References
- L.-M. Zhang, Y.-B. Tan and Z.-M. Li: ‘Novel modified cellulosic polymers as drilling fluid additives with improved properties’, Polym. Int., 1999, 48, 921–926.
- E. Ozbayoglu, C. Gunes, E. C. Apak, M. V. Kok and A. G. Iscan: ‘Empirical correlations for estimating filtrate volume of water based drilling fluids’, Pet. Sci. Technol., 2005, 23, 423–436.
- T. Hamida, E. Kuru and M. Pickard: ‘Filtration loss characteristics of aqueous waxy hull-less barley (WHB) solutions’, J. Pet. Sci. Eng., 2010, 72, 33–41.
- A. G. Iscan and M. V. Kok: ‘Effects of polymers and CMC concentration on rheological and fluid loss parameters of water-based drilling fluids’, Energy Sources A, Recovery, Util. Environ. Eff., 2007, 29, 939–949.
- M. V. Kok and A. G. Iscan: ‘Estimation of filter cake thickness for waterbased drilling fluids’, Energy Sources A, Recovery Util. Environ. Eff., 2010, 32, 400–406.
- G.-H. Zhu: ‘Preparation of polyanionic cellulose with excellent performance’, Pet. Drill. Tech., 2005, 33, 36–40 (in Chinese).
- Z.-H. Wang and X.-H. Yang: ‘Progress of preparation and application of water-soluble cellulose-based drilling fluid’, Appl. Sci. Technol., 2009, 17, 15–20 (in Chinese).
- M. E. Keith, B. Andrea, M. Ton and S. Mac: ‘Advances in API/ISO standard grade purified poly-anionic cellulose (PAC) and drilling grade Xanthan Gum (XG) test procedure and specifications definition’, Proceedings of SPE/IADC Drilling Conference and Exhibition, Amsterdam, the Netherlands, 17–19 March 2009, 1313–1324.
- K.-Q. Zhang, Y.-L. Lu, F. Song and T.-W. Ding: ‘Development analysis of foreign drilling fluid additive 20 years’, Drill. Fluid Completion Fluids, 2005, 22, 1–5 (in Chinese).
- D. B. Bennion, F. B. Thomas, A. K. M. Jamaluddin and T. Ma: ‘Using under balanced drilling to reduce invasive formation damage and improve well productivity – an update’, J. Can. Pet. Technol., 2000, 39, 53–60.
- V. Mahto and V. P. Sharma: ‘Rheological study of a water based oil well drilling fluid’, J. Pet. Sci. Eng., 2004, 45, 123–128.
- M. V. Kok and T. Alikaya: ‘Effect of polymers on the rheological properties of KCl/polymer type drilling fluids’, Energy Sources, 2005, 27, 405–415.
- J. P. Plank: ‘Water based muds using synthetic polymers developed for high temperature drilling’, Oil Gas J., 1992, 90, 40–45.
- S.-R. Xu, H.-B. Feng, J.-H. Wang, P.-A. Nie and X.-M. Chen: ‘Production technology and performance evaluation of high-viscosity polyanionic cellulose (HV-PAC) for drilling fluid’, J. Xi'an Shiyou Univ. (Nat. Sci. Ed.), 2004, 19, 51–53 (in Chinese).
- J.-N. Yan: ‘The technology of drilling fluid’, 5; 2001, Beijing, The Press of Petroleum University (in Chinese).
- X.-M. Wu, Y.-L. Hu and H.-M. Tong: ‘The engineering principles and methods of drilling fluid slurry experiments and geotechnical’, 12; 2010, Wuhan, The Press of Chinese Geology University (in Chinese).