References
- K. L. McDanels: Metall Trans. A, 1985, 16A, 1105–1115.
- S. V. Nair, J. K. Tien and R. C. Bates: Int. Met. Rev., 1985, 30, (6), 275–290.
- A. V. Smith and D. D. L. Chung: J. Mater. Sci., 1996, 31, 5961–5973.
- K. K. Chawla: ‘Composite materials — science and engineering’, 2nd edn, 164; 1998, New York, Springer.
- T. Clyne and P. Withers: ‘An introduction to metal matrix composites’; 1993, Cambridge, Cambridge University Press.
- D. B. Miracle: Compos. Set Technol, 2005, 65, 2526–2540.
- W. H. Hunt, Jr: ‘Metal matrix composites: applications’, in ‘Encyclopedia of materials: science and technology’, (ed. K. H. Jurgen Buschow et al), 5442-5446; 2008, New York, Elsevier.
- G. Hirt, R. Cremer, T. Witulski and H.C. Tinius: Mater. Design, 1997, 18, (4/6), 315-321.
- J. E. Allison and G. S. Cole: JOM, 1993, 45, (1), 19–24.
- R. Mitra, W. A. Chiou, M. E. Fine, J. R. Weertman: J. Mater. Res., 1993, 8, 2380–2392.
- A. K. Kuruvilla, K. S. Prasad, V. V. Bhanuprasad and Y. R. Mahajan: Scr. Metall Mater., 1990, 24, (5), 873–878.
- J. V. Wood, P. Davies and J. L. F. Kellie: Mater. Sci. Technol, 1993, 9, 833–840.
- K. L. Tee, L. Lu and M. O. Lai: Wear, 2000, 240, 59–64.
- R. Mitra and Y. R. Mahajan: Bull. Mater. Sci., 1995, 18, (4), 405–434.
- D. L. Davidson: Metall Trans. A., 1987, 18A, 2115–2128.
- M. Manoharan and J. J. Lewandowski: Mater. Sci. Eng. A, 1992, A150, 179-186.
- A. F. Whitehouse and T. W. Clyne: Acta Metall Mater., 1993, 41, (6), 1701–1711.
- M. Song and D. Xiao: Mater. Sci. Eng. A, 2008, A474, 371-375.
- M. Kiuchi, S. Sugiyama and K. Arai: J. Jpn Soc. Technol. Plast., 1982, 23, 915–923.
- M. Kiuchi: ‘Metal forming in mushy state’, in ‘Plasticity and modern metal-forming technology’, (ed. T. Z. Blazynski), 289-313; 1989, London, Elsevier Applied Science.
- M. Kiuchi: Ann. CIRP, 1991, 40, (1), 259–262.
- W. Lapkowski: J. Mech. Work. Technol., 1989, 18, 305–313.
- W. Lapkowski and J. Sinczak: J. Mater. Proc. Technol, 1992, 32, 271–277.
- W. Lapkowski, J. Sinczak and S. Rusz: J. Mater. Proc. Technol, 1997, 63, 260–264.
- M. C. Flemings: Metall Trans. A, 1991, 22A, 957–981.
- W. G. Cho and C. G. Kang: J. Mater. Proc. Technol, 2000, 105, 269–277.
- S. W. Youn, C. G. Kang and P. K. Seo: J Mater. Process. Technol, 2002, 130-131, 574-580.
- S. V. Kamat, J. P. Hirth and R. Mehrabian: Acta Metall, 1989, 37, (9), 2395–2402.
- S. Skolianos: Mater. Sci. Eng. A, 1996, A369, 76-82.
- E. J. Zoqui and M. H. Robert: J. Mater. Proc. Technol., 1998, 78, 198–203.
- J. L. Jorstad, Q. Y. Pan and D. Apelian: Mater. Sci. Eng. A, 2005, A413—A414, 186-191.
- M. A. Herbert, C. Sarkar, R. Mitra and M. Chakraborty: Metall Mater. Trans. A, 2007, 38A, 2110–2126.
- M. A. Herbert, R. Maiti, R. Mitra and M. Chakraborty: Solid State Phenom. , 2006, 116-117, 217-220.
- M. A. Herbert, R. Maiti, R. Mitra and M. Chakraborty: Wear, 2008, 265, (11-12), 1606–1618.
- M. A. Herbert: ‘Some studies on the mushy state rolling of Al-4.5Cu alloy based in-situ composites reinforced with TiB2 or TiC particles’, PhD thesis, Indian Institute of Technology, Kharagpur, West Bengal, India, 2007.
- In 'ASM handbook', Vol. 3, 1.23-2.44; 1992, Materials Park, OH, ASM International.
- E. Tzimas and A. Zavaliangos: J. Mater. Sci., 2000, 35, 5319–5329.
- ‘Methods for determining the average grain size’, E 112-96, ASTM, Philadelphia, PA, USA, 1996.
- ‘Standard test methods for tension testing of metallic materials’, E 8M-08, ASTM, Philadelphia, PA, USA, 2008.
- G. E. Dieter: ‘Mechanical metallurgy’, 3rd edn, 586; 1986, New York, McGraw-Hill Book Co.
- L. M. Brown and J. D. Embury: ‘The initiation and growth of voids at second phase particles’, Proc. 3rd Int. Conf. on ‘Strength of metals and alloys’, 164-169; 1973, London, Institute of Metals.
- R. A. Martinez and M. C. Flemings: Metall Mater. Trans. A, 2005, 36A, 2205–10.