References
- Tang WC and Lo TY: ‘Shear strengthening of polystyrene aggregate concrete beams with near surface mounted GFRP bars’, Mater. Res. Innov., 2010, 14, (2), 138–145.
- Gencel O, Ozel C, Brostow W and Martnez-Barrera G: ‘Mechanical properties of self-compacting concrete reinforced with polypropylene fibers’, Mater. Res. Innov., 2011, 15, (3), 216–225.
- Kim JW, Kim HS and Lee DG: ‘Effect of molding condition on waviness profile of GFRP composites in compression molding’, Acta Phys. Pol. A, 2013, 123, (2), 337–340.
- Banakar P, Shivananda HK and Niranjan HB: ‘Influence of fiber orientation and thickness on tensile properties of laminated polymer composites’, Int. J. Pure Appl. Sci. Technol., 2012, 9, (1), 61–68.
- Wang Y, Zhou JQ and Zhang S: ‘Construction of real digital microstructures of nanocrystalline materials considering coupled grain size and grain orientation distributions’, Mater. Res. Innov., 2013, 17, (s1), S115–S118.
- Kumbuloglu O, Lassila LVJ, Turkun M and Vallittu PK: ‘Effect of various disinfection methods on bonding strength of glassfiber post to root canal dentine’, Mater. Res. Innov., 2012, 16, (2), 79–83.
- Do TT and Lee DJ: ‘Analysis of tensile properties for composites with wrinkled fabric, J. Mech. Sci. Technol., 2010, 24, (2), 471–479.
- Kim JW and Lee DG: ‘Creep and tensile properties of press molding joined GMT-sheets’, Trans. Nonferrous Met. Soc. China, 2011, 21, (s1), S170–S174.
- Kim D, Kim YH, Gururaja S and Ramulu M: ‘Processing and fiber content effects on the machinability of compression molded random direction short GFRP composites’, Int. J. Automot. Technol., 2010, 11, (6), 849–855.
- Kim JW and Lee DG: ‘Effect of fiber orientation and fiber contents on the tensile strength in fiber-reinforced composites’, J. Nanosci. Nanotechnol., 2010, 10, (5), 3650–3653.
- Kim JW, Lee JJ and Lee DG: ‘Measurement of fiber orientation angle in FRP by intensity method’, J. Mater. Process. Technol., 2008, 201, (1–3), 755–760.
- Kim JW, Kim HS and Lee DG: ‘Study on fiber orientation of weld line parts during injection molding of fiber reinforced plastic by image processing’, Mater. Res. Innov., 2011, 15, (1), S303–S306.