References
- Portland Cement Association: ‘Concrete technology today’, Stockie, IL, USA, 1993.
- U. A. Girhammar and M. Pajari: ‘Tests and analysis on shear strength of composite slabs of hollow core units and concrete topping’, J. Constr. Build. Mater., 2008, 22, 1708–1722.
- C. L. Roberts-Wollmann, M. Guilora and W. Samuel Easterling: ‘Strength and performance of fiber-reinforced concrete composite slabs’, J. Struct. Eng. ASCE, 2004, 130, (3), 520–528.
- F. P. Ackermann and J. Schnell: ‘Steel fibre reinforced continuous composite slabs’, Int. Conf. on ‘Composite construction in steel and concrete’, 2008.
- I. S. Ibrahim: ‘Interface shear strength of hollow core slabs with concrete toppings’, Doctrate of Phil. thesis, Nottingham, UK: University of Nottingham, 2008.
- I. S. Ibrahim, M. B. Che Bakar, N. N. Sarbini and R. Noor Mohamed: ‘Shear capacity of composite slab reinforced with steel fibre concrete topping’, Malays. J. Civil Eng., 2011, 23, (1), 1–23.
- M. Gohnert: ‘Horizontal shear transfer across a roughened surface’, J. Cem. Concr. Compos., 2003, 25, 379–385.
- T. Ueda and B. Stitmannaithum: ‘Shear strength of precast prestressed hollow slabs with concrete topping’, ACI Struct. J., 1991, 88, (S42), 402–410.
- E. Slater, M. Moni and M. S. Alam: ‘Predicting the shear strength of steel fiber reinforced concrete beams’, J. Const. Build. Mater., 2011, 26, 423–436.
- K. A. Paine: ‘Steel fibre reinforced concrete for prestressed hollow core slabs’, Doct. of Phil. thesis, Nottingham, UK: University of Nottingham, 1998.
- K. H. Tan and M. A. Mansur: ‘Shear transfer in reinforced fiber concrete’, J. Mater. Civil Eng. ASCE, 1990, 2, (4), 202–214.
- R. N. Mohamed: ‘Shear strength of precast beam-half joints using steel fibre self-compacting concrete’, Doct. of Phil. thesis, Nottingham, UK: University of Nottingham, 2009.
- Concrete Society Working Group: ‘Guidance for the design of steel-fibre-reinforced concrete’, Technical Report No. 63, London, A Cement and Concrete Industry Publication.
- Eurocode 2: BS EN 1992-1-1: ‘Design of concrete structures – part 1: general rules and rules for buildings’, Brussels, Euro. Committee for Standardization, 2004.
- JCI-SF: ‘JCI standards for test methods of fiber reinforced concrete’, 1990, Japan, Japan Concrete Institute.
- A. Misra: ‘Mechanistic model for contact between rough surfaces’, J. Eng. Mech. ASCE, 1997, 123, (5), 475–484.
- J. Niwa: ‘Equation for shear strength of reinforced concrete deep beams based on FEM analysis’, Jpn Soc. Civil Eng. (JSCE), 1984, 1, 283–295.
- C. Jae-Sung, L. Joe and C. Shih-Ho: ‘Shear strength of steel fiber reinforced prestressed concrete beams’, Proc. 2009 Structures Congress, 2009, Reston, VA, USA, American Society of Civil Engineering, 1058–1066.
- M. Gohnert: ‘Horizontal shear transfer across a roughened surface’, J. Cem. Conccr. Compos., 2003, 25, 379–385.
- M. H. A. Beygi, A. Vaseghi, A. Rezai, N. Ranjbar and M. Harajpoor: ‘The investigation of effect of steel fiber on the shear behavior of self compacting concrete beams with normal and high strength’, Proc. 33rd Conf. on ‘Our world in concrete & structures’, 2008.
- R. T. Padmanabha, B. D. Hemant, L. Arghadeep, Y. L. Mo and T. C. H. Thomas: ‘Effect of steel fibers on shear behavior of prestressed concrete beams’, Reston, VA, USA, American Society of Civil Engineers, 2755–2763.
- F. J. Sydney and B. H. João: ‘Shear behavior of fiber reinforced concrete beams’, Cem. Concr. Compos., 1997, 19, 359–366.