Advanced search
Publication Cover
Materials Research Innovations Volume 18, 2014 - Issue sup6: ICoSEM 2013
Submit an article Journal homepage
87
Views
0
CrossRef citations to date
0
Altmetric
Research Papers

Sintering studies of synthesised manganese-oxide-doped calcium phosphate via wet chemical precipitation method

A. NorakmalCentre of Advanced Manufacturing & Material Processing (AMMP)Department of Mechanical Engineering, Faculty of Engineering, University of Malaya, 50603Kuala Lumpur, MalaysiaCorrespondence[email protected]
,
S. RameshCentre of Advanced Manufacturing & Material Processing (AMMP)Department of Mechanical Engineering, Faculty of Engineering, University of Malaya, 50603Kuala Lumpur, Malaysia
,
C. Y. TanCentre of Advanced Manufacturing & Material Processing (AMMP)Department of Mechanical Engineering, Faculty of Engineering, University of Malaya, 50603Kuala Lumpur, Malaysia
,
A. MuchtarFaculty of Engineering and Built EnvironmentUniversiti Kebangsaan Malaysia, 43600Bangi, Selangor, Malaysia
,
B. K. YapDepartment of Electronics and CommunicationCollege of Engineering, Universiti Tenaga Nasional, Km-7, Jalan Ikram-UNITEN, 43009Kajang, Selangor, Malaysia
&
R. ToloueiFaculty of Science and EngineeringLaval University, Quebec G1 V 0A6, QC, Canada
Pages S6-147-S6-150 | Published online: 05 Dec 2014

References

  • L. L. Hench: ‘Biomaterials’, Science, 1980, 208, 826–831.
  • M. Rock: Germany Patent, DRP No. 583589, 1933.
  • M. Vallet-Regi: ‘Ceramics for medical applications’, J. Chem. Soc., 2001, 2, 97–108.
  • L. L. Hench: ‘Bioceramics: from concept to clinic’, J. Am. Soc., 1991, 74, 1487–1510.
  • M. Jarcho: ‘Calcium phosphate ceramics as hard tissue prosthetics’, Clin. Ortho. Relat. Res., 1981, 11, 78–259.
  • M. Wang: ‘Bioactive materials and processing’, Biomater. Tissue Eng., 2004, 1, 1–82.
  • M. Jarcho, C. H. Bolen, M. B. Thomas, J. Bobick, J. F. Kay and R. H. Doremus: ‘Hydroxylapatite synthesis and characterization in dense polycrystalline form’, J. Mater. Sci., 1976, 11, 2027–2035.
  • R. Z. LeGeros: ‘Calcium phosphate materials in restorative dentistry: a review’, Adv. Den. Res., 1988, 2, 164–180.
  • G. Daculsi, R. Z. LeGeros, E. Nery, K. Lynch and B. Krebel: ‘Transformation of biphasic calcium phosphate ceramics in vivo: ultrastructural and physicochemical characterization’, J. Biomed. Mater. Res., 1989, 23, 94–883.
  • S. Ramesh, C. Y. Tan, C. L. Peralta and W. D. Teng: ‘The effect of manganese oxide on the sinterability of hydroxyapatite’, Sci. Technol. Adv. Mater., 2007, 8, 257–263.
  • T. Chou Yong, K. L. Aw, W. H. Yeo, S. Ramesh, M. Hamdi and I. Sopyan: ‘Influence of magnesium doping in hydroxyapatite ceramics’, in 4th Kuala Lumpur International Conference on Biomedical Engineering 2008’, (ed. N. Abu Osman et al.), 326–329; 2008, Berlin, Heidelberg, Springer.
  • S. Ramesh: ‘A method for manufacturing hydroxyapatite bioceramic’, Malaysia Patent, No. PI. 20043325, 2004.
  • I. Sopyan and A. Natasha: ‘Preparation of nanostructured manganese-doped biphasic calcium phosphate powders via sol–gel method’, Ionics, 2009, 15, 735–741.
  • I. Mayer, F. J. G. Cuisinier, I. Popov, Y. Schleich, S. Gdalya, O. Burghaus and D. Reinen: ‘Phase relations between β-tricalcium phosphate and hydroxyapatite with manganese(II): structural and spectroscopic properties’, Eur. J. Inorg. Chem, 2006, 7, 1460–1465.
  • K. Niihara, R. Morena and D. P. H. Hasselman: ‘Evaluation of KIc of brittle solids by the indentation method with low crack-to-indent ratios’, J. Mater. Sci. Lett., 1982, 1, 13–16.
  • S. Raynaud, E. Champion, J. P. Lafon and D. Bernache-Assollant: ‘Calcium phosphate apatites with variable Ca/P atomic ratio III. Mechanical properties and degradation in solution of hot pressed ceramics’, Biomaterials, 2002, 23, 1081–1089.
  • R. Singh, C. Gill, S. Lawson and G. P. Dransfield: ‘Sintering, microstructure and mechanical properties of commercial Y-TZPs’, J. Mater. Sci., 1996, 31, 6055–6062.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.