References
- Thomas W. M., Johnson K. I. and Wiesner C. S.: ‘Friction stir welding – recent developments in tool and process technologies’, Adv. Eng. Mater., 2003, 5, (7), 485–490.
- Thomas W. M., Nicholas E. D., Needham J. C., Murch M. G., Templesmith P. and Dawes C. J.: ‘Friction stir welding’, International patent application no. PCT/GB92102203 and Great Britain patent application no. 9125978; 1991.
- Posada M. and Roush S.: ‘Friction stir welding – a promising new technique for joining metals’, Seaframe, 2005, 1, (2), 17–18.
- Nandan R., Debroy T. and Bhadeshia H. K. D. H.: ‘Recent advances in friction stir welding – process, weldment structure and properties’, Prog. Mater. Sci., 2008, 53, 980–1023.
- Simar A., Bréchet Y., De Meester B., Denquin A. and Pardoen T.: ‘Microstructure, local and global mechanical properties of friction stir welds in aluminium alloy 6005A-T6’, Mater. Sci. Eng. A, 2008, A486, 85–95.
- Balasubramanian V.: ‘Relationship between base metal properties and friction stir welding process parameters’, Mater. Sci. Eng. A, 2008, A480, 397–403.
- Bhadeshia H. K. D. H. and DebRoy T.: ‘Critical assessment: friction stir welding of steels’, Sci. Technol. Weld. Join., 2009, 14, (3), 193–196.
- Gan W., Li Z. T. and Khurana S.: ‘Tool materials selection for friction stir welding of L80 steel’, Sci. Technol. Weld. Join., 2007, 12, 610–613.
- Rai R., De A., Bhadeshia H. K. D. H. and Debroy T.: ‘Review: friction stir welding tools’, Sci. Technol. Weld. Join., 2011, 16, (4), 325–342.
- Perrett J., Martin J., Peterson J., Steel R. and Packer S.: ‘Friction stir welding of industrial steels’. Proc. TMS Annual Meet., February–March 2011, San Diego, CA, USA, TMS.
- Sorensen C. D.: ‘Evaluation of PCBN pin tool wear during FSW of Structural steel’. Friction Stir Science and Technology (ONR), Book of Abstracts, PI Review Meeting, York, PA, USA, October 2009, 30.
- Song K. H., Fujii H. and Kakata K.: ‘Effect of welding speed on microstructural and mechanical properties of friction stir welded Inconel 600’, Mater. Des., 2009, 30, 3972–3978.
- Fujii H., Cui L., Tsuji N., Maeda M., Nakata K. and Nogi K.: ‘Friction stir welding of carbon steels’, Mater. Sci. Eng. A, 2006, A429, 50–57.
- Lakshminarayanan A. K. and Balasubramanian V.: ‘An assessment of microstructure, hardness, tensile and impact strength of friction stir welded ferritic stainless steel joints’, Mater. Des., 2010, 31, (10), 4592–4600.
- Liu H. J., Zhang H. J. and Yu L.: ‘Effect of welding speed on microstructures and mechanical properties of underwater friction stir welded 2219 aluminium alloy’, Mater. Des., 2011, 32, 1548–1553.
- Stewart W. C.: ‘Feasibility of underwater friction sir welding of HY-80 steel’; MSc thesis, Naval Postgraduate School, Monterey, CA, USA 2011.
- Gar T., Mathur P., Singhal V., Jain C. and Gupta P.: ‘Underwater friction stir welding: an overview’, Int. Rev. Appl. Eng. Res., 2014, 4, (2), 165–170.
- Toumpis A., Galloway A. M., Cater S. R. and McPherson N. A.: ‘Development of a process envelope for friction stir welding of DH36 steel – a step change’, Mater. Des., 2014, 62, 64–75.
- McPherson N. A., Galloway A. M., Wood J. and Cater S. R.: ‘A comparison between friction stir welded and submerged arc welded DH36 steel thin plate’. Proc. 9th Int. Conf. on ‘Trends in welding research, Chicago, IL, USA, June 2012.
- Lienert T. J., W. L. Stellwag Jr. and Lehman L. R.: ‘Comparison of heat inputs: friction stir welding vs. arc welding’, Columbus, OH, Edison Welding Institute.
- Baker T. N., McPherson N. A.. Unpublished work, University of Strathclyde, Glasgow, UK, 2014.
- Rückert G., Chargy M., Cortial F. and Jorez F.: ‘Evaluation of FSW on high yield strength steels for shipbuilding’, Mater. Sci. Forum, 2014, 783–786, 1776–1781.
- ‘NIST/SEMATECH e-handbook of statistical methods’. http://www.itl.nist.gov/div898/handbook/.