Recent development of experimental and numerical analysis of adhesion strength of thermal spray coatings

References

• P. Fauchais, A. Vardelle and B. Dussoubs: ‘Quo Vadis thermal spraying?’, J. Therm. Spray Technol., 2001, 10, 44–46.
   Web of Science ®Google Scholar
• P. Fauchais, J. V. R. Heberlein and M. I. Boulos: ‘Thermal spray fundamentals’, 1–3; 2014, New York, SpringerDOI:10.1007/978-0-387-68991-3.
   Google Scholar
• R. A. Miller: ‘Thermal barrier coatings for aircraft engines: history and directions’, J. Therm. Spray Technol., 1997, 6, 35–42.
   Web of Science ®Google Scholar
• M. Fukumoto, S. Y. Hwang, C. J. Li, K. Tani, A. Nakahira and M. K. A. Khor: ‘The current status of thermal spraying in Asia’, J. Therm. Spray Technol., 2008, 17, 5–13.
   Web of Science ®Google Scholar
• S. Sampath: ‘Thermal spray applications in electronics and sensors: past, present, and future’, J. Therm. Spray Technol., 2010, 19, 921–949.
   Web of Science ®Google Scholar
• J. Matejicek and S. Sampath: ‘In situ measurement of residual stresses and elastic moduli in thermal sprayed coatings-Part 1: apparatus and analysis’, Acta Mater., 2003, 51, 863–872.
   Web of Science ®Google Scholar
• S. J. Dong, B. Song, B. Hansz, H. L. Liao and C. Coddet: ‘Modelling of dry ice blasting and its application in thermal spray’, Mater. Res. Innov., 2012, 16, 61–66.
   Web of Science ®Google Scholar
• Y. Noda, A. Sato, S. Tobe, M. Hara and T. Inaba: ‘Development of alternative method of blasting and ultra-high adhesive strength thermal spray coatings by vacuum arc treatment’, Mater. Trans., 2009, 50, 825–831.
   Web of Science ®Google Scholar
• Z. X. Chen, K. Zhou, X. H. Lu and Y. C. Lam: ‘A review on the mechanical methods for evaluating coating adhesion’, Acta. Mech., 2014, 225, 431–452.
   Web of Science ®Google Scholar
• J. B. Cheng: ‘Synthesis and characterization of wire arc sprayed Fe-based amorphous/nanocrystalline coating for remanufacturing’, PhD thesis, Shanghai Jiao Tong University, Shanghai, China, 2010, 59–61 (in Chinese).
   Google Scholar
• B. S. Xu and S. H. Zhu: ‘Theories and technologies on surface engineering’, 1st edn, 4–16; 1999, Beijing, China National Defense Industry Press (in Chinese).
   Google Scholar
• Z. X. Hu, L. Zhui, J. X. Teng, X. H. Ma and X. J. Shi: ‘Evaluation of three dimensional surface roughness parameters based on digital image processing’, Int. J. Adv. Manuf. Technol., 2008, 40, 342–348.
   Web of Science ®Google Scholar
• L. S. Gu, G. L. Li, H. D. Wang, Z. G. Xing and B. S. Xu: ‘Preparation and characterization of PZT coatings sprayed by supersonic plasma spraying’, Mater. Sci. Eng. Powder Metall., 2013, 18, 560–565 (in Chinese).
   Google Scholar
• V. Tvergaard and J. W. Hutchinson: ‘The relation between crack growth resistance and fracture process parameters in elastic-plastic solids’, J. Mech. Phys. Solids, 1992, 40, 1377–1397.
   Web of Science ®Google Scholar
• I. Hofinger, K. Raab, J. Mὃller, and M. Bobeth: ‘Effect of substrate surface roughness on the adherence of NiCrAlY thermal spray coatings’, J. Therm. Spray Technol., 2002, 11, 387–392.
   Web of Science ®Google Scholar
• J. W. Hutchinson and Z. G. Suo: ‘Mixed mode cracking in layered materials’, Adv. Appl. Mech., 1992, 29, 163–191.
   Web of Science ®Google Scholar
• H. H. Yu and J. W. Hutchinson: ‘Delamination of thin film strips’, Thin Solid Films, 2003, 423, 54–63.
   Web of Science ®Google Scholar
• X. C. Zhang, B. S. Xu, H. D. Wang and Y. X. Wu: ‘Residual stress relaxation in film/substrate systems’, J. Appl. Phys., 2007, 101, 083530-1-6.
   Web of Science ®Google Scholar
• X. C. Zhang, B. S. Xu, H. D. Wang, Y. Jiang and Y. X. Wu: ‘Prediction of three-dimensional residual stresses in the multilayer coating-based systems with cylindrical geometry’, Compos. Sci. Technol., 2006, 66, 2249–2256.
   Web of Science ®Google Scholar
• A. N. Khan, J. Lu and H. Liao: ‘Effect of residual stresses on air plasma sprayed thermal barrier coatings’, Surf. Coat. Technol., 2003, 168, 291–299.
   Web of Science ®Google Scholar
• Y. Jiang, B. S. Xu and H. D. Wang: ‘Residual stresses within sprayed coatings’, J. Cent. South Univ. Technol., 2005, 12, 53–58.
   Web of Science ®Google Scholar
• X. C. Zhang, B. S. Xu, H. D. Wang Y. Jiang and Y. X. Wu: ‘An analytical model for predicting thermal residual stresses in multilayer coating systems’, Thin Solid Films, 2005, 488, 274–282.
   Web of Science ®Google Scholar
• S. Kuroda and T. W. Clyne: ‘Quenching stress in thermally sprayed coatings’, Thin Solid Films, 1991, 200, 49–66.
   Web of Science ®Google Scholar
• J. Pina, A. Dias and J. L. Lebrun: ‘Study by X-ray diffraction and mechanical analysis of the residual stress generation during thermal spraying’, Mater. Sci. Eng., 2003, A347, 21–31.
   Google Scholar
• X. L. Peng and T. W. Clyne: ‘Formation and adhesion of hot filament CVD diamond films on titanium substrates’, Thin Solid Films, 1997, 293, 261–269.
   Web of Science ®Google Scholar
• X. C. Zhang, B. S. Xu, H. D. Wang and Y. X. Wu: ‘Analyses of interfacial stress and normal stress in an elongated film strip/substrate system’, Thin Solid Films, 2006, 515, 2251–2256.
   Web of Science ®Google Scholar
• X. C. Zhang, B. S. Xu, H. D. Wang and Y. X. Wu: ‘Analytical modeling of edge effects on the residual stresses within the film strip/substrate systems, Part I: Interfacial stresses’, J. Appl. Phys., 2006, 100, 113524-1-8.
   Web of Science ®Google Scholar
• X. C. Zhang, B. S. Xu, H. D. Wang and Y. X. Wu: ‘Analytical modeling of edge effects on the residual stresses within the film strip/substrate systems, Part II: normal stresses’, J. Appl. Phys., 2006, 100, 1135245-1-9.
   Web of Science ®Google Scholar
• W. A. Nelson and R. M. Orenstein: ‘TBC experience in land-based gas turbines’, J. Therm. Spray Technol., 1997, 6, 176–180.
   Web of Science ®Google Scholar