31
Views
6
CrossRef citations to date
0
Altmetric
Articles

Modelling and experimental development of the direct thermal method of rheocasting

Pages 325-332 | Published online: 18 Jul 2013

References

  • D. B. Spencer, R. Mehrabian and M. C. Flemings: Metall Trans. A, 1972, 3A, 1925–1932.
  • J. L. Meyer: in 'Light metals', 1215-1230; 1992, Warrendale, PA, TMS.
  • J. Campbell: Int. Metals Rev., 1981, 2, 71–108.
  • Q. Y. Pan, M. Findon and D. Apelian: Proc. 8th Int. Conf. on 'Semi-solid processing of alloys and composites', Limassol, Cyprus, 2004.
  • J. Wannasin, R. A. Martinez and M. C. Flemings: Scr. Mater., 2006, 55, 115–118.
  • D. H. Kirkwood: Int. Mater. Rev., 1994, 39, 173–189.
  • P. Kapraros, D. H. Kirkwood and C. M. Sellars: J. Phys. IV, 1993, 3, 835–840.
  • W. R. Loue and M. Suery: Mater. Sci. Eng. A, 1995, A203, 1-13.
  • E. J. Zoqui and M. H. Robert: J. Mater. Proc. Technol, 1998, 78, 198–203.
  • H. Kaufman, W. Wabusseg and P. J. Uggowitzer: Proc. 6th Int. Conf on ‘Semisolid processing of alloys and composites’, Brescia, Italy, 2000, Edimet, 457-462.
  • J.-K. Lee and S. K. Kim: Mater. Set Eng. A, 2007, A449—A451, 680-683.
  • J. Aguilar, M. Fehlbier, A. Ludwig, A. Buhrig-Polaczek and P. R. Sahm: Mater. Set Eng. A, 2004, A375—A377, 651-655.
  • T. Grimming, J. Aguilar, M. Fehlbier and A. Buhrig-Polaczek: Proc. 8th Int. Conf. on 'Semi-solid processing of alloys and composites', Limassol, Cyprus 2004.
  • J. Jorstad, M. Thieman and R. Sahm: Proc. 8th Int. Conf. on
  • M. Qian: Acta Mater., 2006, 54, 2241–2252.
  • M. J. Hussey, D. J. Browne, D. Brabazon and A. J. Carr: Proc. 7th Int. Conf. on ‘Semi-solid processing of alloys and composites’, (eds Y. Tsutsui, M. Kiuchi and K. Ichikawa), Tsukaba, Japan, 2002, National Institute of Advanced Industrial Science and Technology, Japan and Japan Society for Technology of Plasticity, 575-580.
  • D. J. Browne, M. J. Hussey, A. J. Carr and D. Brabazon: Int. J. Cast Metals Res., 2003, 16, 418–426.
  • ASM International Handbook Committee: 'ASM metals handbook’, 9th edn, Vol. 15, ‘Casting’ 1988, Metals Park, OH, ASM International.
  • F. Pahlevani, Y. Endo, J. Yaokawa, M. Itamura, M. Kikuchi, O. Nagasawa and K. Anzai: Solid State Phenom. , 2006, 116-117, 358-361.
  • F. Pahlevani, J. Yaokawa and K. Anzai: Mater. Set Forum, 2006, 519–521, 1835-1840.
  • D. Brabazon: 'Processing and properties of rheocast alloys', PhD thesis, National University of Ireland, University College Dublin, Ireland, 2001.
  • J. R. Calvert and R. A. Farrar: 'An engineering data book'; 1999, Basingstoke, Hants, Palgrave.
  • J. Campbell: 'Castings', 175; 1991, Oxford, Butterworth-Heinemann.
  • M. W. ChaseJr: NIST-JANAF thermochemical tables', 4th edn, J. Phys. Chem. Ref. Data, Monograph 9; 1998, Woodbury, NY, American Institute of Physics.
  • P. N. Quested, K. C. Mills, R. F. Brooks, B. Monaghan, A. T. Dinsdale, A. Day, M. J. Richardson, R. J. L. Andon, R. Taylor and H. Szelagowski: in 'Modelling of casting, welding and advanced solidification processes VII', (ed. M. Cross and J. Campbell), 407-415; 1995, Warrendale, PA, TMS.
  • H. Szelagowski, R. Taylor, J. D. Hunt, P. N. Quested: in 'Solidification processing', (ed. J. Beech and H. Jones), 151-154; 1997, Sheffield, University of Sheffield.
  • W. H. Press, B. P. Flannery, S. A. Teukolsky and W. T. Vetterling: 'Numerical Recipes in C'; 1988, Cambridge, Cambridge University Press.
  • D. Brabazon, D. J. Browne and A. J. Carr: Mater. Set Eng. A, 2002, A326, 370-381.
  • N. Coone: 'Investigation of thermal boundary conditions in sand and permanent mould casting', Master's dissertation, National University of Ireland, University College Dublin, Ireland, 2003.
  • D. O'Mahoney and D. J. Browne: Exper. Ther. Fluid Set, 2000, 22, 111–112.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.