Investigation of non-equilibrium grain boundary segregation on CGHAZ in reactor pressure vessel steel

References

• Liao J., Ikeuchi K. and Matsuda F.: ‘Toughness investigation on simulated weld HAZs of SQV-2A pressure vessel steel’, Nucl. Eng. Des., 1998, 183, 9–20.
   Web of Science ®Google Scholar
• Moon J., Kim S. J. and Lee C.: ‘Effect of thermo-mechanical cycling on the microstructure and strength of lath martensite on the weld CGHAZ Of HSLA steel’, Mater. Sci. Eng. A, 2011, A528, 7658–7662.
   Google Scholar
• Kim S., Kang S. Y., Lee S., Oh S. J., Kwon S. J., Kim O. H. and Hong J. H.: ‘Correlation of the microstructure and fracture toughness of the heat-affected zones of an SA 508 steel’, Metall. Mater. Trans. A, 31A, 2000, 1107–1119.
   Google Scholar
• Kuo H. T., Wei R. C., Wu W. F. and Yang J. R.: ‘Simulated heat affected zone in ASTM A533-B steel plates under low heat inputs’, Mater. Chem. Phys., 2009, 117, 471–477.
   Web of Science ®Google Scholar
• Million K., Datta R. and Zimmermann H.: ‘Effects of heat input on the microstructure and toughness of the 8 Mnmoni 55 shape-welded nuclear steel’, J. Nucl. Mater., 2005, 340, 25–32.
   Web of Science ®Google Scholar
• Chen X. Z., Huang Y. M., Shen Z., Chen J., Lei Y. C. and Zhou J. Z.: ‘Influence of Ti/N ratio on simulated CGHAZ microstructure and toughness in X70 steels’, Sci. Technol. Weld. Join., 2013, 18, 45–51.
   Web of Science ®Google Scholar
• Druce S. G., Gage G. and Jordan G.: ‘Effect of aging on properties of pressure vessel steels’, Acta Metall., 1986, 34, 641–652.
   Google Scholar
• Smith C., Pistorius P. G. H. and Wannenburg J.: ‘The effect of a long post weld heat treatment on the integrity of a welded joint in a pressure vessel steel’, Int. J. Pres. Ves. Pip., 1997, 70, 183–195.
   Web of Science ®Google Scholar
• IAEA: ‘Reference manual on the IAEA JRQ correlation monitor steel for irradiation damage studies’, IAEA-TECDOC-1230, Vienna, Austria, July, International Atomic Energy Agency, Paper 29; 2001.
   Google Scholar
• Li Y. L., Zhang H. Q., Fu L. M., Chen J. B. and Li J. F.: ‘Effect of post weld heat treatment on toughness of base metal of nuclear reactor pressure vessel steel A533B’, J. Iron Steel Res. Int., 2011, 18, 412–416.
   Web of Science ®Google Scholar
• Wang S. T., Yang K., Shan Y. Y. and Li L. F.: ‘Plastic deformation and fracture behaviors of nitrogen-alloyed austenitic stainless steels’, Mater. Sci. Eng. A, 2008, A490, 95–104.
   Web of Science ®Google Scholar
• McMahon C. J.: ‘Temper brittleness—an interpretive review’, in ‘Temper embrittlement in steel’, ASTM-STP 407, 127–167; 1968, Philadelphia, American Society for Testing and Materials.
   Google Scholar
• C. J. McMahon Jr: ‘Temper embrittlement of steel’, in ‘Encyclopedia of materials science and engineering’ 5, 25–56; 1986, Oxford, Pergamon.
   Google Scholar
• Naylor J. P. and Guttmann M.: ‘Mechanism of upper-nose temper embrittlement in Mn-Ni-Mo A533 Gr. B steel’, Metal Sci., 1981, 15, 433–441.
   Web of Science ®Google Scholar
• Aust K. T., Hanneman R. E., Niessen P. and Westbrook J. H.: ‘Solute induced hardening near grain boundaries in zone refined metals’, Acta Metall., 1968, 16, 291–302.
   Google Scholar
• Xu T. D. and Cheng B. Y.: ‘Kinetics of non-equilibrium grain-boundary segregation’, Prog. Mater. Sci., 2004, 49, 109–208.
   Web of Science ®Google Scholar
• McLean D.: ‘Grain boundaries in metals’, 33–78; 1957, Oxford, Oxford University.
   Google Scholar
• Anthony T. R.: ‘Solute segregation in vacancy gradients generated by sintering and temperature changes’, Acta Metall., 1969, 17, 603–607.
   Google Scholar
• Faulkner R. G.: ‘Non-equilibrium grain-boundary segregation in austenitic alloys’, J. Mater. Sci., 1981, 16, 373–383.
   Web of Science ®Google Scholar
• Xu T. D.: ‘Non-equilibrium grain-boundary segregation kinetics’, J. Mater. Sci., 1987, 22, 337–345.
   Web of Science ®Google Scholar
• Li Q. F., Li L., Liu E. B. and Cui X. F.: ‘Temper embrittlement dynamics induced by non-equilibrium segregation of phosphorus in steel 12Cr1MoV’, Scr. Mater., 2005, 53, 309–313.
   Web of Science ®Google Scholar
• Li L., Li Q. F., Guo E. J., Liu E. B., Cui X. F. and Xu X. X: ‘Study on temper embrittlement of phosphorus in steel 12Cr1MoV’, Key Eng. Mater., 2005, 297-300, 1183–1188.
   Google Scholar
• Aust K. T., Armijo S. J., Koch E. F. and Westbrook J. H.: ‘Intergranular corrosion and electron microscopic studies of austenitic stainless steels’, Trans. Am. Soc. Met., 1967, 60, 360–372.
   Google Scholar
• Xu T. -D.: ‘The critical time and critical cooling rate of non-equilibrium grain-boundary segregations’, J. Mater. Sci. Lett., 1988, 7, 241–242.
   Google Scholar
• Seibel G.: ‘Diffusion of S and P in solid Fe’, Mem. Sci. Rev. Met., 1964, 61, 413–436.
   Google Scholar
• Seve P., Janvec J. and Katana V.: ‘On kinetics of phosphorus segregation in Cr-Mo-V low alloy steel’, Scr. Metall. Mater., 1994, 31, 1673–1678.
   Google Scholar
• Song S. H., Xu T. D. and Yuan Z. X.: ‘Determination of critical time and critical cooling rate of non-equilibrium grain-boundary segregation’, Acta Metall., 1989, 37, 19–323.
   Google Scholar
• Vorlicek V. and Flewitt P. E. J.: ‘Cooling induced segregation of impurity elements to grain boundaries in Fe-3 wt%Ni alloys, 2.25wt% Cr-1wt% Mo steel and submerged arc weld metal’, Acta Metall. Mater., 1994, 42, 3309–3320.
   Google Scholar
• Peng B. C., Zhang H. X., Hong J., Gao J. Q., Wang Q. J. and Zhang H. Q.: ‘Effect of aging on the impact toughness of 25Cr-20Ni-Nb-N steel’, Mater. Sci. Eng. A, 2010, A527, 1957–1961.
   Web of Science ®Google Scholar
• Zhang X. Z. and Knott J. F.: ‘Cleavage fracture in bainitic and martensitic microstructures’, Acta Mater., 1999, 47, 3483–3495.
   Web of Science ®Google Scholar
• Zhang X. Z. and Knott J. F.: ‘The statistical modelling of brittle fracture in homogeneous and heterogeneous steel microstructures’, Acta Mater., 2000, 48, 2135–2146.
   Web of Science ®Google Scholar