High strength steel (600–900 MPa) deposited metals: microstructure and mechanical properties

References

• J. R. Yang, C. Y. Huang and S. C. Wang: ‘The development of ultra-low-carbon bainitic steels’, Mater. Des., 1992, 13, 335–338. doi: 10.1016/0261-3069(92)90003-Z
   Google Scholar
• J. W. Li and Q. S. Liu: ‘The research status on ULCB steel’, J. Tianjin Univ. Technol., 2008, 24, (1), 56–59.
   Google Scholar
• H. Mohrbacher: ‘Combined effects of Nb and B micro alloying in molybdenum based ultra low carbon bainitic (ULCB) steels’, J. Iron Steel Res. Int., 2011, 18, 785–791.
   Web of Science ®Google Scholar
• H. K. D. H. Bhadeshia: ‘Bainite in steels: transformations, microstructure and properties’, 2nd edn; 2001, London, IOM Communications.
   Google Scholar
• J. S. Kang, J. B. Seol and C. G. Park: ‘Three-dimensional characterization of bainitic microstructures in low-carbon high-strength low-alloy steel studied by electron backscatter diffraction’, Mater. Charact., 2013, 79, 110–121. doi: 10.1016/j.matchar.2013.02.009
   Web of Science ®Google Scholar
• Z. M. Zhang, Q. W. Cai, W. Yu, X. L. Li and L. D. Wang: ‘Continuous cooling transformation behavior and kinetic models of transformations for an ultra-low carbon bainitic steel’, J. Iron Steel Res. Int., 2012, 19, 73–78.
   Web of Science ®Google Scholar
• A. Lambert-Perlade, A. F. Gourgues and A. Pineau: ‘Austenite to bainite phase transformation in the heat-affected zone of a high strength low alloy steel’, Acta Mater., 2004, 52, 2337–2348. doi: 10.1016/j.actamat.2004.01.025
   Web of Science ®Google Scholar
• W. G. Zhao, W. Wang, S. H. Chen and J. B. Qu: ‘Effect of simulated welding thermal cycle on microstructure and mechanical properties of X90 pipeline steel’, Mater. Sci. Eng. A, 2011, A528, 7417–7422. doi: 10.1016/j.msea.2011.06.046
   Web of Science ®Google Scholar
• H. H. Wang, K. M. Wu, X. W. Lei and Y. Qian: ‘Effect of fast cooling process on the microstructure and toughness of heat-affected zone in a high strength pipeline steel X120’, Sci. Technol. Weld. Join., 2012, 17, 309–313. doi: 10.1179/1362171812Y.0000000009
   Web of Science ®Google Scholar
• H. Liu, X. H. Xue and J. H. Li: ‘Research progress on microstructure and properties of ULCB weld metal’, Hot. Work. Technol., 2012, 41, 138–140.
   Google Scholar
• ‘Specification for low-alloy steel electrodes and rods for gas shielded arc welding’, A5.28/A5.28M 2005, Miami, FL, AWS.
   Google Scholar
• ‘Standard methods for mechanical testing of welds’, B4.0 2007, Miami, FL, AWS.
   Google Scholar
• ‘Metal-inspection method of microstructure’, 13298 1991, Beijing, GB/T.
   Google Scholar
• Y. Ito and K. Bessyo: ‘Cracking parameter of high strength steels related to HAZ cracking’, J. Jpn Weld. Soc., 1968, 37, 983–991. doi: 10.2207/qjjws1943.37.983
   Google Scholar
• H. Ozaki, J. Naiman and K. Masubuchi: ‘A study of hydrogen cracking in underwater steel welds’, Weld. J., 1977, 56, 231s–237s.
   Web of Science ®Google Scholar
• R. A. Ricks, P. R. Howell and G. S. Barritte: ‘The nature of acicular ferrite in HSLA steel weld metals’, J. Mater. Sci., 1982, 17, 732–740. doi: 10.1007/BF00540369
   Web of Science ®Google Scholar
• K. Easterling: ‘Introduction to the physical metallurgy of welding’, 2nd edn; 1992, Oxford, Butterworth-Heinemann.
   Google Scholar
• S. Kou: ‘Welding metallurgy’, 2nd edn; 2003, Hoboken, NJ, John Wiley and Sons.
   Google Scholar
• D. A. Porter, K. E. Easterling and M. Y. Sherif: ‘Phase transformations in metals and alloys’, 3rd edn; 2009, Boca Raton, FL, Taylor and Francis.
   Google Scholar
• D. Fairchild, M. Macia, N. Bangaru, J. Koo, A. Ozekcin and H. Jin: ‘Welding development for the world's strongest pipeline: X120’. Proc. 7th Int. Conf. on ‘Trends in welding research’, Georgia, USA, May 2005, Callaway Gardens Resort, Pine Mountain, 749–754.
   Google Scholar
• S. Zajac, V. Schwinn and K. H. Tacke: ‘Characterisation and quantification of complex bainitic microstructures in high and ultra-high strength linepipe steels’, Mater. Sci. Forum, 2005, 500-501, 387–394. doi: 10.4028/www.scientific.net/MSF.500-501.387
   Google Scholar
• T. Yamada, H. Terasaki and Y. Komizo: ‘Microscopic observation of inclusions contributing to formation of acicular ferrite in steel weld metal’, Sci. Technol. Weld. Join., 2008, 13, 118–125. doi: 10.1179/174329308X271797
   Web of Science ®Google Scholar
• A. Takada, H. Terasaki and Y. Komizo: ‘Effect of aluminium content on acicular ferrite formation in low carbon steel weld metals’, Sci. Technol. Weld. Join., 2013, 18, 91–97. doi: 10.1179/1362171812Y.0000000086
   Web of Science ®Google Scholar
• T. L. Zhang, Z. X. Li, F. Young, H. J. Kim, H. Li, H. Y. Jing and W. Tillmann: ‘Global progress on welding consumables for HSLA steel’, ISIJ Int., 2014, 54, 1472–1484. doi: 10.2355/isijinternational.54.1472
   Web of Science ®Google Scholar
• T. L. Zhang, Z. X. Li, S. Kou, H. Y. Jing, G. D. Li, H. Li and H. J. Kim: ‘Effect of inclusions on microstructure and toughness of deposited metals of self-shielded flux cored wires’. Mater. Sci. Eng. A, 2015, A628, 332–339.
   Google Scholar