References
- Cui CX, Hu BM, Zhao LC and Liu SJ: ‘Titanium alloy production technology, market prospects and industry development’, Mater. Des., 2011, 32, 1684–1691.
- Ren JW, Li YJ and Feng T: ‘Microstructure characteristics in the interface zone of Ti/Al diffusion bonding’, Mater. Lett., 2002, 56, 647–652.
- Yao W, Wu AP, Zou GS and Ren JL: ‘Formation process of the bonding joint in Ti/Al diffusion bonding’, Mater. Sci. Eng. A, 2008, A480, 456–463.
- Sohn WH, Bong HH and Hong SH: ‘Microstructure and bonding mechanism of Al/Ti bonded joint using Al/10Si/1Mg filler metal’, Mater. Sci. Eng. A, 2003, A355, 231–240.
- Kenevisi MS and Mousavi Khoie SM: ‘An investigation on microstructure and mechanical properties of Al7075 to Ti–6Al–4V Transient Liquid Phase (TLP) bonded joint’, Mater. Des., 2012, 38, 19–25.
- Kenevisi MS and Mousavi Khoie SM: ‘A study on the effect of bonding time on the properties of Al7075 to Ti–6Al–4V diffusion bonded joint’, Mater. Lett., 2012, 76, 144–146.
- Kahramana N, Gulencb B and Findik F: ‘Corrosion and mechanical-microstructural aspects of dissimilar joints of Ti–6Al–4V and Al plates’, Int. J. Impact Eng., 2007, 34, 1423–1432.
- Fuji A, Ameyama K and North TH: ‘Influence of silicon in aluminum on the mechanical properties of titanium/aluminum friction joints’, J. Mater. Sci., 1995, 30, 5185–5191.
- Chen SH, Li LQ, Chen YB and Huang JH: ‘Joining mechanism of Ti/Al dissimilar alloys during laser welding-brazing process’, J. Alloys Compd, 2011, 509, 891–898.
- Changa SY, Tsao LC, Lei YH, Mao SM and Huang CH: ‘Brazing of 6061 aluminum alloy/Ti–6Al–4V using Al–Si–Cu–Ge filler metals’, J. Mater. Process. Technol., 2012, 212, 8–14.
- Bang HS, Bang HS, Song HJ and Joo SM: ‘Joint properties of dissimilar Al6061-T6 aluminum alloy/Ti–6%Al–4%V titanium alloy by gas tungsten arc welding assisted hybrid friction stir welding’, Mater. Des., 2013, 51, 544–551.
- Chen YC and Nakata K: ‘Microstructural characterisation and mechanical properties in friction stir welding of aluminum and titanium dissimilar alloys’, Mater. Des., 2009, 30, 469–474.
- Chen XG, Yan JC, Ren SC, Wei JH and Wang Q: ‘Microstructure and mechanical properties of Ti–6Al–4V/Al1060 joints by ultrasonic-assisted brazing in air’, Mater. Lett., 2013, 95, 197–200.
- Zhu ZQ, Lee KY and Wang XL: ‘Ultrasonic welding of dissimilar metals, AA6061 and Ti6Al4V’, Int. J. Adv. Manuf. Technol., 2012, 59, 569–574.
- Cao R, Sun JH and Chen JH: ‘Mechanisms of joining aluminium A6061-T6 and titanium Ti–6Al–4V alloys by cold metal transfer technology’. Sci. Technol. Weld. Joining,2013, 18, 425–433.
- Song ZH, Nakata K, Wu AP and Liao JS: ‘Interfacial microstructure and mechanical property of Ti6Al4V/A6061 dissimilar joint by direct laser brazing without filler metal and groove’, Mater. Sci. Eng. A, 2013, A560, 111–120.
- Chen SH, Li LQ, Chen YB, Dai JM and Huang JH: ‘Improving interfacial reaction nonhomogeneity during laser welding–brazing aluminum to titanium’, Mater. Des., 2011, 32, 4408–4416.
- Borrisutthekul R, Yachi T, Miyashita Y and Mutoh Y: ‘Suppression of intermetallic reaction layer formation by controlling heat flow in dissimilar joining of steel and aluminum alloy’, Mater. Sci. Eng. A, 2007, A467, 108–113.
- Ma ZP, Wang CW, Yu HC, Yan JC and Shen HR: ‘The microstructure and mechanical properties of fluxless gas tungsten arc welding–brazing joints made between titanium and aluminum alloys’, Mater. Des., 2013, 45, 72–79.
- Lv SX, Jing XJ, Huang YX, Xu YQ, Zheng CQ and Yang SQ: ‘Investigation on TIG arc welding–brazing of Ti/Al dissimilar alloys with Al based fillers’, Sci. Technol. Weld. Joining, 2012, 17, 519–524.
- Wang DQ, Shi ZY and Teng YL: ‘Microstructure and oxidation of hot-dip aluminized titanium at high temperature’, Appl. Surf. Sci., 2005, 250, 238–246.
- Ma ZP, Zhao WW, Yan JC and Li DC. Interfacial reaction of intermetallic compounds of ultrasonic-assisted brazed joints between dissimilar alloys of Ti–6Al–4V and Al–4Cu–1Mg’, Ultrason. Sonochem., 2011, 18, 1062–1067.
- Xu L, Cui YY, Hao YL and Yang R: ‘Growth of intermetallic layer in multi-laminated Ti/Al diffusion couples’, Mater. Sci. Eng. A, 2006, A435–A436, 638–647.
- Gao M, Mei SW, Li XY and Zeng XY: ‘Characterization and formation mechanism of laser-welded Mg and Al alloys using Ti interlayer’, Scr. Mater., 2012, 67, 193–196.