References
- D. B. Spencer, R. Mehrabian and M. C. Flemings: Metall Trans. A, 1972, 3A, 1925–1932.
- J. L. Meyer: in 'Light metals', 1215-1230; 1992, Warrendale, PA, TMS.
- J. Campbell: Int. Metals Rev., 1981, 2, 71–108.
- Q. Y. Pan, M. Findon and D. Apelian: Proc. 8th Int. Conf. on 'Semi-solid processing of alloys and composites', Limassol, Cyprus, 2004.
- J. Wannasin, R. A. Martinez and M. C. Flemings: Scr. Mater., 2006, 55, 115–118.
- D. H. Kirkwood: Int. Mater. Rev., 1994, 39, 173–189.
- P. Kapraros, D. H. Kirkwood and C. M. Sellars: J. Phys. IV, 1993, 3, 835–840.
- W. R. Loue and M. Suery: Mater. Sci. Eng. A, 1995, A203, 1-13.
- E. J. Zoqui and M. H. Robert: J. Mater. Proc. Technol, 1998, 78, 198–203.
- H. Kaufman, W. Wabusseg and P. J. Uggowitzer: Proc. 6th Int. Conf on ‘Semisolid processing of alloys and composites’, Brescia, Italy, 2000, Edimet, 457-462.
- J.-K. Lee and S. K. Kim: Mater. Set Eng. A, 2007, A449—A451, 680-683.
- J. Aguilar, M. Fehlbier, A. Ludwig, A. Buhrig-Polaczek and P. R. Sahm: Mater. Set Eng. A, 2004, A375—A377, 651-655.
- T. Grimming, J. Aguilar, M. Fehlbier and A. Buhrig-Polaczek: Proc. 8th Int. Conf. on 'Semi-solid processing of alloys and composites', Limassol, Cyprus 2004.
- J. Jorstad, M. Thieman and R. Sahm: Proc. 8th Int. Conf. on
- M. Qian: Acta Mater., 2006, 54, 2241–2252.
- M. J. Hussey, D. J. Browne, D. Brabazon and A. J. Carr: Proc. 7th Int. Conf. on ‘Semi-solid processing of alloys and composites’, (eds Y. Tsutsui, M. Kiuchi and K. Ichikawa), Tsukaba, Japan, 2002, National Institute of Advanced Industrial Science and Technology, Japan and Japan Society for Technology of Plasticity, 575-580.
- D. J. Browne, M. J. Hussey, A. J. Carr and D. Brabazon: Int. J. Cast Metals Res., 2003, 16, 418–426.
- ASM International Handbook Committee: 'ASM metals handbook’, 9th edn, Vol. 15, ‘Casting’ 1988, Metals Park, OH, ASM International.
- F. Pahlevani, Y. Endo, J. Yaokawa, M. Itamura, M. Kikuchi, O. Nagasawa and K. Anzai: Solid State Phenom. , 2006, 116-117, 358-361.
- F. Pahlevani, J. Yaokawa and K. Anzai: Mater. Set Forum, 2006, 519–521, 1835-1840.
- D. Brabazon: 'Processing and properties of rheocast alloys', PhD thesis, National University of Ireland, University College Dublin, Ireland, 2001.
- J. R. Calvert and R. A. Farrar: 'An engineering data book'; 1999, Basingstoke, Hants, Palgrave.
- J. Campbell: 'Castings', 175; 1991, Oxford, Butterworth-Heinemann.
- M. W. ChaseJr: NIST-JANAF thermochemical tables', 4th edn, J. Phys. Chem. Ref. Data, Monograph 9; 1998, Woodbury, NY, American Institute of Physics.
- P. N. Quested, K. C. Mills, R. F. Brooks, B. Monaghan, A. T. Dinsdale, A. Day, M. J. Richardson, R. J. L. Andon, R. Taylor and H. Szelagowski: in 'Modelling of casting, welding and advanced solidification processes VII', (ed. M. Cross and J. Campbell), 407-415; 1995, Warrendale, PA, TMS.
- H. Szelagowski, R. Taylor, J. D. Hunt, P. N. Quested: in 'Solidification processing', (ed. J. Beech and H. Jones), 151-154; 1997, Sheffield, University of Sheffield.
- W. H. Press, B. P. Flannery, S. A. Teukolsky and W. T. Vetterling: 'Numerical Recipes in C'; 1988, Cambridge, Cambridge University Press.
- D. Brabazon, D. J. Browne and A. J. Carr: Mater. Set Eng. A, 2002, A326, 370-381.
- N. Coone: 'Investigation of thermal boundary conditions in sand and permanent mould casting', Master's dissertation, National University of Ireland, University College Dublin, Ireland, 2003.
- D. O'Mahoney and D. J. Browne: Exper. Ther. Fluid Set, 2000, 22, 111–112.