In situ strain and temperature measurement and modelling during arc welding

Reference

• David SA and Debroy T: ‘Current issues and problems in welding science’, Science, 1992, 257, 497–502.
   PubMed Web of Science ®Google Scholar
• Feng Z: ‘A computational analysis of thermal and mechanical conditions for weld metal solidification cracking’, Weld. World, 1994, 33, (5), 340–347.
   Google Scholar
• Feng Z, Zacharia T and David SA: ‘On the thermomechanical conditions for weld metal solidification cracking’, in ‘Mathematical modeling of weld phenomena III’, (eds. Cerjak H and Bhadeshia H K D H), 114–148; 1997, London, The Institute of Materials.
   Google Scholar
• Goldak JA and Akhlaghi M: Computational welding mechanics’; 2005, New York, Springer.
   Google Scholar
• Feng Z: ‘Processes and mechanisms of welding residual stress and distortion’; 2005, Cambridge, Woodhead Publishing.
   Google Scholar
• Masubuchi K: ‘Analysis of welded structures’, 1st edn.; 1980, New York, Pergamon Press.
   Google Scholar
• De A and DebRoy T: ‘A perspective on residual stresses in welding’, Sci. Technol. Weld. Joining, 2011, 16, (3), 204–208.
   Web of Science ®Google Scholar
• Mochizuki M: ‘Evaluation of through thickness residual stress in multipass butt welded joint by using inherent strain’, Sci. Technol. Weld. Joining, 2006, 11, (5), 496–501.
   Google Scholar
• Zhang JX, Xue Y and Gong SL: ‘Residual welding stresses in laser beam and tungsten inert gas weldments of titanium alloy’, Sci. Technol. Weld. Joining, 2005, 10, (6), 643–646.
   Web of Science ®Google Scholar
• Hashimoto T, Osawa Y, Hirano S, Mochizuki M and Nishimoto K: ‘Accuracy improvement of X-ray residual stress measurement in welds of Ni based alloy by two-dimensional detector with multiaxial rocking’, Sci. Technol. Weld. Joining, 2011, 16, (3), 261–266.
   Google Scholar
• Woo W, Feng Z, Wang X.-L and David SA: ‘Neutron diffraction measurements of residual stresses in friction stir welding: a review’, Sci. Technol. Weld. Joining, 2011, 16, (1), 23–32.
   Google Scholar
• Smith DJ, Leggatt RH, Webster GA, Macgillivray HJ, Webster PJ and Mills G: ‘Neutron diffraction measurements of residual stress and plastic deformation in an aluminium alloy weld, J. Strain Anal. Eng. Des., 1988, 23, (4), 201–211.
   Google Scholar
• Zhang Z.-L, Silvanus J, Li H.-K and Shi Q.-Y: ‘Sensitivity analysis of history dependent material mechanical models for numerical simulation of welding process’, Sci. Technol. Weld. Joining, 2008, 13, (5), 422–429.
   Google Scholar
• Gao H, Hermans MJM and Richardson IM: ‘Simulation of transient force and strain during thermal mechanical testing relevant to the HAZ in multi-pass welds’, Sci. Technol. Weld. Joining, 2013, 18, (6), 525–531.
   Google Scholar
• Chen XZ, Huang YM, Shen Z, Chen J, Lei YC and Zhou JZ: ‘Effect of thermal cycle on microstructure and mechanical properties of CLAM steel weld CGHAZ’, Sci. Technol. Weld. Joining, 2013, 18, (4), 272–278.
   Google Scholar
• Kayser P, Godefroy JC and Leca L: ‘High-temperature thin-film strain-gauges’, Sens. Actuators A, 1993, 37A, (8), 328–332.
   Google Scholar
• Woo W, Feng Z, Wang X.-L, Brown DW, Clausen B, An K, Choo H, Hubbard CR and David SA: ‘In situ neutron diffraction measurements of temperature and stresses during friction stir welding of 6061-T6 aluminum alloy’, Sci. Technol. Weld. Joining, 2007, 12, (4), 298–303.
   Web of Science ®Google Scholar
• Kromm A, Kannengiesser T and Gibmeier J: ‘In situ studies of phase transformation and residual stresses in LTT alloys during welding using synchrotron radiation’, 13–26; 2010, Berlin, Springer.
   Google Scholar
• Johnson L: ‘Moiré techniques for measuring strains during welding’, Exp. Mech., 1974, 14, (4), 145–151.
   Google Scholar
• Kowalski VT and Voloshin AS: ‘Moiré interferometry analysis of laser weld induced thermal strain’, J. Electron. Packag., 1994, 116, (3), 177–183.
   Google Scholar
• Eriksson I, Haglund P, Powell J, Sjödahl M and Hermann Kaplan AF: ‘Holographic measurement of thermal distortion during laser spot welding’, Opt. Eng., 2012, 51, (3), 030501.
   Google Scholar
• Meguro S and Muramatsu Y: ‘Application of ESPI system to welding’, Q. J. Jpn. Weld. Soc., 2006, 24, (3), 247–252.
   Google Scholar
• Sutton MA, Orteum J.-J and Schreier HW: ‘Image correlation for shape, motion and deformation measurement’, ISBN 978-0-387-78746-6; 2009, New York, Springer.
   Google Scholar
• Nelson DV, Makino A and Schmidt T: ‘Residual stress determination using hole drilling and 3D image correlation’, Exp. Mech., 2006, 46, (1), 31–38.
   Google Scholar
• Niendorf T, Dadda J, Canadinc D, Maier HJ and Karaman I: ‘Monitoring the fatigue-induced damage evolution in ultrafine-grained interstitial-free steel utilizing digital image correlation’, Mater. Sci. Eng. A, 2009, A517, (1–2), 225–234.
   Google Scholar
• Pan B, Wu D, Wang Z and Xia Y: ‘High-temperature digital image correlation method for full-field deformation measurement at 1200 degrees C’, Meas. Sci. Technol., 2011, 22, (1), 015701.
   Google Scholar
• De Strycker M, Lava P, Van Paepegem W, Schueremans L and Debruyne D: ‘Measuring welding deformations with the digital image correlation technique’, Weld. J., 2011, 90, 107–112.
   Web of Science ®Google Scholar
• De Strycker M, Van Paepegem W, Schueremans L and Debruyne D: ‘The effect of residual stresses on the strain evolution during welding of thin-walled tubes’, Key Eng. Mater., 2011, 473, 298–303.
   Google Scholar
• Shibahara M, Yamaguchi K, Onda T, Itoh S and Masaoka K: ‘Studies on in-situ full-field measurement for in-plane welding deformation using digital camera’, Weld. Int., 2012, 26, (8), 612–620.
   Google Scholar
• Feng Z, Wang X.-L, Spooner S, Goodwin GM, Maziasz PJ, Hubbard CR and Zacharia T: ‘A finite element model for residual stress in repair welds’, ASME PVP, 1996, 327, 119–125.
   Google Scholar
• Hibbitt HD and Marcal PV: ‘A numerical, thermo-mechanical model for the welding and subsequent loading of a fabricated structure’, Comput. Struct., 1973, 3, 1145–1174.
   Google Scholar
• Friedman EJ: ‘Thermo-mechanical analysis of the welding process using the finite element method’, Trans. ASME J. Pres. Ves. Technol. J, 1975, 97J, (3), 206–213.
   Google Scholar
• Shim Y, Feng Z, Lee S, Kim DS, Jaeger J, Paparitan JC and Tsai CL: ‘Determination of residual-stresses in thick-section weldments’, Weld. J., 1992, 71, (9), 305s–312s.
   Google Scholar
• Karlsson RI and Josefson BL: ‘Three-dimensional finite element analysis of temperatures and stresses in a single-pass butt-welded pipe’, J. Pressure Vessel Technol., 1990, 112, (3), 76–84.
   Google Scholar
• Bate SK, Charles R and Warren A: ‘Finite element analysis of a single bead-on-plate specimen using SYSWELD’, Int. J. Press. Vessels Pip., 2009, 86, (1), 73–78.
   Google Scholar
• Anca A, Cardona A, Risso J and Fachinotti VD: ‘Finite element modeling of welding processes’, Appl. Math. Modell., 2011, 35, (2), 688–707.
   Google Scholar
• Feng Z, Zhu YY, Zacharia T, Fields RJ, Brand PC, Prask HJ and Blackburn J: ‘Modeling and validation of residual stress distribution in a HSLA-100 disk’, Gatlinburg, TN, USA, 1995, Proc. 4th Int. Conf. on ‘Trends in welding research’, ASM International, 105–110.
   Google Scholar
• Jiang W, Yahiaoui K, Hall FR and Laoui T: ‘Comparison of sequentially and fully coupled generalized plane strain FE modeling of multi-pass welding’, Proc. NAFEMS World Congress, Malta, 2005, 17–29.
   Google Scholar
• Holt JM, Mindlin H and Ho CY: ‘Structural alloy handbook’; 1996, Lafayette, IN, CINDAS/Purdue University.
   Google Scholar
• Washko SD and Aggen G: ‘Wrought stainless steels, properties and selection: irons, steels, and high-performance alloys’, in ‘ASM handbook’, Vol. 1, ‘Metals handbook’, 841–907; 1990, Materials Park, OH, ASM International.
   Google Scholar
• Brown WF, Mindlin H and Ho CY: ‘Aerospace structural metals handbook’; 1993, West Lafayette, IN, CINDAS/USAF CRDA Handbooks Operation and Purdue University3.
   Google Scholar
• Goldak J, Chakravarti A and Bibby M: ‘A new finite element model for welding heat sources’, Metall. Trans. B, 1984, 15B, (2), 299–305.
   Web of Science ®Google Scholar