References
- Han JH, Ahn JP and Shin MC: ‘Effect of interlayer thickness on shear deformation behaviour of AA5083 aluminium alloy/SS41 steel plates manufactured by explosive welding', J. Mater. Sci., 2003, 38, 13–18.
- Fukumoto S, Tsubakino H, Okita K, Aritoshi M and Tomita T: ‘Friction welding process of 5052 aluminium alloy to 304 stainless steel', Mater. Sci. Technol., 1999, 15, 1080–1086.
- Kimapong K and Watanabe T: ‘Friction stir welding of aluminium alloy to steel', Weld. J., 2004, 83, 277–282.
- Andrews DR: ‘Joining aluminium to mild steel by argon arc welding', Brit. Weld. J., 1962, 9, 650–658.
- Bel’chuk GA: ‘Investigation of certain features of the argon-arc welding of aluminium and its alloys to steel', Weld. Prod., 1961, 5, 14–20.
- Yasuyama M, Ogawa K and Taka T: ‘Spot welding of aluminium and steel sheet with an insert of aluminium clad steel sheet: dissimilar metal joining of aluminium and steel sheet (1st Report)', Weld. Int., 1996, 10, 965–970.
- Sun X, Stephens EV, Khaleel MA, Shao H and Kimchi M, ‘Resistance spot-welding of aluminium alloy to steel with transition material - from process to performance - part I: experimental study' Weld. J., 2004, 83, 188s–195s.
- Roulin M, Luster JW, Karadeniz G and Mortensen A: ‘Strength and structure of furnace-brazed joints between aluminium and stainless steel', Weld. J., 1999, 78, 151–155.
- Lin SB, Song JL, Yang CL, Fan CL and Zhang DW: ‘Brazability of dissimilar metals tungsten inert gas butt welding–brazing between aluminum alloy and stainless steel with Al-Cu filler metal', Mater. Des., 2010, 31, 2637–2642.
- Mathieu A, Pontevicci S, Viala J.-C, Cicala E, Mattei S and Grevey D: ‘Laser brazing of a steel/aluminium assembly with hot filler wire (88% Al, 12% Si)', Mater. Sci. Eng. A, 2006, 435–436, 19–28.
- Sierra G, Peyre P, Deschaux-Beaume F, Stuart D and Fras G: ‘Steel to aluminium key-hole laser welding', Mater. Sci. Eng. A, 2007, 447, 197–208.
- Sierra G, Peyre P, Deschaux Beaume F, Stuart D and Fras G: ‘Galvanised steel to aluminium joining by laser and GTAW processes', Mater. Charact., 2008, 59, 1705–1715.
- Peyre P, Sierra G, Deschaux-Beaume F, Stuart D and Fras G: ‘Generation of aluminium-steel joints with laser-induced reactive wetting', Mater. Sci. Eng. A, 2007, 444, 327–338.
- Sierra G, Peyre P, Deschaux Beaume F, Stuart D and Fras G: ‘Steel to aluminium braze-welding by laser process with an Al-12Si filler wire', Sci. Technol. Weld. Join., 2008, 13, 430–437.
- Dong Honggang, Hu Wenjin, Duan Yuping, Wang Xudong and Dong Chuang: ‘Dissimilar metal joining of aluminum alloy to galvanized steel with Al-Si, Al-Cu, Al-Si-Cu and Zn-Al filler wires', J. Mater. Process. Technol., 2012, 212, 458–464.
- Feng JC, Zhang HT and He P: ‘The CMT short-circuiting metal transfer process and its use in thin aluminium sheets welding', Mater. Des., 2009, 30, 1850–1852.
- Zhang HT, Feng JC, He P and Hackl H: ‘Interfacial microstructure and mechanical properties of aluminium-zinc-coated steel joints made by a modified metal inert gas welding-brazing process', Mater. Charact., 2007, 58, 588–592.
- Zhang HT, Feng JC, He P, Zhang BB, Chen JM and Wang L: ‘The arc characteristics and metal transfer behaviour of cold metal transfer and its use in joining aluminium to zinc-coated steel', Mater. Sci. Eng. A, 2009, 499, 111–113.
- Cao R, Yu G, Chen JH and Wang PC: ‘Cold metal transfer joining aluminum alloys to galvanized mild steel', J. Mater. Process. Technol., 2013, 213, 1753– 1763.
- Cao R, Huang Q, Chen JH and Wang PC: ‘Cold metal transfer spot plug welding of AA6061-T6 to galvanized steel for automotive applications', J. Alloys Comp., 2014, 585, 622–632.
- Yang S, Zhang J, Lian J and Lei Y: ‘Welding of aluminum alloy to zinc coated steel by cold metal transfer', Mater. Des., 2013, 49, 602–612.
- Pickin CG, Williams SW and Lunt M: ‘Characterisation of the cold metal transfer (CMT) process and its application for low dilution cladding', J. Mater. Process. Technol., 2011, 211, 496–502.
- Massalski TB, Murray JL, Bennett LH and Baker H: ‘Binary Alloy Phase Diagrams' Vol. 1, 148; 1986, Metals Park, Ohio, American Society for Metals.
- Lesnewich A: ‘Control of melting rate and metal transfer in gas shielded metal arc welding. Part I - Control of electrode melting rate', Weld. J., 1958, 37, 343s.
- Waszink H and Van Den Heuvel JPM: ‘Heat Generation and Heat Flow in the Filler Metal in GMA Welding', Weld. J., 1982, 61, 269–280.