Vibration assisted welding processes and their influence on quality of welds

References

• G. S. Prihandana, M. Mahardika, M. Hamdi, Y. S. Wong and K. Mitsui: ‘Effect of micro-powder suspension and ultrasonic vibration of dielectric fluid in micro-EDM processes – Taguchi approach’, Int. J. Mach. Tools Manuf., 2009, 49, (12–13), 1035–1041. doi: 10.1016/j.ijmachtools.2009.06.014
   Web of Science ®Google Scholar
• M. G. Xu, J. H. Zhang, Y. Li, Q. H. Zhang and S. F. Ren: ‘Material removal mechanisms of cemented carbides machined by ultrasonic vibration assisted EDM in gas medium’, J. Mater. Process. Technol., 2009, 209, (4), 1742–1746. doi: 10.1016/j.jmatprotec.2008.04.031
   Web of Science ®Google Scholar
• T. Jimma, Y. Kasuga, N. Iwaki, O. Miyazawa, E. Mori, K. Ito and H. Hatano: ‘An application of ultrasonic vibration to the deep drawing process’, J. Mater. Process. Technol., 1998, 80-81, 406–412. doi: 10.1016/S0924-0136(98)00195-2
   Web of Science ®Google Scholar
• H. Qi, J. Yuan and T. Xie: ‘Investigations on the effects of ultrasonic vibrations in the wire drawing’, Proc. IEEE Ultrasonics Symp., Beijing, China, November, IEEE, 2008, 2134–2137.
   Google Scholar
• S. A. A. A. Mousavi, H. Feizi and R. Madoliat: ‘Investigations on the effects of ultrasonic vibrations in the extrusion process’, J. Mater. Process. Technol., 2007, 187-188, 657–661. doi: 10.1016/j.jmatprotec.2006.11.168
   Web of Science ®Google Scholar
• Z. Huang, M. Lucas and M. J. Adams: ‘Influence of ultrasonics on upsetting of a model paste’, Ultrasonics, 2002, 40, (1–8), 43–48. doi: 10.1016/S0041-624X(02)00245-7
   PubMed Web of Science ®Google Scholar
• H. Weber, J. Herberger and R. Pilz: ‘Turning of machinable glass ceramics with an ultrasonically vibrated tool’, CIRP Ann., 1984, 33, (1), 85–87. doi: 10.1016/S0007-8506(07)61385-7
   Google Scholar
• V. I. Babitsky, A. Kalashnikov, A. Meadows and A. Wijesundara: ‘Ultrasonically assisted turning of aviation materials’, J. Mater. Process. Technol., 132, 157–167. doi: 10.1016/S0924-0136(02)00844-0
   Web of Science ®Google Scholar
• R. C. Skelton: ‘Turning with an oscillating tool’, Int. J. Mach. Tool Des. Res., 1968, 8, (4), 239–259. doi: 10.1016/0020-7357(68)90014-0
   Web of Science ®Google Scholar
• Y. Li and K. Shen: ‘The effect of melt vibration on polystyrene melt flowing behavior during extrusion’, J. Macromol. Sci. B, 2008, 47, (6), 1228–1235. doi: 10.1080/00222340802403453
   Web of Science ®Google Scholar
• V. L. Pilyushenko, V. A. Belevitin, Y. V. Pettik, E. S. Klimenko and I. P. Degtyarenko: ‘The influence of vibration treatment on the structure and properties of iron and steel castings’, Chem. Petrol. Eng., 1992, 28, (6), 401–402. doi: 10.1007/BF01148990
   Google Scholar
• K. B. Nie, X. J. Wang, K. Wu, X. S. Hu, M. Y. Zheng and L. Xu: ‘Microstructure and tensile properties of micro-SiC particles reinforced magnesium matrix composites produced by semisolid stirring assisted ultrasonic vibration’, Mater. Sci. Eng. A, 2011, A528, (29–30), 8709–8714. doi: 10.1016/j.msea.2011.08.035
   Web of Science ®Google Scholar
• V. O. Abramov, O. V. Abramov, F. Sommer and D. Orlov: ‘Properties of Al–Pb base alloys applying electromagnetic forces and ultrasonic vibration during casting’, Mater. Lett., 1995, 23, (1–3), 17–20. doi: 10.1016/0167-577X(95)00275-8
   Web of Science ®Google Scholar
• W. Wu: ‘Mechanical behavior of the precision component after synchronous vibratory joining’, 2005, 5650, 438–445.
   Google Scholar
• T. S.: ‘Effects of transverse oscillation on tensile properties of mild steel weldments’, ISIJ Int., 1999, 39, (6), 570–574. doi: 10.2355/isijinternational.39.570
   Web of Science ®Google Scholar
• B. J. Kim, Y. R. Son, J. O. Yun and J. S. Lee: ‘Residual stress relief and redistribution of welded metals by vibratory stress relaxation’, Mater. Sci. Forum, 2008, 580–582, 419–423. doi: 10.4028/www.scientific.net/MSF.580-582.419
   Google Scholar
• H. Xu, X. Jian, T. T. Meek and Q. Han: ‘Ultrasonic degassing of molten aluminium under reduced pressure’, Proc. of The Technical Sessions at the TMS Aluminum Committee at the 134th TMS Annual Meeting on ‘Light metals’, San Francisco, California, February 13–17, 2005, (ed. H. Kvande., 915–919.
   Google Scholar
• D. P. Shukla, D. B. Goel and P. C. Pandey: ‘Effect of vibration on the formation of porosity in aluminum alloy ingots’, Metall. Trans. B, 1980, 11B, (1), 166–168. doi: 10.1007/BF02657187
   Web of Science ®Google Scholar
• S. P. Tewari and A. Shanker: ‘Effects of longitudinal vibration on the mechanical properties of mild steel weldments’, Proc. IMechE B, 1993, 207B, (3), 173–177. doi: 10.1243/PIME_PROC_1993_207_078_02
   Web of Science ®Google Scholar
• T. Methong and B. Poopat: ‘The effect of ultrasonic vibration on properties of weld metal’, Key Eng. Mater., 2013, 545, 177–181. doi: 10.4028/www.scientific.net/KEM.545.177
   Google Scholar
• S. -L. Chen and L. -L. Hsu: ‘In-process vibration-assisted high power Nd:YAG pulsed laser ceramic–metal composite cladding on Al-alloys’, Opt. Laser Technol., 1998, 30, (5), 263–273. doi: 10.1016/S0030-3992(98)00048-6
   Web of Science ®Google Scholar
• S. P. Tewari: ‘Influence of longitudinal oscillation on tensile properties of medium carbon steel welds of different thickness’, Thammasat Int. J. Sci. Technol., 2009, 14, (4), 17–27.
   Google Scholar
• T. S. P and S. Anand: ‘Effects of longitudinal vibration on hardness of the weldments’, ISIJ Int., 1993, 33, (12), 1265–1269. doi: 10.2355/isijinternational.33.1265
   Web of Science ®Google Scholar
• T. S: ‘Effects of oscillation on impact property of weldments’, ISIJ Int., 1999, 39, (8), 809–812. doi: 10.2355/isijinternational.39.809
   Web of Science ®Google Scholar
• H. Matsui and S. Shionoya: ‘Reduction of blowholes by vibration of the molten pool in arc welding of galvanised carbon steel sheet’, Weld. Int., 1998, 12, (12), 959–965. doi: 10.1080/09507119809448542
   Google Scholar
• A. S. M. Y. Munsi, A. J. Waddell and C. A. Walker: ‘Vibratory weld conditioning — the effect of rigid body motion vibration during welding’, Strain, 1999, 35, (4), 139–143. doi: 10.1111/j.1475-1305.1999.tb01152.x
   Web of Science ®Google Scholar
• W. W: ‘Mechanical behavior of vibration-arc-welded alloy 690’, Mater. Trans. JIM, 1999, 40, (12), 1456–1460. doi: 10.2320/matertrans1989.40.1456
   Web of Science ®Google Scholar
• W. Wu: ‘Influence of vibration frequency on solidification of weldments’, Scr. Mater., 2000, 42, (7), 661–665. doi: 10.1016/S1359-6462(99)00416-9
   Web of Science ®Google Scholar
• A. S. M. Y. Munsi, A. J. Waddell and C. A. Walker: ‘The effect of vibratory stress on the welding microstructure and residual stress distribution’, Proc. IMechE L, 2001, 215L, (L2), 99–111.
   Google Scholar
• A. S. M. Y. Munsi, A. J. Waddell and C. A. Walker: ‘Modification of welding stresses by flexural vibration during welding’, Sci. Technol. Weld. Join., 2001, 6, (3), 133–138. doi: 10.1179/136217101101538668
   Web of Science ®Google Scholar
• B. Pučko and V. Gliha: ‘Effect of vibration on weld metal hardness and toughness’, Sci. Technol. Weld. Join., 2005, 10, (3), 335–338. doi: 10.1179/174329305X40651
   Web of Science ®Google Scholar
• Z. Q. Zhu, L. Chen and D. Rao: ‘Relieving welding residual stress by applying vibratory weld conditioning’, Mater. Sci. Forum, 2005, 490–491, 475–480. doi: 10.4028/www.scientific.net/MSF.490-491.475
   Google Scholar
• B. Pucko: ‘Charpy toughness of vibrated microstructures’, Metalurgija, 2005, 44, (2), 103–106.
   Web of Science ®Google Scholar
• S. Aoki, T. Nishimura and T. Hiroi: ‘Reduction method for residual stress of welded joint using random vibration’, Nucl. Eng. Des., 2005, 235, (14), 1441–1445. doi: 10.1016/j.nucengdes.2005.02.005
   Web of Science ®Google Scholar
• Y. Cui, C. L. Xu and Q. Han: ‘Effect of ultrasonic vibration on unmixed zone formation’, Scr. Mater., 2006, 55, (11), 975–978. doi: 10.1016/j.scriptamat.2006.08.035
   Web of Science ®Google Scholar
• B. Pučko and V. Gliha: ‘Charpy toughness and microstructure of vibrated weld metal’, Sci. Technol. Weld. Join., 2006, 11, (3), 289–294. doi: 10.1179/174329306X102075
   Web of Science ®Google Scholar
• S. Aoki, T. Nishimura, T. Hiroi and S. Hirai: ‘Reduction of residual stress of welded joint using local plasticity caused by ultrasonic vibration’, Key Eng. Mater., 2007, 340–341, 1455–1460. doi: 10.4028/www.scientific.net/KEM.340-341.1455
   Google Scholar
• J. J. Xu, L. G. Chen and C. Z. Ni: ‘Effects of vibratory weld conditioning on residual stresses and transverse contraction distortions in multipass welding’, Sci. Technol. Weld. Join., 2006, 11, (4), 374–378. doi: 10.1179/174329306X113325
   Web of Science ®Google Scholar
• J. Xu, L. Chen and C. Ni: ‘Effect of vibratory weld conditioning on the residual stresses and distortion in multipass girth-butt welded pipes’, Int. J. Pres. Ves. Pip., 2007, 84, (5), 298–303. doi: 10.1016/j.ijpvp.2006.11.004
   Web of Science ®Google Scholar
• Q. Lu, L. Chen and C. Ni: ‘Improving welded valve quality by vibratory weld conditioning’, Mater. Sci. Eng. A, 2007, A457, (1–2), 246–253. doi: 10.1016/j.msea.2006.12.120
   Web of Science ®Google Scholar
• Q. Lu, L. Chen and C. Ni: ‘Effect of vibratory weld conditioning on welded valve properties’, Mech. Mater., 2008, 40, (7), 565–574. doi: 10.1016/j.mechmat.2007.11.001
   Web of Science ®Google Scholar
• B. Pučko: ‘Effect of vibratory weld conditioning on weld impact toughness’, Mater. Manuf. Processes, 2009, 24, (7–8), 766–771. doi: 10.1080/10426910902812697
   Web of Science ®Google Scholar
• J. J. Xu, L. G. Chen and C. Z. Ni: ‘Low stress welding technology without post-weld heat treatment’, Mater. Sci. Technol., 2009, 25, (8), 976–980. doi: 10.1179/174328408X369393
   Web of Science ®Google Scholar
• K. Balasubramanian, D. Kesavan and V. Balusamy: ‘Studies on the effect of vibration on hot cracking and grain size in AA7075 aluminum alloy welding’, Int. J. Eng. Sci. Technol., 2011, 3, (1), 681–686.
   Google Scholar
• A. R. Hussein, N. A. A. Jail and A. R. Abu Talib: ‘Improvement of mechanical welding properties by using induced harmonic vibration’, J. Appl. Sci., 2011, 11, (2), 348–353. doi: 10.3923/jas.2011.348.353
   Google Scholar
• R. Dehmolaei, M. Shamanian and A. Kermanpur: ‘Effect of electromagnetic vibration on the unmixed zone formation in 25Cr–35Ni heat resistant steel/alloy 800 dissimilar welds’, Mater. Charact., 2008, 59, (12), 1814–1817. doi: 10.1016/j.matchar.2008.05.003
   Web of Science ®Google Scholar
• S. P. Tewari and A. Shanker: ‘Effects of longitudinal vibration on tensile properties of weldments’, Weld. J., 1994, 73, 11.
   Google Scholar
• C. H. Lee, G. C. Jang, H. C. Park and K. H. Chang: ‘Effect of vibration during welding on the fatigue strength of structural steel weldments’, Solid State Phenom., 2007, 124–126, 1329–1332. doi: 10.4028/www.scientific.net/SSP.124-126.1329
   Google Scholar
• H. Dong, L. Yang, C. Dong and S. Kou: ‘Improving arc joining of Al to steel and Al to stainless steel’, Mater. Sci. Eng. A, 2012, A534, 424–435. doi: 10.1016/j.msea.2011.11.090
   Web of Science ®Google Scholar
• Y. Cui, C. Xu and Q. Han: ‘Microstructure improvement in weld metal using ultrasonic vibrations’, Adv. Eng. Mater., 2007, 9, (3), 161–163. doi: 10.1002/adem.200600228
   Web of Science ®Google Scholar
• K. K. Chen and Y. S. Zhang: ‘Numerical analysis of temperature distribution during ultrasonic welding process for dissimilar automotive alloys’, Sci. Technol. Weld. Join., 2015, 20, (6), 522–531. doi: 10.1179/1362171815Y.0000000022
   Web of Science ®Google Scholar
• C. Xu, G. Sheng, H. Wang and X. Yuan: ‘Reinforcement of Mg/Ti joints using ultrasonic assisted tungsten inert gas welding–brazing technology’, Sci. Technol. Weld. Join., 2014, 19, (8), 703–707. doi: 10.1179/1362171814Y.0000000245
   Web of Science ®Google Scholar
• X. C. Liu, C. S. Wu and G. K. Padhy: ‘Improved weld macrosection, microstructure and mechanical properties of 2024Al-T4 butt joints in ultrasonic vibration enhanced friction stir welding, Sci’, Technol. Weld. Join., 2015, 20, (4), 345–352. doi: 10.1179/1362171815Y.0000000021
   Web of Science ®Google Scholar
• H. Gao, R. K. Dutta, R. M. Huizenga, M. Amirthalingam, M. J. M. Hermans, T. Buslaps and I. M. Richardson: ‘Stress relaxation due to ultrasonic impact treatment on multi-pass welds’, Sci. Technol. Weld. Join., 2014, 19, (6), 505–513. doi: 10.1179/1362171814Y.0000000219
   Web of Science ®Google Scholar
• Y. Ye, X. Li, J. Kuang, Y. Geng and G. Tang: ‘Effects of electropulsing assisted ultrasonic impact treatment on welded components’, Mater. Sci. Technol., 2015, DOI 10.1179/1743284715Y.0000000078.
   Web of Science ®Google Scholar
• F. Matsuda, H. Nakagawa, K. Nakata and R. Ayani: ‘Effect of electromagnetic stirring on weld solidification structure of aluminium alloys (report I) – investigation on GTA weld metal of thin sheet’, Trans. JWRI, 1978, 7, (1), 111–127.
   Google Scholar
• S. Gräf, G. Staupendahl, C. Seiser, B. -J. Meyer and F. A. Müller: ‘Enhanced melt pool stirring in welding with dynamic polarised laser beam’, Sci. Technol. Weld. Join., 2010, 15, (3), 208–212. doi: 10.1179/136217110X12665778348623
   Web of Science ®Google Scholar
• H. Matsui, T. Chiba and K. Yamazaki: ‘Detection and amplification of the molten pool natural oscillation in consumable electrode arc welding’, Weld. Int., 2014, 28, 5–12. doi: 10.1080/09507116.2012.715879
   Google Scholar
• C. D. Sorensen and T. W. Eagar: ‘Modeling of oscillations in partially penetrated weld pools’, J. Dyn. Syst. Meas. Contr., 1990, 112, 469–474. doi: 10.1115/1.2896166
   Web of Science ®Google Scholar
• H. Maruo and Y. Hirata: ‘Natural frequency and oscillation modes of weld pools. 1st report: weld pool oscillation in full penetration welding of thin plate’, Weld. Int., 1993, 7, (8), 614–619. doi: 10.1080/09507119309548457
   Google Scholar
• K. Andersen, G. E. Cook, R. J. Barnett and A. M. Strauss: ‘Synchronous weld pool oscillation for monitoring and control’, IEEE Trans. Ind. Appl., 1997, 33, (2), 464–471. doi: 10.1109/28.568011
   Web of Science ®Google Scholar
• K. Pal and S. Pal: ‘Effect of pulse parameters on weld quality in pulsed gas metal arc welding: a review’, J. Mater. Eng. Perform., 2011, 20, (6), 918–931. doi: 10.1007/s11665-010-9717-y
   Web of Science ®Google Scholar
• C. D. Sorensen and T. W. Eagar: ‘Measurement of oscillations in partially penetrated weld pools through spectral analysis’, J. Dyn. Syst. Meas. Contr., 1990, 112, 463–468. doi: 10.1115/1.2896165
   Web of Science ®Google Scholar
• A. J. R. Aendenroomer and G. Den Ouden: ‘Weld pool oscillation as a tool for penetration sensing during pulsed GTA welding’, Weld. J., 77, (5), 181s–187s.
   Google Scholar
• H. Yamamoto, S. Harada, T. Ueyama, S. Ogawa, F. Matsuda and K. Nakata: ‘Beneficial effect of low frequency pulsed MIG welding on grain refinement of weld metal and improvement of solidification crack susceptibility for aluminium alloy’, Weld. Int., 1993, 7, (8), 593–598. doi: 10.1080/09507119309548453
   Google Scholar
• R. J. Renwick and R. W. Richardson: ‘Experimental investigation of GTA weld pool oscillations’, Suppl. Weld. J., 1983, 29s–35s.
   Google Scholar
• Y. Xiao and G. Den Ouden: ‘A study of GTA weld pool oscillation’, Weld. J., 1990, 69, (8), S289–S293.
   Web of Science ®Google Scholar
• J. J. Wang and X. O. Hong: ‘Research on twin-arc TIG welding with ultrasonic excitation and its effect to weld’, Key Eng. Mater., 2010, 450, 300–303. doi: 10.4028/www.scientific.net/KEM.450.300
   Google Scholar
• N. Kishore Babu and C. E. Cross: ‘Grain refinement of AZ31 magnesium alloy weldments by AC pulsing technique’, Metall. Mater. Trans. A, 2012, 43A, (11), 4145–4154. doi: 10.1007/s11661-012-1241-2
   Web of Science ®Google Scholar
• Y. H. Xiao and G. den Ouden: ‘Weld pool oscillation during GTA welding of mild steel’, Weld. J., 1993, 72, (8)
   Web of Science ®Google Scholar
• A. Liu, X. Tang and F. Lu: ‘Arc profile characteristics of Al alloy in double-pulsed GMAW’, Int. J. Adv. Manuf. Technol., 2013, 65, 1–7. doi: 10.1007/s00170-012-4141-0
   Web of Science ®Google Scholar
• A. Krajewski, W. Włosiński, T. Chmielewski and P. Kołodziejczak: ‘Ultrasonic-vibration assisted arc-welding of aluminum alloys’, Bull. Pol. Acad. Sci. Tech. Sci., 2012, 60, (4), 841–852.
   Web of Science ®Google Scholar
• J. Ju, Y. Suga and K. Ogawa: ‘Penetration control by monitoring molten pool oscillation in TIG arc welding’ ‘Proc. 12th Int. Offshore and Polar Engineering Conf., Kitakyushu, Japan, May 2002’, 241–246; 2002, International Society of Offshore & Polar Engineering.
   Google Scholar
• J. Singh, G. Kumar and N. Garg: ‘Influence of vibrations in arc welding over mechanical properties and microstructure of butt-welded-joints’, Int. J. Sci. Technol., 2012, 2, (1), 1–6.
   Google Scholar
• T. Watanabe, M. Shiroki, A. Yanagisawa and T. Sasaki: ‘Improvement of mechanical properties of ferritic stainless steel weld metal by ultrasonic vibration’, J. Mater. Process. Technol., 2010, 210, (12), 1646–1651. doi: 10.1016/j.jmatprotec.2010.05.015
   Web of Science ®Google Scholar
• C. S. Wu, M. A. Chen and S. K. Li: ‘Analysis of excited droplet oscillation and detachment in active control of metal transfer’, Comput. Mater. Sci., 2004, 31, (1–2), 147–154. doi: 10.1016/j.commatsci.2004.02.002
   Web of Science ®Google Scholar
• M. A. Chen, C. S. Wu, S. K. Li and Y. M. Zhang: ‘Analysis of active control of metal transfer in modified pulsed GMAW’, Sci. Technol. Weld. Join., 2006, 12, (1), 10–14. doi: 10.1179/174329306X131848
   Web of Science ®Google Scholar
• B. Y. B. Yudodibroto, M. J. M. Hermans, Y. Hirata, G. den Ouden and I. M. Richardson: ‘Pendant droplet oscillation during GMAW’, Sci. Technol. Weld. Join., 2006, 11, (3), 308–314. doi: 10.1179/174329306X101409
   Web of Science ®Google Scholar
• Y. Hirata, K. Tsujimura, B. Y. B. Yudodibroto, M. J. M. Hermans and I. M. Richardson: ‘Modeling of molten drop oscillation in gas shielded metal arc welding’, Mater. Sci. Forum, 2007, 539–543, 3973–3978. doi: 10.4028/www.scientific.net/MSF.539-543.3973
   Google Scholar
• A. Grill: ‘Effect of arc oscillations on the temperature distribution and microstructure in GTA tantalum welds’, Metall. Trans. B, 1981, 12B, (4), 667–674. doi: 10.1007/BF02654135
   Web of Science ®Google Scholar
• S. Kou and Y. Le: ‘Grain structure and solidification cracking in oscillated arc welds of 5052 aluminum alloy’, Metall. Trans. A, 1985, 16A, (7), 1345–1352. doi: 10.1007/BF02670338
   Web of Science ®Google Scholar
• C. M. D. Starling, P. V. Marques and P. J. Modenesi: ‘Statistical modelling of narrow-gap GTA welding with magnetic arc oscillation’, J. Mater. Process. Technol., 1995, 51, (1–4), 37–49. doi: 10.1016/0924-0136(94)01356-6
   Web of Science ®Google Scholar
• S. Sundaresan and G. D. J. Ram: ‘Use of magnetic arc oscillation for grain refinement of gas tungsten arc welds in α–β titanium alloys’, Sci. Technol. Weld. Join., 1999, 4, (3), 151–160. doi: 10.1179/136217199101537699
   Web of Science ®Google Scholar
• C. Zhang, M. Wu, H. Hao and Z. Han: ‘Research on resonance mechanism of arc-ultrasonic’, J. Mater. Sci. Tehnol. 2009, 16, (05), 525–528.
   Google Scholar
• S. R. K. Rao, G. M. Reddy, M. Kamaraj and K. P. Rao: ‘Grain refinement through arc manipulation techniques in Al–Cu alloy GTA welds’, Mater. Sci. Eng. A,, 2005, A404, (1–2), 227–234. doi: 10.1016/j.msea.2005.05.080
   Web of Science ®Google Scholar
• C. W. Kuo, S. M. Yang, J. H. Chen, G. H. Lai, Y. C. Chen, Y. T. Chang and W. T. Wu: ‘Preferred orientation of inconel 690 after vibration arc oscillation welding’, Mater. Trans., 2008, 49, 688–690. doi: 10.2320/matertrans.MEP2007305
   Web of Science ®Google Scholar
• Y. C. Lim, X. Yu, J. H. Cho, J. Sosa, D. F. Farson, S. S. Babu, S. McCracken and B. Flesner: ‘Effect of magnetic stirring on grain structure refinement. Part 2 – nickel alloy weld overlays’, Sci. Technol. Weld. Join., 2010, 15, (5), 400–406. doi: 10.1179/136217110X12720264008231
   Web of Science ®Google Scholar
• S. -S. Zhang and Z. -D. Zou: ‘Effects of applied magnetic field on twin-wire indirect arc shapes’, Front. Mater. Sci. China, 2010, 4, (3), 321–324. doi: 10.1007/s11706-010-0096-y
   Google Scholar
• N. S. Biradar and R. Raman: ‘Investigation of hot cracking behavior in transverse mechanically arc oscillated autogenous AA2014 T6 TIG welds’, Metall. Mater. Trans. A, 2014, 43A, (9), 3179–3191.
   Web of Science ®Google Scholar
• N. S. Biradar and R. Raman: ‘Grain refinement in Al–Mg–Si alloy TIG welds using transverse mechanical arc oscillation’, J. Mater. Eng. Perform., 2012, 21, (11), 2495–2502. doi: 10.1007/s11665-012-0207-2
   Web of Science ®Google Scholar
• S. Mahajan, N. S. Biradar, R. Raman and S. Mishra: ‘Effect of mechanical arc oscillation on the grain structure of mild steel weld metal’, Trans Ind. Inst. Met., 2012, 65, (2), 171–177. doi: 10.1007/s12666-012-0118-9
   Web of Science ®Google Scholar
• J. Wang, J. Zhu, P. Fu, R. Su, W. Han and F. Yang: ‘A swing arc system for narrow gap GMA welding’, ISIJ Int., 52, (1), 110–114. doi: 10.2355/isijinternational.52.110
   Web of Science ®Google Scholar
• L. A. Jones, T. W. Eagar and J. H. Lang: ‘Investigations of drop attachment control in gas metal arc welding’ ‘Proc. 3rd Int. Conf. on Trends in welding science and technology, Gatlinburg, TN, USA, June’, 1009–1013; 1992.
   Google Scholar
• Q. Sun, S. Lin, C. Yang, Y. Fan and G. Zhao: ‘The arc characteristic of ultrasonic assisted TIG welding’, China Weld., 2008, 17, (4), 6.
   Google Scholar
• Y. Fan, C. Fan, C. Yang, W. Liu and S. Lin: ‘Development and preliminary study on the ultrasonic assisted GMAW method’, China Weld., 2010, 19, (4), 1–5.
   Google Scholar
• Y. Y. Fan, C. L. Yang, S. B. Lin, C. L. Fan and W. G. Liu: ‘Ultrasonic wave assisted GMAW’, Weld. J., 91, (3), 91s–99s
   Google Scholar