multi-response optimization of CFAAFM process through taguchi method and utility concept’, Mater. Manuf. Processes, 2006, 21, 907–914.
   Web of Science ®Google Scholar
• Datta S, Bandyopadhyay A and Pal PK: ‘Desirability function approach for solving multi-objective optimization problem in submerged arc welding’, Int. J. Manuf. Sci. Prod., 2006, 7, 127–135.
   Google Scholar
• Prasanna P, Penchalayya Ch and Rao DA: ‘Optimization and validation of process parameters in friction stir welding on AA 6061 aluminum alloy using gray relational analysis’, Int. J. Eng. Res. Appl., 2013, 3, 1471–1481.
   Google Scholar
• Kumar R, Pragash MS and Varghese S: ‘Optimizing the process parameters of FSW on AZ31B Mg alloy by Taguchi–grey method’, Middle-East J. Sci. Res., 2013, 15, 161–167.
   Google Scholar
• Aydin H Bayram A, Esme U, Kazancoglu Y and Guven O: ‘Application of grey relation analysis (GRA) and Taguchi method for the parametric optimization of friction stir welding (FSW) process’, Mater. Technol., 2010, 44, 205–211.
   Google Scholar
• Deng J: ‘Control problems of grey systems’, Syst. Control Lett., 1982, 5, 288–294
   Google Scholar
• Deng J: ‘Introduction to grey theory’, J. Grey Syst., 1989, 1, 1–24.
   Google Scholar
• Zadeh LA: ‘Fuzzy sets’, Inf. Control, 1965, 8, 338–353.
   Web of Science ®Google Scholar
• Mamdani EH and Assilian S: ‘An experiment in linguistic synthesis with a fuzzy logic controller’, Int. J. Man-Mach. Stud., 1975, 7, 1–13.
   Google Scholar