Effect of compatibiliser on the accelerated weathering performance of polypropylene–silica nanocomposites

References

• V. Koutsos: ‘Polymeric Materials: An introduction’, in ‘ICE manual of construction materials’, Vol. 2, 571–577; 2009, London, Thomas Telford Publishing.
   Google Scholar
• M. Kutz: ‘Processing and materials’ in ‘Applied plastics engineering handbook’, 2011, Elsevier: Oxford, UK.
   Google Scholar
• A. G. Gibson and J. A. Månson: ‘Impregnation technology for thermoplastic matrix composites’, Compos. Manuf., 1992, 3, 223–23.
   Web of Science ®Google Scholar
• S. P. Liu and C. W. Liang: ‘Preparation and mechanical properties of PP/montmorillonite nanocomposites – after grafted with hard/soft grafting agent’, Int. Commun. Heat Mass Transf., 2011, 38, 434–441.
   Web of Science ®Google Scholar
• O. H. Lin, Z. A. M. Ishak and H. M. Akil: ‘Preparation and properties of nano-SiO2-filled PP composites with PP-methyl POSS as compatibiliser’, Mater. Des., 2009, 30, 748–751.
   Web of Science ®Google Scholar
• V. Vladimirov, C. Betchev, A. Vassiliou, G. Papageorgiou and D. Bikiaris: ‘Dynamic mechanical and morphological studies of isotactic polypropylene/fumed silica nanocomposites with enhanced gas barrier properties’, Compos. Sci. Technol., 2006, 66, 2935–2944.
   Web of Science ®Google Scholar
• K. Yang, Q. Yang, G. Li, Y. Sun and D. Feng: ‘Mechanical properties and morphology of PP with different sizes of calcium carbonate particles’, Polym. Compos., 2006, 27, 443–450.
   Web of Science ®Google Scholar
• S. N. Bhattacharya, M. R. Kamal and R. K. Gupta: ‘Polymeric nanocomposites – theory and practice’, 2008, Hanser Publication: Cincinnati, USA.
   Google Scholar
• A. S. Luyt, M. D. Dramićanin, Ž. Antić and V. Djoković: ‘Morphology, mechanical and thermal properties of composites of PP and nanostructured wollastonite filler’, Polym. Test., 2009, 28, 348–356.
   Web of Science ®Google Scholar
• R. A. Wolf: ‘Plastic surface modification – surface treatment, decoration, and adhesion’, 2010, Hanser Publishers: Cincinnati, USA.
   Google Scholar
• X. Gao, X. Meng, H. Wang, B. Wen, Y. Ding, S. Zhang and M. Yang: ‘Antioxidant behaviour of a nano-SiO2-immobilized antioxidant in PP’, Polym. Degrad. Stab., 2008, 93, 1467–1471.
   Web of Science ®Google Scholar
• F. Laoutid, E. Estrada, R. M. Michell, L. Bonnaud, A. J. Müller and P. Dubois: ‘The influence of nano-SiO2 on the nucleation, crystallization and tensile properties of PP–PC and PP–PA blends’, Polymer, 2013, 54, 3982–3993.
   Web of Science ®Google Scholar
• G. Lazzara and S. Milioto: ‘Dispersions of nano-SiO2 in biocompatible copolymers’, Polym. Degrad. Stab., 2010, 95, 610–617.
   Web of Science ®Google Scholar
• C. K. Hong, M. J. Kim, S. H. Oh, Y. S. Lee and C. Nah: ‘Effects of polypropylene-g-(maleic anhydride/styrene) compatibilizer on mechanical and rheological properties of polypropylene/clay nanocomposites’, J. Ind. Eng. Chem., 2008, 14, 236–242.
   Web of Science ®Google Scholar
• L. A. Utracki: ‘Compatibilization of polymer blends’, Can. J. Chem. Eng., 2002, 80, 1008–1016.
   Web of Science ®Google Scholar
• G. Gong, B. H. Xie, W. Yang, Z. M. Li, S. M. Lai and M. B. Yang: ‘Plastic deformation behavior of PP/calcium carbonate composites with and without maleic anhydride grafted PP incorporated using the essential work of fracture method’, Polym. Test., 2006, 25, 98–106.
   Web of Science ®Google Scholar
• G. Gong, B. H. Xie, M. B. Yang, W. Yang, W. Q. Zhang and M. Zhao: ‘Mechanical properties and fracture behavior of injection and compression molded PP/coal gangue powder composites with and without a polymeric coupling agent’, Compos. Appl. Sci. Manuf., 2007, 38, 1683–1693.
   Web of Science ®Google Scholar
• G. Wypych: ‘Handbook of material weathering’, 3rd edn, 2003, ChemTec Publishing: Toronto, Canada.
   Google Scholar
• X. Yang and X. Ding: ‘Prediction of outdoor weathering performance of PP filaments by accelerated weathering tests’, Geotext. Geomembr., 2006, 24, 103–109.
   Web of Science ®Google Scholar
• A. Tcherbi-Narteh, M. Hosur, E. Triggs and S. Jeelani: ‘Thermal stability and degradation of diglycidyl ether of bisphenol A epoxy modified with different nanoclays exposed to UV radiation’, Polym. Degrad. Stab., 2013, 98, 759–770.
   Web of Science ®Google Scholar
• J. E. Guillet: ‘Fundamental processes in the UV degradation and stabilization of polymers’, Pure Appl. Chem., 1972, 1, 135–144.
   Google Scholar
• F. P. La Mantia and M. Morreale: ‘Accelerated weathering of PP/wood flour composites’, Polym. Degrad. Stab., 2008, 93, 1252–1258.
   Web of Science ®Google Scholar
• W. L. Oliani, D. F. Parra and A. B. Lugão: ‘UV stability of HMS-PP (high melt strength PP) obtained by radiation process’, Radiat. Phys. Chem., 2010, 79, 383–387.
   Web of Science ®Google Scholar
• X. Colin and J. Verdu: ‘Polymer degradation during processing’, C.R. Chim., 2006, 9, 1380–1395.
   Web of Science ®Google Scholar
• P. Eteläaho, S. Haveri and P. Järvelä: ‘Comparison of the morphology and mechanical properties of unmodified and surface-modified nanosized calcium carbonate in a PP matrix’, Polym. Compos., 2011, 32, 464–471.
   Web of Science ®Google Scholar
• J. Sampers: ‘Importance of weathering factors other than UV radiation and temperature in outdoor exposure’, Polym. Degrad. Stab., 2002, 76, 455–465.
   Web of Science ®Google Scholar
• F. Mirian, D. Torkelson and M. John: ‘Maleic anhydride functionalization of PP with suppressed molecular weight reduction via solid-state shear pulverization’, Polymer, 2013, 54, 4143–4154.
   Web of Science ®Google Scholar
• A. Göpferich: ‘Mechanisms of polymer degradation and erosion’, Biomaterials, 1996, 17, 103–114.
   PubMed Web of Science ®Google Scholar