References
- T. J. Kim and D. Y. Yang: ‘Improvement of formability for the incremental sheet metal forming process’, Int. J. Mech. Sci., 2000, 42, 1271–1286.
- D. Young and J. Jeswiet: ‘Wall thickness variations in single-point incremental forming’, Proc. Inst. Mech.l Eng. B, J. Eng. Manuf., 2003, 217, 1571–1581.
- M. Skjoedt, N. Bay, B. Endelt and G. Ingarao: ‘Multi stage strategies for single point incremental forming of a cup’, Int. J. Mater. Form., 2008, ( Suppl. 1), 1199–1202.
- J. R. Duflou, J. Verbert, B. Belkassem, J. Gu, H. Sol, C. Henrard and A. M. Habraken: ‘Process window enhancement for single point incremental forming through multi-step toolpaths’, CIRP Ann. – Manuf. Technol., 2008, 57, 253–256.
- M. Skjoedt, M. B. Silva, P. A. F. Martins and N. Bay: ‘Strategies and limits in multi-stage single-point incremental forming’, J. Strain Anal., 2010, 45, 33–44.
- Z. Cui and L. Gao: ‘Studies on hole-flanging process using multistage incremental forming’, CIRP J. Manuf. Sci. Technol., 2010, 2, 124–128.
- R. Malhotra, A. Bhattacharya, A. Kumar, N. V. Reddy and J. Cao: ‘A new methodology for multi-pass single point incremental forming with mixed toolpaths’, CIRP Ann. – Manuf. Technol., 2011, 60, 323–326.
- D. K. Xu, R. Malhotra, N. V. Reddy, J. Chen and J. Cao: ‘Analytical prediction of stepped feature generation in multi-pass single point incremental forming’, J. Manuf. Process., 2012, 14, 487–494.
- J. C. Li, J. B. Hu, J. J. Pan and P. Geng: ‘Thickness distribution and design of a multi-stage process for sheet metal incremental forming’, Int. J. Adv. Manuf. Technol., 2012, 62, 981–988.
- J. C. Li, J. J. Shen and B. Wang: ‘A multipass incremental sheet forming strategy of a car taillight bracket’, Int. J. Adv. Manuf. Technol., 2013, 69, 2229–2236.
- Z. B. Liu, Y. L. Li and P. A. Meehan: ‘Vertical wall formation and material flow control for incremental sheet forming by revisiting multistage deformation path strategies’, Mater. Manuf. Process., 2013, 28, (5), 562–571.
- Z. B. Liu, W. J. T. Daniel, Y. L. Li, S. Liu and P. A. Meehan: ‘Multi-pass deformation design for incremental sheet forming: analytical modeling, finite element analysis and experimental validation’, J. Mater. Process Technol., 2014, 214, (3), 620–634.