References
- G. Wu, X. Zeng, G. Li, S. Yao and X. Wang: ‘Preparation and characterization of ceramic/metal duplex coatings deposited on AZ31 magnesium alloy by multi-magnetron sputtering’, Mater. Lett., 2006, 60, 674.
- X. Zeng, G. Wu and S. Yao: ‘Formation by reactive magnetron sputtering of TiN coating on Ti-implanted magnesium alloy’, Mater. Lett., 2006, 60, 2252.
- Z. Zhang, Q. Le, J. Cui and H. Liu: ‘Solidification structures of Mg-4Al-1Si magnesium alloy treated by ultrasonic field’, Rare Metal Mater. Eng., 2013, 42, 574.
- X. Chen, X. Huang, F. Pan, A. Tang, J. Wang and D. Zhang: ‘Effects of heat treatment on microstructure and mechanical properties of ZK60 Mg alloy’, Trans. Nonferrous Met. Soc. China, 2011, 21, 754.
- C. Wang, Z. Mu, B. Liu, H. Zang and X. Mu: ‘Composition and properties of silicon nitride thin films deposited by mid-frequency dual-target unbalanced magnetron sputtering’, J. Mater. Sci. Eng., 2011, 131, 331–332.
- Y. Yu and Y. Cheng: ‘Study of internal stress in silicon nitride dielectric thin films’, Vacuum Sci. Technol., 2001, 21, 51.
- G. Cheng, D. Han, C. Liang, X. Wu and R. Zheng: ‘Influence of residual stress on mechanical properties of TiAlN thin films’, Surf. Coat. Technol., 2013, 228, S329.
- M. Krottenthaler, C. Schmid, J. Schaufler, K. Durst and M. Göken: ‘A simple method for residual stress measurements in thin films by means of focused ion beam milling and digital image correlation’, Surf. Coat. Technol., 2013, 215, 248–250.
- S. K. Sharma and D. Young Kim: ‘Abnormal residual stress in nanostructured Al thin films grown on Ti/glass substrates’, Curr. Appl. Phy., 2013, 13, 1874–1876.
- S. Chen, B. Shen, J. Zhang, L. Wang and F. Sun: ‘Evaluation on residual stresses of silicon-doped CVD diamond films using X-ray diffraction and Raman spectroscopy’, Trans. Nonferrous Met. Soc. China, 2012, 22, 3021–3024.
- H. Liu, Q. Xu, X. Zhang, C. Wang and B. Tang: ‘Residual stress analysis of TiN film fabricated by plasma immersion ion implantation and deposition process’, Nucl. Instrum. Method.Phys. Res. B, 2013, 297, 2.
- M. Li, M. Zhuang, K. Yin and J. Wang: ‘Residual stress analysis on the Ti-bioglass coatings produced by high velocity flame spraying’, Trans. China Weld. Instit., 2009, 30, 66.
- H. Li, W. Yang, J. Wang and K. Yin: ‘Study of microstructure and properties in weld metal of TP304 steel under three processes’, Trans. China Weld. Instit., 2012, 33, 89–90.
- H. Li, M. Li, T. Han, J. Sun and J. Wang: ‘Elemental distribution in weld metal of low alloy steel during TIG welding’, Trans. China Weld. Instit., 2014, 35, 91–92.
- M. Lattemann, U. Helmersson and J. E. Greene: ‘Fully dense, non-faceted 111-textured high power impulse magnetron sputtering TiN films grown in the absence of substrate heating and bias’, Thin Solid Films, 2010, 518, 5978.
- G. Guisbiers, S. Strehle and M. Wautelet: ‘Modeling of residual stresses in thin films deposited by electron beam evaporation’, Microelectron. Eng., 2005, 82, 665–669.
- S. A. S. Rodrigues, A. G. Rolo, A. Khodorov, M. Pereira and M. J. M. Gomes: ‘Elemental distribution in weld metal of low alloy steel during TIG welding’, J. Europ. Ceram. Soc., 2010, 30, 521.