References
- Liu L: ‘Welding and joining of magnesium alloys’, 1st edn; 2005, Cambridge, Woodhead Publishing Ltd.
- Liu L and Qi X: ‘Strengthening effect of nickel and copper interlayers on hybrid laser-TIG welded between magnesium alloy and mild steel’, Mater. Des., 2010, 31, (8), 3960–3963.
- Zhao X, Song G and Liu L: ‘Microstructure of dissimilar metal joint with magnesium alloy AZ31B and steel 304 for laser-tungsten inert gas lap welding’, Trans. Chin. Weld. Inst., 2006, 27, 56–62.
- Liu LM and Qi X: ‘Effects of copper addition on microstructure and strength of the hybrid laser-TIG welded joints between magnesium alloy and mild steel’, J. Mater. Sci., 2009, 44, 5725–5731.
- Liyange T, Kilbourne J and Gerlich AP: ‘Joint formation in dissimilar Al alloy/steel and Mg alloy/steel friction stir spot welds’, Sci. Technol. Weld. Joining, 2009, 14, (6), 500–508.
- Jana S, Hovanski Y and Grant GJ: ‘Friction stir lap welding of magnesium alloy to steel: a preliminary investigation’, Metall. Mater. Trans. A, 2010, 41A, (12), 3173–3182.
- Liu L, Xiao L, Feng JC, Tian YH, Zhou SQ and Zhou Y: ‘The mechanism of resistance spot welding of magnesium to steel’, Metall. Mater. Trans. A, 2010, 41A, (10), 2651–2661.
- Nasiri AM, Li L, Kim SH, Zhou Y, Weckman DC and Nguyen TC: ‘Microstructure and properties of laser brazed magnesium to coated steel’, Weld. J., 2011, 90, (11), 211s–219s.
- Nasiri AM, Weckman DC and Zhou Y: ‘Interfacial microstructure of diode laser brazed AZ31B magnesium to steel sheet using a nickel interlayer’, Weld. J., 2013, 92, (1), 1s–10s.
- Nasiri AM, Weckman DC and Zhou Y: ‘The effect of a Sn interlayer on brazebility of AZ31B magnesium to steel sheet’, 2014, to be published.
- Tan CW, Chen YB, Li LQ and Guo W: ‘Comparative study of microstructure and mechanical properties of laser welded-brazed Mg/steel joints with four different coating surfaces’, Sci. Technol. Weld. Joining, 2013, 18, (6), 466–472.
- Li L, Tan C, Chen Y, Guo W and Mei C: ‘CO2 laser welding-brazing characteristics of dissimilar metals AZ31B Mg alloy to Zn coated dual phase steel with Mg based filler’, J. Mater. Process. Technol., 2013, 213, 361–375.
- Li L, Tan C, Chen Y, Guo W and Song F: ‘Comparative study of microstructure and mechanical properties of laser welded-brazed Mg/mild steel and Mg/stainless steel joints’, Mater. Des., 2013, 43, 59–65.
- Material Safety Data Sheet, Flux No. 21, Superior Flux & Mfg. Co., Cleveland, OH, 2003, available at http://www.superiorflux.com/superior_flux_msds_spec_sheets.html.
- Vander Voort GF: ‘Metallography principles and practice’; 1999, Materials Park, OH, ASM International.
- Schwartz MM: ‘Brazing’; 1987, Materials Park, OH, ASM International.
- Li L, Tan CW, Chen Y, Guo W and Hu X: ‘Influence of Zn coating on interfacial reactions and mechanical properties during laser welding-brazing of Mg to steel’, Metall. Mater. Trans. A, 2012, 43A, (12), 4740–4754.
- Pearson WB: ‘Lattice spacings and structures of metals and alloys’; 1958, New York, Pergamon Press.
- Perrot P, Tissier JC and Dauphin JY: ‘Stable and metastable equilibria in the Fe-Zn-Al system at 450°C’, Z. Metallkd., 1992, 83, (11), 786–790.
- Niknejad ST, Liu L, Nguyen T, Lee MY, Esmaeili S and Zhou Y: ‘Effects of heat treatment on grain-boundary β-Mg17Al12 and fracture properties of resistance spot-welded AZ80 Mg alloy’, Metall. Mater. Trans. A, 2013, 44A, (8), 3747–3756.