Advanced search
Publication Cover
Materials Research Innovations Volume 18, 2014 - Issue sup6: ICoSEM 2013
Submit an article Journal homepage
71
Views
1
CrossRef citations to date
0
Altmetric
Research Papers

Sintering properties of zirconia-based ceramic composite

W. J. Kelvin ChewDepartment of Mechanical EngineeringCentre of Advanced Manufacturing & Material Processing (AMMP), University of Malaya, 50603Kuala Lumpur, Malaysia
,
S. RameshDepartment of Mechanical EngineeringCentre of Advanced Manufacturing & Material Processing (AMMP), University of Malaya, 50603Kuala Lumpur, MalaysiaCorrespondence[email protected]
,
Y. H. WongDepartment of Mechanical EngineeringCentre of Advanced Manufacturing & Material Processing (AMMP), University of Malaya, 50603Kuala Lumpur, Malaysia
,
H. MisranUniversity of Tenaga Nasional, 43000Kajang, Selangor, Malaysia
,
F. YusufDepartment of Mechanical EngineeringCentre of Advanced Manufacturing & Material Processing (AMMP), University of Malaya, 50603Kuala Lumpur, Malaysia
,
C. Y. TanDepartment of Mechanical EngineeringCentre of Advanced Manufacturing & Material Processing (AMMP), University of Malaya, 50603Kuala Lumpur, Malaysia
,
M. AmiriyanFaculty of Science and EngineeringLaval University, Quebec, G1 V 0A6 Canada
,
R. ToloueiFaculty of Science and EngineeringLaval University, Quebec, G1 V 0A6 Canada
&
W. D. TengCeramics Technology GroupSIRIM Berhad, 40911Shah Alam, Malaysia
 show all
Pages S6-105-S6-108 | Published online: 05 Dec 2014

References

  • E. C. Bianchi, P. R. Aguir, E. J. da Silva, C. E. da Silva Jr. and C. A. Fortulan: ‘Advanced ceramics: evaluation of the ground surface’, Ceramica, 2003, 49, 174–177.
  • K. M. Patel, P. M. Pandey and P. V. Rao: ‘Optimisation of process parameteres for multi-performance charesteristics in EDM of Al2O3 ceramic composite’, Int. J. Adv. Manuf. Technol., 2010, 47, 1137–1147.
  • J. H. Lee, J. Y. Ju, C. H. Kim and Y. D. Shin: ‘A study on optimum spark plasma sintering conditions for conductive SiC-ZrB2 composites’, J. Electr. Eng. Technol., 2011, 6, 543–550.
  • W. Li, X. Zhang, C. Hong, W. Han and J. Han: ‘Preparation, microstructure and mechanical properties of ZrB2-ZrO2 ceramics’, J. Eur. Ceram. Soc., 2009, 29, 779–786.
  • S. D. Bakshi, B. Basu and S. K. Mishra: ‘Microstructure and mechanical properties of sinter-HIPed ZrO2-ZrB2 composites’, Composites A, 2006, 37, 2128–2135.
  • S. Salehi, O. Van der Biest and J. Vleugels: ‘Electrically conductive ZrO2-TiN composites’, J. Eur. Ceram. Soc., 2006, 26, 3173–3179.
  • S. K. Mishra, S. K. Das and V. Sherbacov: ‘Fabrication of Al2O3-ZrB2 in site composite by SHS dynamic compaction: a novel approach’, Composites Sci. Technol., 2007, 67, 2447–2453.
  • C. Sarbu, J. Vleugels and O. Van der Biest: ‘Phase instability in ZrO2-TiB2 composites’, J. Eur. Ceram. Soc., 2007, 27, 2203–2208.
  • ASTM E1876-97 (1998): ‘Standard Test Method for Dynamic Young's Modulus, Shear Modulus and Poisson's Ratio by Impulse Excitation of Vibration’, Annual Book of ASTM Standards.
  • K. Niihara, H. Morena and D. P. H. Hassleman: ‘Evaluation of KIc of brittle solids by the indentation method with low crack to indent ratios’, J. Mater. Sci. Lett., 1982, 1, 13–16.
  • H. Toraya, M. Yoshimura and S. Somiya: ‘Calibration curve for quantitative analysis of the monoclinic-tetragonal ZrO2 system by X-ray diffraction’, J. Am. Ceram. Soc., 1984, 67, C-119–C-120.
  • A. Muknopadhyay, B. Basu, S. D. Bakshi and S. K. Mishra: ‘Pressureless sintering of ZrO2-ZrB2 composites: Microstructure and properties’, Int. J. Refract. Met. Hard Mater., 2007, 25, 179–188.
  • B. Basu, J. Vleugels and O. Van der Biest: ‘Development of ZrO2-ZrB2 composites’, J. Alloys Compd., 2002, 334, 200–204.
  • B. Basu, T. Ventateswaran and D. Y. Kim: ‘Microstructure and properties of Spark Plasma-Sintered ZrO2-ZrB2 nanoceramic composites’, J. Am. Ceram. Soc., 2006, 89, 2405–2412.
  • A. L. Chamberlain, W. G. Fahrenholtz and G. E. Hilmas: ‘Pressureless sintering of zirconium diboride’, J. Am. Ceram. Soc., 2006, 89, 450–456.
  • S. Postrach and J. Potschke: ‘Pressureless sintering of Al2O3 containing up to 20 vol% zirconium diboride (ZrB2)’, J. Eur. Ceram. Soc., 2000, 20, 1459–1468.
  • D. Z. de Florio and R. Muccillo: ‘Effect of boron oxide on the cubic-to-monoclinic phase transition in yttria-stabilized zirconia’, Mater. Res. Bull., 2004, 39, 1539–1548.
  • R. H. J. Hannick, P. M. Kelly and B. C. Muddle: ‘Transformation toughening in zirconia-containing ceramics’, J. Am. Ceram. Soc., 2000, 83, 461–487.
  • S. Lopez-Esteban, J. F. Bartolome and J. S. Moya: ‘Mechanical performance of 3Y-TZP/Ni composites: Tensile, bending and uniaxial fatigue tests’, J. Mater. Res., 2002, 17, 1592–1600.
  • D. P. F. De Souza, A. L. Chinelatto and M. F. De Souza: ‘Impure zirconia electrical conductivity enhancement by rare-earth minority ions in the Y2O3 RE2O3 ZrO2 system’, J. Mater. Sci., 1995, 30, 4355–4362.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.